VIVINT SHP COMPREHENSIVE EXAM 2026
QUESTIONS WITH SOLUTIONS GRADED A+
◉ False. Answer: When performing a full system test, you may bypass
any open doors or windows
◉ Always enable the emergency. Answer: When programming an
skey1,you must
◉ False. Answer: When running power to the take345,polarity doesn't
apply
◉ Audible alarm (7). Answer: When programming the emergency key
for the skey1,which zone/sensor type is used.
◉ True. Answer: When installing a smkt3,you must use the included
screws and anchors
◉ True. Answer: When installing the firefighter, it is required to test the
customers existing smoke detectors
, ◉ Between 6"(15cm) and 2'(61cm) from floor. Answer: When installing
a Dw21, where is the approved location for the sensor
◉ Provided double sided tape. Answer: When installing a dw11 on a
vinyl or metal frame, what should primarily use to mount the sensor
◉ Beans & wire caps. Answer: Which of the following materials can
you use to group multiple ground terminals in a takeover.
◉ Smoke detector. Answer: Which of the following sensors are you not
allowed to program using a translator
◉ True. Answer: When installing the take345, you must always test the
new 12v battery before using it.
◉ 16.5. Answer: What is the output voltage of transformer used to
power the sky control
◉ 12". Answer: What is the minimum distance for placement of a co3
from the corners of the wall
◉ False. Answer: The smkt3 has 2 function:smoke and heat detection
QUESTIONS WITH SOLUTIONS GRADED A+
◉ False. Answer: When performing a full system test, you may bypass
any open doors or windows
◉ Always enable the emergency. Answer: When programming an
skey1,you must
◉ False. Answer: When running power to the take345,polarity doesn't
apply
◉ Audible alarm (7). Answer: When programming the emergency key
for the skey1,which zone/sensor type is used.
◉ True. Answer: When installing a smkt3,you must use the included
screws and anchors
◉ True. Answer: When installing the firefighter, it is required to test the
customers existing smoke detectors
, ◉ Between 6"(15cm) and 2'(61cm) from floor. Answer: When installing
a Dw21, where is the approved location for the sensor
◉ Provided double sided tape. Answer: When installing a dw11 on a
vinyl or metal frame, what should primarily use to mount the sensor
◉ Beans & wire caps. Answer: Which of the following materials can
you use to group multiple ground terminals in a takeover.
◉ Smoke detector. Answer: Which of the following sensors are you not
allowed to program using a translator
◉ True. Answer: When installing the take345, you must always test the
new 12v battery before using it.
◉ 16.5. Answer: What is the output voltage of transformer used to
power the sky control
◉ 12". Answer: What is the minimum distance for placement of a co3
from the corners of the wall
◉ False. Answer: The smkt3 has 2 function:smoke and heat detection
