MA 2A HOISTING EXAM TEST QUESTIONS WITH ACCURATE SOLUTIONS
What is the purpose of the 520:C.M.R.6:00
To establish rules and regulations for safety of the public
What regulatory authority governs hoisting machinery
520-C.M.R. 6:00 MGL chapter 146 section 53-54A
What type of system is used when working on de-energized circuit
Lock out tag out
In event of death, department of public safety must how soon
Within 1 hour of incident
When are reports of injury that required hospitalization or medical treatment sent to the
engineering section of department of public safety
Immediately After the person has been treated
All welding and cutting on hoisting equipment must be done in accordance with
requirements of what
American society of mechanical engineering (ASME)
,What items should be checked on daily inspection
Wire ropes, bearings, gears, friction clutches, brakes, chain drives and anything subject to
wear
What type of protection should be given to the operator of material handling and moving
equipment
Protection from weather, heat in winter, safety glasses, hard hat, roll over protective system
What equipment requires hoisting license
Height of lift exceed 10' or weight of load exceed 500 lbs or the capacity of the bucket is
more than 1/4 cubic yard
When do you need a gas test
Anytime you smell gas or think you hit a gas line
When driving a four wheel backhoe up a steep hill what should be done
Fill front bucket with dirt
Where is the operators manual found
In the machine
, What is the average hydraulic pressure of a lul
1,800 lbs psi to 2,400 lbs psi
What is the total force exerted on a 4" cylinder at 1,800 psi
4x3.14=12.56 x 1,800 = 22,608 lbs of force
Where should the approved hand signals be posted
On the machine
What is the weakest part of a hydraulic system
Hoses
What causes starving of hydraulic system
Low fluid, dirty filter, leaks, linked hoses
Who has the right of way when operating equipment
Pedestrian
Lost some reasons why you would replace a hose
Broken, cracked, chafed, bulging or leaking
What is the purpose of the 520:C.M.R.6:00
To establish rules and regulations for safety of the public
What regulatory authority governs hoisting machinery
520-C.M.R. 6:00 MGL chapter 146 section 53-54A
What type of system is used when working on de-energized circuit
Lock out tag out
In event of death, department of public safety must how soon
Within 1 hour of incident
When are reports of injury that required hospitalization or medical treatment sent to the
engineering section of department of public safety
Immediately After the person has been treated
All welding and cutting on hoisting equipment must be done in accordance with
requirements of what
American society of mechanical engineering (ASME)
,What items should be checked on daily inspection
Wire ropes, bearings, gears, friction clutches, brakes, chain drives and anything subject to
wear
What type of protection should be given to the operator of material handling and moving
equipment
Protection from weather, heat in winter, safety glasses, hard hat, roll over protective system
What equipment requires hoisting license
Height of lift exceed 10' or weight of load exceed 500 lbs or the capacity of the bucket is
more than 1/4 cubic yard
When do you need a gas test
Anytime you smell gas or think you hit a gas line
When driving a four wheel backhoe up a steep hill what should be done
Fill front bucket with dirt
Where is the operators manual found
In the machine
, What is the average hydraulic pressure of a lul
1,800 lbs psi to 2,400 lbs psi
What is the total force exerted on a 4" cylinder at 1,800 psi
4x3.14=12.56 x 1,800 = 22,608 lbs of force
Where should the approved hand signals be posted
On the machine
What is the weakest part of a hydraulic system
Hoses
What causes starving of hydraulic system
Low fluid, dirty filter, leaks, linked hoses
Who has the right of way when operating equipment
Pedestrian
Lost some reasons why you would replace a hose
Broken, cracked, chafed, bulging or leaking
