CSA W47.1 & W59 Welding Certification Exam
Questions 2026 – Complete Practice Questions
with Verified Answers for Industry Certification
Success
Does the CSA Standard W47.1 specify the requirements for a company
seeking certification? - SELECTED ANSWER 👀** Yes, This standard
provides the requirements for the certification of companies engaged in the
fusion welding of steel and the qualification of their personnel and welding
procedures (Cl 1.1)
Who is responsible for the welded products a company produces? -
SELECTED ANSWER 👀** The company (1.2) The requirements of this
standard are based on the principle that a certified company has full
responsibility for the quality of the welded product it produces and this
responsibility cannot be transferred to its employed or retained personnel
or to the administrator of this standard.
Does this standard approve the products and services of a certified
company? - SELECTED ANSWER 👀** (Cl. 1.3) This standard governs the
certification of companies. Certification pertains to the capability of the
company with respect to welding. Certification should not be construed as
approving any products or services of the certified company.
What requirements are stipulated in CSA Standard W47.1 - SELECTED
ANSWER 👀** (Cl. 1.4) This standard stipulates requirements for:
- welding engineers
- welding supervisors
,- tack welders, welders and welding operators
- documentation
What standard or code reference publications are referred to in CSA
Standard W47.1? - SELECTED ANSWER 👀** (Cl. 2.1, 2.2) This standard
refers to the following publications, and where such reference is made, it
shall be to the edition listed below, including all amendments published
there to:
CSA (Canadian Standards Association)
CAN/CSA-G30.18-M92(R2007) - Billet-steel bars for concrete
reinforcement
G40.20/G40.21-04(R2009) - General requirements for rolled or welded
structural quality steel/ Structural quality steel
W48-06 - Filler metals and allied materials for metal arc welding
W59-03(R2008) - Welded steel construction (metal arc welding)
CAN/CSA-W117.2-06 - Safety in welding, cutting, and allied processes
W178.1-08 - Certification of welding inspection organizations
ASTM International (American Society for Testing and Materials)
A 370-08a - Standard Test Methods and Definitions for Mechanical Testing
of Steel Products
E 10-07a - Standard Test Method for Brinell Hardness of Metallic Materials.
E23-07ae1 - Standard Test Methods for Notched Bar Impact Testing of
Metallic Materials
AWS (American Welding Society)
, A3.0-01
Standard Definitions; Including Terms for Adhesive Bonding, Brazing,
Soldering, Thermal Cutting, and Thermal Spraying
A5.12/A5.12M-98 (R2007) - Specification for Tungsten and Tungsten-Alloy
Electrodes for Arc Welding and Cutting
A.518/A518M-05 - Specification for Carbon Steel Electrodes and Rods for
Gas Shielded Arc Welding
A5.23/A5.23M-07 - Specification for Low-Alloy Steel Electrodes and Fluxes
for Submerged Arc Welding
A5.28/A5.28M-05 - Specification for Low-Alloy Steel Electrodes and Rods
for Gas Shielded Arc Welding
D1.1/D1.1M - Structural Welding Code - Steel
D1.3/D1.3M - Structural Welding Code - Sheet Steel
D1.6/D1.6M - Structural Welding Code - Stainless Steel
SCC (Standards Council of Canada)
Can-P-4E - General requirements for the Competence of Testing and
Calibration Laboratories.
What is the difference between "class" and "classification"? - SELECTED
ANSWER 👀** (Cl.3) Class - a category of welder qualification, e.g., the flat
(F), horizontal (H), vertical (V), or overhead (O) welding positions.
Classification - refers to the various types of welding personnel e.g., T, S,
FW, ASW or WT
What are the welding personnel classifications specified in CSA standard
W47.1? - SELECTED ANSWER 👀** (Cl.3) Classification - T, S, FW, ASW,
or WT welding personnel as follows:
Questions 2026 – Complete Practice Questions
with Verified Answers for Industry Certification
Success
Does the CSA Standard W47.1 specify the requirements for a company
seeking certification? - SELECTED ANSWER 👀** Yes, This standard
provides the requirements for the certification of companies engaged in the
fusion welding of steel and the qualification of their personnel and welding
procedures (Cl 1.1)
Who is responsible for the welded products a company produces? -
SELECTED ANSWER 👀** The company (1.2) The requirements of this
standard are based on the principle that a certified company has full
responsibility for the quality of the welded product it produces and this
responsibility cannot be transferred to its employed or retained personnel
or to the administrator of this standard.
Does this standard approve the products and services of a certified
company? - SELECTED ANSWER 👀** (Cl. 1.3) This standard governs the
certification of companies. Certification pertains to the capability of the
company with respect to welding. Certification should not be construed as
approving any products or services of the certified company.
What requirements are stipulated in CSA Standard W47.1 - SELECTED
ANSWER 👀** (Cl. 1.4) This standard stipulates requirements for:
- welding engineers
- welding supervisors
,- tack welders, welders and welding operators
- documentation
What standard or code reference publications are referred to in CSA
Standard W47.1? - SELECTED ANSWER 👀** (Cl. 2.1, 2.2) This standard
refers to the following publications, and where such reference is made, it
shall be to the edition listed below, including all amendments published
there to:
CSA (Canadian Standards Association)
CAN/CSA-G30.18-M92(R2007) - Billet-steel bars for concrete
reinforcement
G40.20/G40.21-04(R2009) - General requirements for rolled or welded
structural quality steel/ Structural quality steel
W48-06 - Filler metals and allied materials for metal arc welding
W59-03(R2008) - Welded steel construction (metal arc welding)
CAN/CSA-W117.2-06 - Safety in welding, cutting, and allied processes
W178.1-08 - Certification of welding inspection organizations
ASTM International (American Society for Testing and Materials)
A 370-08a - Standard Test Methods and Definitions for Mechanical Testing
of Steel Products
E 10-07a - Standard Test Method for Brinell Hardness of Metallic Materials.
E23-07ae1 - Standard Test Methods for Notched Bar Impact Testing of
Metallic Materials
AWS (American Welding Society)
, A3.0-01
Standard Definitions; Including Terms for Adhesive Bonding, Brazing,
Soldering, Thermal Cutting, and Thermal Spraying
A5.12/A5.12M-98 (R2007) - Specification for Tungsten and Tungsten-Alloy
Electrodes for Arc Welding and Cutting
A.518/A518M-05 - Specification for Carbon Steel Electrodes and Rods for
Gas Shielded Arc Welding
A5.23/A5.23M-07 - Specification for Low-Alloy Steel Electrodes and Fluxes
for Submerged Arc Welding
A5.28/A5.28M-05 - Specification for Low-Alloy Steel Electrodes and Rods
for Gas Shielded Arc Welding
D1.1/D1.1M - Structural Welding Code - Steel
D1.3/D1.3M - Structural Welding Code - Sheet Steel
D1.6/D1.6M - Structural Welding Code - Stainless Steel
SCC (Standards Council of Canada)
Can-P-4E - General requirements for the Competence of Testing and
Calibration Laboratories.
What is the difference between "class" and "classification"? - SELECTED
ANSWER 👀** (Cl.3) Class - a category of welder qualification, e.g., the flat
(F), horizontal (H), vertical (V), or overhead (O) welding positions.
Classification - refers to the various types of welding personnel e.g., T, S,
FW, ASW or WT
What are the welding personnel classifications specified in CSA standard
W47.1? - SELECTED ANSWER 👀** (Cl.3) Classification - T, S, FW, ASW,
or WT welding personnel as follows:
