IMSA Traffic Signal Technician I Study Guide
Questions and Answers
1. Which document determines the hierarchy of utilities on a utility
pole?
ANS NESC
2. Part four of the determines all the guidance
for traffic signals.
ANS MUTCD
3. What does OSHA stand for?
ANS Occupational Safety & Health Administration
4. Who published the NEC?
ANS National Fire Protection Association
5. Which statement about negligence is correct?
ANS Failure to use reasonable care in one's actions
6. A technician was sent out to an intersection to replace a broken
traffic signal ahead. When he arrived on the scene, he realizes he
does not have the proper hardware to reinstall the fixture. He only
secures the fixture with two screws and leaves for the evening and
1/
10
, forgets to come back to complete the repair. The fixture falls on a
car and causes a serious accident with injuries. This is a what?
ANS Tort Liability and Gross Negligence (Both B and C)
7. Which electrical gloves would you use to work near voltages of
1,000 VAC?
ANS -
Class 0
8. OSHA
mandates that you MUST maintain a minimum of feet
clearance from overhead power lines?
ANS 10
9. Individuals, using
arial lift trucks should ?
ANS Be properly trained, inspect their vehicle before every use, and wear the appropriate fall
protection equipment (All of the above)
10. Which item is NOT part of a Signal Tech's personal protective
equipment?
ANS -
Sneakers
2/
10
Questions and Answers
1. Which document determines the hierarchy of utilities on a utility
pole?
ANS NESC
2. Part four of the determines all the guidance
for traffic signals.
ANS MUTCD
3. What does OSHA stand for?
ANS Occupational Safety & Health Administration
4. Who published the NEC?
ANS National Fire Protection Association
5. Which statement about negligence is correct?
ANS Failure to use reasonable care in one's actions
6. A technician was sent out to an intersection to replace a broken
traffic signal ahead. When he arrived on the scene, he realizes he
does not have the proper hardware to reinstall the fixture. He only
secures the fixture with two screws and leaves for the evening and
1/
10
, forgets to come back to complete the repair. The fixture falls on a
car and causes a serious accident with injuries. This is a what?
ANS Tort Liability and Gross Negligence (Both B and C)
7. Which electrical gloves would you use to work near voltages of
1,000 VAC?
ANS -
Class 0
8. OSHA
mandates that you MUST maintain a minimum of feet
clearance from overhead power lines?
ANS 10
9. Individuals, using
arial lift trucks should ?
ANS Be properly trained, inspect their vehicle before every use, and wear the appropriate fall
protection equipment (All of the above)
10. Which item is NOT part of a Signal Tech's personal protective
equipment?
ANS -
Sneakers
2/
10
