ACTUAL EXAM | QUESTION AND ANSWERS PLUS
RATIONALES | ALREADY GRADED A+ | LATEST EXAM
1. According to the IICRC S500, which category of water originates from a
sanitary source and poses no substantial health risk?
A. Category 1
B. Category 2
C. Category 3
D. Black water
Answer: A. Category 1
Rationale: Category 1 water comes from a sanitary source and does not pose a
substantial health risk if exposure is limited.
2. Which category of water contains significant contamination and has the
potential to cause discomfort or sickness?
A. Category 1
B. Category 2
C. Category 3
D. Clean water
Answer: B. Category 2
Rationale: Category 2 water contains chemical, biological, or physical
contaminants that may cause illness or discomfort.
3. Water from sewage backflows and rising floodwaters is classified as:
A. Category 1
B. Category 2
C. Category 3
D. Category 4
Answer: C. Category 3
Rationale: Category 3 water is grossly contaminated and includes sewage and
floodwaters.
,4. Which class of water loss involves the least amount of water absorption?
A. Class 1
B. Class 2
C. Class 3
D. Class 4
Answer: A. Class 1
Rationale: Class 1 losses affect only part of a room and involve minimal
moisture absorption.
5. A water loss affecting an entire room with absorption into structural
materials is classified as:
A. Class 1
B. Class 2
C. Class 3
D. Class 4
Answer: B. Class 2
Rationale: Class 2 losses involve absorption into structural materials such as
carpet and padding.
6. Which class of water loss typically involves ceilings, walls, insulation, and
subfloors?
A. Class 1
B. Class 2
C. Class 3
D. Class 4
Answer: C. Class 3
Rationale: Class 3 losses involve overhead water sources saturating ceilings,
walls, and insulation.
7. A loss involving deeply held moisture in low-porosity materials is
classified as:
,A. Class 1
B. Class 2
C. Class 3
D. Class 4
Answer: D. Class 4
Rationale: Class 4 losses involve specialty drying situations with low-
permeance materials.
8. Which psychrometric term refers to the amount of moisture in the air
compared to the maximum it can hold?
A. Vapor pressure
B. Specific humidity
C. Relative humidity
D. Grain depression
Answer: C. Relative humidity
Rationale: Relative humidity compares actual moisture content to maximum
capacity at a given temperature.
9. One pound of water equals how many grains?
A. 500 grains
B. 700 grains
C. 1,000 grains
D. 7,000 grains
Answer: D. 7,000 grains
Rationale: One pound of water is equivalent to 7,000 grains.
10. Grain depression is best described as:
A. Moisture content of materials
B. Difference in grains between two air samples
C. Temperature change during evaporation
D. Air movement rate
Answer: B. Difference in grains between two air samples
Rationale: Grain depression measures the difference in moisture content
between affected and unaffected air.
, 11. Which instrument is used to measure temperature and relative
humidity?
A. Manometer
B. Hygrometer
C. Moisture meter
D. Thermo-anemometer
Answer: B. Hygrometer
Rationale: Hygrometers measure temperature and relative humidity.
12. Which type of moisture meter measures moisture without penetrating
the surface?
A. Pin-type
B. Invasive
C. Non-penetrating
D. Resistance
Answer: C. Non-penetrating
Rationale: Non-penetrating meters use electromagnetic signals without
damaging materials.
13. Evaporation occurs faster when:
A. Relative humidity is high
B. Air movement is limited
C. Temperature is increased
D. Vapor pressure is equal
Answer: C. Temperature is increased
Rationale: Higher temperatures increase vapor pressure and accelerate
evaporation.
14. Which drying principle involves removing moisture from the air?
A. Evaporation
B. Diffusion