SONICWALL SNSA 2026 EXAMINATION TEST QUESTIONS
AND ANSWERS RATED A+
✔✔Address Objects - ✔✔____________________ allow for entities to be defined one
time and to be re used in multiple referential instances through the SonicOS interface
✔✔Object > Match Objects > Services > Service Objects > Add - ✔✔Create a Service
Object (5)
✔✔Service Object - ✔✔_____________________ is a protocol/port range combination
that defines a service
✔✔Service Group - ✔✔________________________ is a group of services that, after
defined, enable you to quickly establish firewall rules without manually configuring each
service
✔✔F - ✔✔T/F: By default, no services are predefined
✔✔T - ✔✔T/F: You can create custom service objects and custom service groups to
meet your specific business requirements
✔✔Policy > Rules and Policies > NAT Rules > Add - ✔✔Configure a NAT Rule (4)
✔✔NAT - ✔✔___________________ translates the IP addresses used on your private
LAN to a single, public IP address that is used on the internet
✔✔T - ✔✔T/F: NAT allows multiple computers to access the internet, even if only one
IP address has been provided by your ISP
✔✔One-to-One - ✔✔NAT Policy: Maps directly to another IP address
✔✔Many-to-One - ✔✔NAT Policy: allows multiple hosts on your LAN to communicate
with hosts on the internet by sharing the WAN public IP addresses
✔✔Many-to-Many - ✔✔NAT Policy: allows groups of IP addresses to map to another
group of IP addresses
✔✔Policy > Rules and Policies > Access Rules > Zone Selector - ✔✔Edit the Zone
Matrix Selector (4)
✔✔Policy > Rules and Policies > Access Rules > Add - ✔✔Create an Access Rule (4)
✔✔Action
Type
, Priority
Schedule
Enable - ✔✔What are the five Configuration Options for Access Rules?
✔✔Action - ✔✔AR Config Option: Allow, Deny, Discard
✔✔Type - ✔✔AR Config Option: IPv4 and IPv6
✔✔Priority - ✔✔AR Config Option: Auto prioritize, Insert at the end, Manual
✔✔Schedule - ✔✔AR Config Option: Choose a predefined schedule
✔✔Enable - ✔✔AR Config Option: Enable, Disable
✔✔ - ✔✔_______________________ are network management tools that allow you to
define inbound and outbound access policies
✔✔T - ✔✔T/F: The default network access rules allow traffic outbound to the internet
and block incoming traffic from the internet
✔✔T - ✔✔T/F: SonicWall devices allow users to create custom rules to effectively
address their network security requirements.
✔✔F - ✔✔T/F: Custom access rules CANNOT be defined to extend or override the
default access rules
✔✔Bandwidth Rule - ✔✔_______________________ is an access rule with bandwidth
object assigned to it
✔✔Classifier
Bandwidth Rule - ✔✔A Bandwidth Management Policy (BWM) consists of two parts:
____________________ and ______________________
✔✔Object > Profile Objects > Bandwidth > Add - ✔✔Create a Bandwidth Object (4)
✔✔Policy > Rules and Policies > Access Rules > Edit Rule > Egress BWM - ✔✔Assign
Bandwidth Object to an Access Rule (5)
✔✔Network > System > Interfaces > Edit Interface - X1 > Advanced > Enable Egress >
Enable Ingress - ✔✔Configure the WAN interface bandwidth (7)
✔✔Bandwidth Management (BWM) - ✔✔_________________ is a means of allocating
bandwidth resources to critical network application
AND ANSWERS RATED A+
✔✔Address Objects - ✔✔____________________ allow for entities to be defined one
time and to be re used in multiple referential instances through the SonicOS interface
✔✔Object > Match Objects > Services > Service Objects > Add - ✔✔Create a Service
Object (5)
✔✔Service Object - ✔✔_____________________ is a protocol/port range combination
that defines a service
✔✔Service Group - ✔✔________________________ is a group of services that, after
defined, enable you to quickly establish firewall rules without manually configuring each
service
✔✔F - ✔✔T/F: By default, no services are predefined
✔✔T - ✔✔T/F: You can create custom service objects and custom service groups to
meet your specific business requirements
✔✔Policy > Rules and Policies > NAT Rules > Add - ✔✔Configure a NAT Rule (4)
✔✔NAT - ✔✔___________________ translates the IP addresses used on your private
LAN to a single, public IP address that is used on the internet
✔✔T - ✔✔T/F: NAT allows multiple computers to access the internet, even if only one
IP address has been provided by your ISP
✔✔One-to-One - ✔✔NAT Policy: Maps directly to another IP address
✔✔Many-to-One - ✔✔NAT Policy: allows multiple hosts on your LAN to communicate
with hosts on the internet by sharing the WAN public IP addresses
✔✔Many-to-Many - ✔✔NAT Policy: allows groups of IP addresses to map to another
group of IP addresses
✔✔Policy > Rules and Policies > Access Rules > Zone Selector - ✔✔Edit the Zone
Matrix Selector (4)
✔✔Policy > Rules and Policies > Access Rules > Add - ✔✔Create an Access Rule (4)
✔✔Action
Type
, Priority
Schedule
Enable - ✔✔What are the five Configuration Options for Access Rules?
✔✔Action - ✔✔AR Config Option: Allow, Deny, Discard
✔✔Type - ✔✔AR Config Option: IPv4 and IPv6
✔✔Priority - ✔✔AR Config Option: Auto prioritize, Insert at the end, Manual
✔✔Schedule - ✔✔AR Config Option: Choose a predefined schedule
✔✔Enable - ✔✔AR Config Option: Enable, Disable
✔✔ - ✔✔_______________________ are network management tools that allow you to
define inbound and outbound access policies
✔✔T - ✔✔T/F: The default network access rules allow traffic outbound to the internet
and block incoming traffic from the internet
✔✔T - ✔✔T/F: SonicWall devices allow users to create custom rules to effectively
address their network security requirements.
✔✔F - ✔✔T/F: Custom access rules CANNOT be defined to extend or override the
default access rules
✔✔Bandwidth Rule - ✔✔_______________________ is an access rule with bandwidth
object assigned to it
✔✔Classifier
Bandwidth Rule - ✔✔A Bandwidth Management Policy (BWM) consists of two parts:
____________________ and ______________________
✔✔Object > Profile Objects > Bandwidth > Add - ✔✔Create a Bandwidth Object (4)
✔✔Policy > Rules and Policies > Access Rules > Edit Rule > Egress BWM - ✔✔Assign
Bandwidth Object to an Access Rule (5)
✔✔Network > System > Interfaces > Edit Interface - X1 > Advanced > Enable Egress >
Enable Ingress - ✔✔Configure the WAN interface bandwidth (7)
✔✔Bandwidth Management (BWM) - ✔✔_________________ is a means of allocating
bandwidth resources to critical network application
