HP Point of Sale Service and Support Assessment Exam 2026
ACTUAL COMPLETE FREQUENTLY MOST TESTED REAL
EXAM QUESTIONS AND VERIFIED SOLUTIONS | GET IT
100% ACCURATE!! ALREADY GRADED A+ | NEWEST
EXAM | JUST RELEASED!!
What does a Red LED on the HP Wireless Barcode Scanner
Base mean?
A: The Barcode Scanner is on and ready to re-scan.
B: A conversion or format error has occurred.
C: The scanner battery is charging.
D: The barcode was successfully decoded. - ANSWER-C
What is used for HP POS Touchscreen alignment or calibration
depending on
the monitor model and operating system?
(Select two)
A: The Windows Control Panel Alignment
B: The Windows Touchscreen drivers
C: The Windows Tablet PC Settings Calibrate option
,D: The ELO TouchSystem Alignment program - ANSWER-C
D
What does omni directional operation of the Barcode Scanner
provide?
A: Ability to write as well as read barcodes.
B: Ability to scan in either a forward or backward direction.
C: Ability to scan both 1D and 2D barcodes.
D: An ergonomic handle that can be positioned on either side. -
ANSWER-C
What should a customer do before installing devices to the
powered USB ports
on the rear of the HP Retail
Expansion Dock?
A: Test the powered USB device on another system to
ensure it is working
correctly.
B: Make sure the power cord from the expansion dock is
disconnected from the
wall
socket.
, C: Unplug all other devices and then replug the device.
D: Power off the system, connect the device, and then power
on the system. -
ANSWER-
D
How can you verify a successful installation of the HP MSR in
USB-HID mode?
A: Launch the MSR OPOS Test utility and then select the
MSR model.
B: Open Microsoft Notepad and swipe a credit card.
C: Open the MSR drivers from Windows control panel.
D: Check the MSR's LED status after installation and power on.
- ANSWER-B
What should you do to isolate and resolve an issue with the
HP POS thermal
receipt printer? (Select
three.)
A: Reset the printer.
B: Run the printer tests.
ACTUAL COMPLETE FREQUENTLY MOST TESTED REAL
EXAM QUESTIONS AND VERIFIED SOLUTIONS | GET IT
100% ACCURATE!! ALREADY GRADED A+ | NEWEST
EXAM | JUST RELEASED!!
What does a Red LED on the HP Wireless Barcode Scanner
Base mean?
A: The Barcode Scanner is on and ready to re-scan.
B: A conversion or format error has occurred.
C: The scanner battery is charging.
D: The barcode was successfully decoded. - ANSWER-C
What is used for HP POS Touchscreen alignment or calibration
depending on
the monitor model and operating system?
(Select two)
A: The Windows Control Panel Alignment
B: The Windows Touchscreen drivers
C: The Windows Tablet PC Settings Calibrate option
,D: The ELO TouchSystem Alignment program - ANSWER-C
D
What does omni directional operation of the Barcode Scanner
provide?
A: Ability to write as well as read barcodes.
B: Ability to scan in either a forward or backward direction.
C: Ability to scan both 1D and 2D barcodes.
D: An ergonomic handle that can be positioned on either side. -
ANSWER-C
What should a customer do before installing devices to the
powered USB ports
on the rear of the HP Retail
Expansion Dock?
A: Test the powered USB device on another system to
ensure it is working
correctly.
B: Make sure the power cord from the expansion dock is
disconnected from the
wall
socket.
, C: Unplug all other devices and then replug the device.
D: Power off the system, connect the device, and then power
on the system. -
ANSWER-
D
How can you verify a successful installation of the HP MSR in
USB-HID mode?
A: Launch the MSR OPOS Test utility and then select the
MSR model.
B: Open Microsoft Notepad and swipe a credit card.
C: Open the MSR drivers from Windows control panel.
D: Check the MSR's LED status after installation and power on.
- ANSWER-B
What should you do to isolate and resolve an issue with the
HP POS thermal
receipt printer? (Select
three.)
A: Reset the printer.
B: Run the printer tests.
