IFIA EXAM PACKAGE DEAL SOLVED 100% CORRECT!!

Which of the following actions represents an ethical problem for an Inspector? a) Correcting the temperature of a shore tank when the PET has been found to be inaccurate b) Changing the VCF after finding an error in the API gravity of the cargo c) Changing the temperature of the cargo in a ship'...

If the vessel incurs an in transit loss of product and an in transit gain in water, what action should be taken - Obtain samples of the free water, Check the vessel's bunkers and bunker consumption during the voyage, and verify the condition of seals on the sea suction and overboard discharge val...

As density of a material increases API - Lowers Relative density is the ratio of the density of a substance at a specified temperature to the density of what other substance - Pure water at specified temperature What data must be available to calculate a floating roof correction - Observed API gr...

As the density of a material increases, what happens to the API Gravity? a) It becomes higher b) It becomes lower c) It does not change d) Answers a., b. and c. are all wrong - b) It becomes lower Density of any substance is the ratio of its mass to its volume, usually at a specified temperatur...

What is commonly meant by the term 'dip'? a. Ullage b. Innage c. Free water measurement d. Swing gauge - B What occurs when a shore tank is filled to a level in the 'critical zone'? a. The flexing bottom of a tank is at its highest point b. The tank will overflow if more liquid is added ...

As the density of a material increases, what happens to the API Gravity? a. It becomes higher b. It becomes lower c. It does not change d. Answers a., b. and c. are all wrong - B Density of any substance is the ratio of its mass to its volume, usually at a specified temperature. Relative Den...

As the density of a material increases, what happens to the API Gravity? a. It becomes higher b. It becomes lower c. It does not change d. Answers a., b. and c. are all wrong - B Density of any substance is the ratio of its mass to its volume, usually at a specified temperature. Relative Den...

Chapter 17.3 - Which API MPMS chapter provides guidelines for identifying the source of free water? A voyage from one load port to one discharge port with one cargo - For the purposes of voyage analysis, what is a 'simple voyage'? TCV (Total Calculated Volume) - A volumetric loss is usually de...

If the vessel incurs an in transit loss of product and an in transit gain in water, what action should be taken? a. Obtain samples of the free water b. Check the vessel's bunkers and bunker consumption during the voyage c. Verify the condition of seals on the sea suction and overboard dischar...

Which API MPMS chapter provides guidelines for identifying the source of free water - Chapter 17.3 Simple voyage is - A voyage from one load port to one discharge port with one cargo Volumetric loss is usually determined by comparing the discharge port outturn quantity to the load port Bill of L...

API Gravity scale indicates - Density Hydrometer measures - Density Ballast is - Water that allows the vessel to maintain stability A permanent ballast tank is - A tank designated to only contain ballast S & W stands for - Sediment and water Deadwood is - Any tank fitting or structural member i...