FIRE INSPECTOR 2 QUESTIONS WITH 100% CORRECT SOLUTIONS | GUARANTEED
SUCCESS.
A code is: - (answer)A legal requirement of a building feature or operating feature at a certain location
A standard is: - (answer)A set of specifications or requirements that is considered industry best practice
and meets a minimum level of performance guidelines
The most important tool the fire inspector possesses is: - (answer)Knowledge
Any non-compliance (code violation) that has been noticed during the fire inspection: - (answer)Must be
documented in the written report of the inspection
One of the things that a Fire Inspector II could be expected to do that a Fire Inspector I would not, is to: -
(answer)Process a permit application
A permit to use a chemical during a manufacturing process is an example of a(n): - (answer)Hazardous
materials use permit
Which of the following individuals may have full police powers to investigate and arrest suspected
arsonist and people causing false alarms? - (answer)Fire investigator
To ensure that an installation or construction is safe to be occupied, a fire inspector uses: - (answer)Both
prescriptive code and performance-based code
The International Code Council is an example of a(n): - (answer)Model code organization
The principles that a fire inspector should follow during an inspection are dictated by: - (answer)Ethics
In the process of adopting a new or modified code or standard, the correct sequence of steps would be:
- (answer)Identification of need, Review by elected officials, public hearing, adoption of code into
statute
, FIRE INSPECTOR 2 QUESTIONS WITH 100% CORRECT SOLUTIONS | GUARANTEED
SUCCESS.
Which of the following positions describes a fire inspector who works within a fire department and who
may respond to the fire scenes for investigative purposes? - (answer)Fire Marshal
Type II building is: - (answer)Same as Type I but with less fire resistance
Dry wall is considered: - (answer)Limited-Combustible
Masonry exterior bearing walls are usually found in: - (answer)Type III and IV construction
What can be said about steel members? - (answer)They can melt in a severe fire
Part of the building's weight and the building's content are supported by a: - (answer)Load-bearing wall
The most fire-resistive category of building construction is: - (answer)Type I
Annealed glass is known as: - (answer)Single-pane glass
The most common building material is: - (answer)Wood
Pyrolysis refers to: - (answer)Decomposition without combustion
The most common type of construction used today is: - (answer)Type V
Which of the following statements is true about gypsum board? - (answer)It is a good insulator and
noncombustible
Trusses are used: - (answer)For both floors and roofs
SUCCESS.
A code is: - (answer)A legal requirement of a building feature or operating feature at a certain location
A standard is: - (answer)A set of specifications or requirements that is considered industry best practice
and meets a minimum level of performance guidelines
The most important tool the fire inspector possesses is: - (answer)Knowledge
Any non-compliance (code violation) that has been noticed during the fire inspection: - (answer)Must be
documented in the written report of the inspection
One of the things that a Fire Inspector II could be expected to do that a Fire Inspector I would not, is to: -
(answer)Process a permit application
A permit to use a chemical during a manufacturing process is an example of a(n): - (answer)Hazardous
materials use permit
Which of the following individuals may have full police powers to investigate and arrest suspected
arsonist and people causing false alarms? - (answer)Fire investigator
To ensure that an installation or construction is safe to be occupied, a fire inspector uses: - (answer)Both
prescriptive code and performance-based code
The International Code Council is an example of a(n): - (answer)Model code organization
The principles that a fire inspector should follow during an inspection are dictated by: - (answer)Ethics
In the process of adopting a new or modified code or standard, the correct sequence of steps would be:
- (answer)Identification of need, Review by elected officials, public hearing, adoption of code into
statute
, FIRE INSPECTOR 2 QUESTIONS WITH 100% CORRECT SOLUTIONS | GUARANTEED
SUCCESS.
Which of the following positions describes a fire inspector who works within a fire department and who
may respond to the fire scenes for investigative purposes? - (answer)Fire Marshal
Type II building is: - (answer)Same as Type I but with less fire resistance
Dry wall is considered: - (answer)Limited-Combustible
Masonry exterior bearing walls are usually found in: - (answer)Type III and IV construction
What can be said about steel members? - (answer)They can melt in a severe fire
Part of the building's weight and the building's content are supported by a: - (answer)Load-bearing wall
The most fire-resistive category of building construction is: - (answer)Type I
Annealed glass is known as: - (answer)Single-pane glass
The most common building material is: - (answer)Wood
Pyrolysis refers to: - (answer)Decomposition without combustion
The most common type of construction used today is: - (answer)Type V
Which of the following statements is true about gypsum board? - (answer)It is a good insulator and
noncombustible
Trusses are used: - (answer)For both floors and roofs
