OSHA Final Exam Questions and Answers |
100% Verified | Latest 2026-2027 Update | Graded
A+ | Guaranteed Pass.
OSHA's mission is to: - ANSWER>>Protect the safety and health of America's
workers
The creation of OSHA provided this important right to workers - ANSWER>>The
right to a safe and healthful workplace
A Safety Data Sheet (SDS) gives information about: - ANSWER>>Hazardous
chemicals
Among the rights related to OSHA recordkeeping, workers have the right to
review: -
ANSWER>>The OSHA 300 Log and the OSHA 300A Summary except for items that
are personal
During an OSHA inspection: - ANSWER>>You have the right to talk to the inspector
privately
OSHA requires that employers pay for most required personal protective
equipment (PP), including: - ANSWER>>Hard hats
The OSHA standards for Construction and General Industry are also known as: -
ANSWER>>Part 1926 and Part 1910
What type of OSHA inspection is conducted when immediate death or serious
harm is likely? - ANSWER>>Imminent danger
,When the employer receives an OSHA citation, it must be; - ANSWER>>Posted for
3 days or until the violation is fixed
If you feel that an OSHA inspection is needed to get hazards corrected at your
workplace, which is your best option? - ANSWER>>Submit a written, signed
complaint with specific hazard information
- ANSWER>>Electrical Safety
OSHA's electrical standards are based on: - ANSWER>>The NEC
What are the four main types of electrical injuries? - ANSWER>>Electrocution,
electric shock, burns, indirect (e.g., a fall from a ladder)
Electricity travels in closed circuits, and its normal route is through a conductor.
Electric shock occurs when: - ANSWER>>The body becomes part of the circuit
A shock's severity depends on: - ANSWER>>Length of exposure to
electricity The amount of current and its frequency
The right of workers to seek safety and health on the job without fear of
punishment is spelled out in: - ANSWER>>Section 11(c) of the OSH Act
One of the main responsibilities employers have under OSHA is to: -
ANSWER>>Provide training required by OSHA standards
Electrical burns are the most serious of the three major types of burns, and most
often occur: - ANSWER>>On the hands, from direct contact with current
Hot wires, ungrounded wires that can cause a shock if you touch them, are
usually: - ANSWER>>Black or red
More than 50 percent of electrocutions are caused by a worker coming in direct
contact with: - ANSWER>>Energized power lines
, The OSHA standard requires flexible cords to be rated for: - ANSWER>>Hard or
extra-hard usage
All portable electric tools that are damaged shall be: - ANSWER>>Removed from
use and tagged "Do Not Use"
If you have a three-prong plug and a two-hole receptacle, it is acceptable to: -
ANSWER>>Use an adapter with an adapter wire connected to a known ground
All hazards involved in the use of power tools can be prevented by following five
basic safety rules: Keep all tools in good condition with regular maintenance;
examine each tool for damage before use; operate according to the
manufacturer's instructions; provide and use the proper protective equipment;
and: - ANSWER>>Use the right tool for the job
Live parts of electric equipment operating at 50 volts or more must be: -
ANSWER>>Guarded against accidental contact
While any employee is exposed to contact with parts of electric equipment or
circuits that have been de-energized, the circuits energizing the parts shall be: -
ANSWER>>Locked out or tagged out or both
Low voltage does not mean low hazard. - ANSWER>>True
The two best means of avoiding electrical shock or injury when working with
power tools are: - ANSWER>>Insulation and grounding
The majority of today's power line accidents occur because: - ANSWER>>Of failure
to maintain proper work distances
A ground-fault circuit interrupter (GFCI) protects workers from shock by: -
ANSWER>>Matching the amount of current going into an electrical device against
the amount returning from the device and shutting down power if a ground fault
is detected
100% Verified | Latest 2026-2027 Update | Graded
A+ | Guaranteed Pass.
OSHA's mission is to: - ANSWER>>Protect the safety and health of America's
workers
The creation of OSHA provided this important right to workers - ANSWER>>The
right to a safe and healthful workplace
A Safety Data Sheet (SDS) gives information about: - ANSWER>>Hazardous
chemicals
Among the rights related to OSHA recordkeeping, workers have the right to
review: -
ANSWER>>The OSHA 300 Log and the OSHA 300A Summary except for items that
are personal
During an OSHA inspection: - ANSWER>>You have the right to talk to the inspector
privately
OSHA requires that employers pay for most required personal protective
equipment (PP), including: - ANSWER>>Hard hats
The OSHA standards for Construction and General Industry are also known as: -
ANSWER>>Part 1926 and Part 1910
What type of OSHA inspection is conducted when immediate death or serious
harm is likely? - ANSWER>>Imminent danger
,When the employer receives an OSHA citation, it must be; - ANSWER>>Posted for
3 days or until the violation is fixed
If you feel that an OSHA inspection is needed to get hazards corrected at your
workplace, which is your best option? - ANSWER>>Submit a written, signed
complaint with specific hazard information
- ANSWER>>Electrical Safety
OSHA's electrical standards are based on: - ANSWER>>The NEC
What are the four main types of electrical injuries? - ANSWER>>Electrocution,
electric shock, burns, indirect (e.g., a fall from a ladder)
Electricity travels in closed circuits, and its normal route is through a conductor.
Electric shock occurs when: - ANSWER>>The body becomes part of the circuit
A shock's severity depends on: - ANSWER>>Length of exposure to
electricity The amount of current and its frequency
The right of workers to seek safety and health on the job without fear of
punishment is spelled out in: - ANSWER>>Section 11(c) of the OSH Act
One of the main responsibilities employers have under OSHA is to: -
ANSWER>>Provide training required by OSHA standards
Electrical burns are the most serious of the three major types of burns, and most
often occur: - ANSWER>>On the hands, from direct contact with current
Hot wires, ungrounded wires that can cause a shock if you touch them, are
usually: - ANSWER>>Black or red
More than 50 percent of electrocutions are caused by a worker coming in direct
contact with: - ANSWER>>Energized power lines
, The OSHA standard requires flexible cords to be rated for: - ANSWER>>Hard or
extra-hard usage
All portable electric tools that are damaged shall be: - ANSWER>>Removed from
use and tagged "Do Not Use"
If you have a three-prong plug and a two-hole receptacle, it is acceptable to: -
ANSWER>>Use an adapter with an adapter wire connected to a known ground
All hazards involved in the use of power tools can be prevented by following five
basic safety rules: Keep all tools in good condition with regular maintenance;
examine each tool for damage before use; operate according to the
manufacturer's instructions; provide and use the proper protective equipment;
and: - ANSWER>>Use the right tool for the job
Live parts of electric equipment operating at 50 volts or more must be: -
ANSWER>>Guarded against accidental contact
While any employee is exposed to contact with parts of electric equipment or
circuits that have been de-energized, the circuits energizing the parts shall be: -
ANSWER>>Locked out or tagged out or both
Low voltage does not mean low hazard. - ANSWER>>True
The two best means of avoiding electrical shock or injury when working with
power tools are: - ANSWER>>Insulation and grounding
The majority of today's power line accidents occur because: - ANSWER>>Of failure
to maintain proper work distances
A ground-fault circuit interrupter (GFCI) protects workers from shock by: -
ANSWER>>Matching the amount of current going into an electrical device against
the amount returning from the device and shutting down power if a ground fault
is detected
