Lote
Automotive Service Excellence(ASE) certification Bundle Set
Automotive Service Excellence(ASE) certification Bundle Set
[Mostrar más]Automotive Service Excellence(ASE) certification Bundle Set
[Mostrar más]The air pressure at the inlet of the HVLP gun is normally between: 
A.10-30 psi 
B.30-50 psi 
C.50-70 psi 
D. none of the above - Answer B:30-50 psi 
 
Painter A says that primer-surfacer will dry faster if sprayed in several coats with flash time between coats. Painter B says there would be less...
Vista previa 3 fuera de 21 páginas
Añadir al carritoThe air pressure at the inlet of the HVLP gun is normally between: 
A.10-30 psi 
B.30-50 psi 
C.50-70 psi 
D. none of the above - Answer B:30-50 psi 
 
Painter A says that primer-surfacer will dry faster if sprayed in several coats with flash time between coats. Painter B says there would be less...
Both b and c - Answer Coolant should be tested for ________. 
 
Proper color 
Freezing point (temperature) 
Specific Gravity 
Both b and c 
 
Both technician a and b - Answer Two technicians are discussing a compression test. Technician A says that the engine should be cranked over with the pres...
Vista previa 3 fuera de 18 páginas
Añadir al carritoBoth b and c - Answer Coolant should be tested for ________. 
 
Proper color 
Freezing point (temperature) 
Specific Gravity 
Both b and c 
 
Both technician a and b - Answer Two technicians are discussing a compression test. Technician A says that the engine should be cranked over with the pres...
Spark plugs are being replaced on a v6 engine. Which of the following should be performed before removing the boot? - Answer Twist the boot 1/2 a turn 
 
Technician A days that a positive crankcase ventilation (pvc) system reduces vehicle emissions. Tech B says that a pvc system helps increase cra...
Vista previa 1 fuera de 4 páginas
Añadir al carritoSpark plugs are being replaced on a v6 engine. Which of the following should be performed before removing the boot? - Answer Twist the boot 1/2 a turn 
 
Technician A days that a positive crankcase ventilation (pvc) system reduces vehicle emissions. Tech B says that a pvc system helps increase cra...
an engine miss is being diagnosed using a cylinder leakage test. 
Technician A says that any cylinder with over 20% leakage has excessive leakage. Tech B says that air leaking from the tailpipe indicates a cracked cylinder. 
 
A only, 
B only, 
 A & B, 
Neither . - Answer A only: 
 
If cylinder l...
Vista previa 4 fuera de 82 páginas
Añadir al carritoan engine miss is being diagnosed using a cylinder leakage test. 
Technician A says that any cylinder with over 20% leakage has excessive leakage. Tech B says that air leaking from the tailpipe indicates a cracked cylinder. 
 
A only, 
B only, 
 A & B, 
Neither . - Answer A only: 
 
If cylinder l...
Three phases of aircraft ASE - Answer Avoiding detection 
Avoiding the engagement 
Surviving the engagement 
 
What is the best form of ASE on the aircraft? - Answer The aviator 
 
What is the primary means of avoiding the engagement? - Answer Reducing the aircraft's heat signature 
 
What ar...
Vista previa 1 fuera de 4 páginas
Añadir al carritoThree phases of aircraft ASE - Answer Avoiding detection 
Avoiding the engagement 
Surviving the engagement 
 
What is the best form of ASE on the aircraft? - Answer The aviator 
 
What is the primary means of avoiding the engagement? - Answer Reducing the aircraft's heat signature 
 
What ar...
Technician A says that when pressure testing a radiator cap, a special adapter is needed. Technician B says the best way to check thermostat operation is while it is in the engine. Who is right? - Answer Tech A 
 
A technician is checking resistance in an engine's spark plug wires using an ohmmet...
Vista previa 2 fuera de 11 páginas
Añadir al carritoTechnician A says that when pressure testing a radiator cap, a special adapter is needed. Technician B says the best way to check thermostat operation is while it is in the engine. Who is right? - Answer Tech A 
 
A technician is checking resistance in an engine's spark plug wires using an ohmmet...
True or False. Chlorine was found to do damage to the ozone layer? - Answer True 
 
True or False. Different refrigerant are ok to be mixed together. Pressure characteristics are a little bit different but should not matter. - Answer False. High pressure characteristics between R12 and R134a var...
Vista previa 2 fuera de 5 páginas
Añadir al carritoTrue or False. Chlorine was found to do damage to the ozone layer? - Answer True 
 
True or False. Different refrigerant are ok to be mixed together. Pressure characteristics are a little bit different but should not matter. - Answer False. High pressure characteristics between R12 and R134a var...
A - Answer A drum is chattering on the brake lathe. This could be the result of: 
A. Failure to install the dampening belt. 
B. Cutting too slowly. 
C. Dull cutting blades. 
D. Cutting speed too fast. 
 
C - Answer A vehicle is equipped with a hydro-boost brake system has a hard pedal with litt...
Vista previa 2 fuera de 11 páginas
Añadir al carritoA - Answer A drum is chattering on the brake lathe. This could be the result of: 
A. Failure to install the dampening belt. 
B. Cutting too slowly. 
C. Dull cutting blades. 
D. Cutting speed too fast. 
 
C - Answer A vehicle is equipped with a hydro-boost brake system has a hard pedal with litt...
How would you adjust a rack yoke bearing? - Answer Tighten, then look at OEM specifications and back off by the suggested amount of degrees. 
 
If a customer states that their steering wheel turns more to the left than to the right, what are some of the most likely causes? - Answer - Incorrectly...
Vista previa 2 fuera de 5 páginas
Añadir al carritoHow would you adjust a rack yoke bearing? - Answer Tighten, then look at OEM specifications and back off by the suggested amount of degrees. 
 
If a customer states that their steering wheel turns more to the left than to the right, what are some of the most likely causes? - Answer - Incorrectly...
1. On a car with disc/drum brakes, the front brakes grab 
quickly when light pedal pressure is applied. This problem 
could be caused by a bad: 
A. proportioning valve 
B. pressure safety switch 
C. metering valve 
D. residual check valve - Answer 1. The correct answer is C. The metering valve del...
Vista previa 4 fuera de 51 páginas
Añadir al carrito1. On a car with disc/drum brakes, the front brakes grab 
quickly when light pedal pressure is applied. This problem 
could be caused by a bad: 
A. proportioning valve 
B. pressure safety switch 
C. metering valve 
D. residual check valve - Answer 1. The correct answer is C. The metering valve del...
A spongy brake pedal may be caused by: 
a. ABS Diagnostic Trouble Code set 
b. Frozen caliper piston 
c. Defective metering valve. 
d. Air in hydraulic system - Answer D 
 
This question is not like the others. It has the word EXCEPT. For this question, look for the choice that could NOT cause th...
Vista previa 2 fuera de 8 páginas
Añadir al carritoA spongy brake pedal may be caused by: 
a. ABS Diagnostic Trouble Code set 
b. Frozen caliper piston 
c. Defective metering valve. 
d. Air in hydraulic system - Answer D 
 
This question is not like the others. It has the word EXCEPT. For this question, look for the choice that could NOT cause th...
2. A driver says that the front end of his car vibrates up and down while traveling at most road speeds. Tech A says that too much runout of the front wheels could be the cause. Tech B says that a static out of balance of the front wheels could be the cause. Who is right? 
A. Tech A only 
B. Tech B ...
Vista previa 3 fuera de 30 páginas
Añadir al carrito2. A driver says that the front end of his car vibrates up and down while traveling at most road speeds. Tech A says that too much runout of the front wheels could be the cause. Tech B says that a static out of balance of the front wheels could be the cause. Who is right? 
A. Tech A only 
B. Tech B ...
Which of following is not a common side effect associated with the use of steriods? - Answer sleeplessness 
 
Which of the following is not a motivation behind taking performance- enhancing drugs? - Answer Losing weight due to decreased appetite 
 
What is the most important thing to do before s...
Vista previa 2 fuera de 5 páginas
Añadir al carritoWhich of following is not a common side effect associated with the use of steriods? - Answer sleeplessness 
 
Which of the following is not a motivation behind taking performance- enhancing drugs? - Answer Losing weight due to decreased appetite 
 
What is the most important thing to do before s...
Technician B says that Part 'X' is used to correct installed spring height. Who is right? - Answer B. Technician B only 
 
A compression test shows that one cylinder is too low. A leakage test on that cylinder shows that there is excessive leakage. During the test, air could be heard coming from...
Vista previa 2 fuera de 6 páginas
Añadir al carritoTechnician B says that Part 'X' is used to correct installed spring height. Who is right? - Answer B. Technician B only 
 
A compression test shows that one cylinder is too low. A leakage test on that cylinder shows that there is excessive leakage. During the test, air could be heard coming from...
How is voltage drop measure? 
 
A. Across a component with it operating 
B. Across a component with it not operating 
C. Both 
D. Neither - Answer A 
 
When measuring voltage drop what does it depend on 
 
A. Current 
B. Resistance 
C. Amps 
D. All the above - Answer B 
 
In a normal circu...
Vista previa 4 fuera de 34 páginas
Añadir al carritoHow is voltage drop measure? 
 
A. Across a component with it operating 
B. Across a component with it not operating 
C. Both 
D. Neither - Answer A 
 
When measuring voltage drop what does it depend on 
 
A. Current 
B. Resistance 
C. Amps 
D. All the above - Answer B 
 
In a normal circu...
3x vendido
1. The truck with the air suspension system shown above leans to the right. Technician A says that valveX could be the cause. Technician B says that valve Y 
could be the cause. Who is right? 
A. Technician A only 
B. Technician B only 
C. Both A and B 
D. Neither A or B - Answer 1. The correct an...
Vista previa 4 fuera de 34 páginas
Añadir al carrito1. The truck with the air suspension system shown above leans to the right. Technician A says that valveX could be the cause. Technician B says that valve Y 
could be the cause. Who is right? 
A. Technician A only 
B. Technician B only 
C. Both A and B 
D. Neither A or B - Answer 1. The correct an...
How many ASE emitters can be displayed on the FCR page? - Answer None 
 
Where is the AN/APR-39A (V)4 Radar Signal Detecting Set (RSDS) digital processor located in the aircraft? - Answer Left Aft Avionics Bay 
 
Which component provides Radar, Laser and Missile threat audio to the crewmembers? ...
Vista previa 2 fuera de 7 páginas
Añadir al carritoHow many ASE emitters can be displayed on the FCR page? - Answer None 
 
Where is the AN/APR-39A (V)4 Radar Signal Detecting Set (RSDS) digital processor located in the aircraft? - Answer Left Aft Avionics Bay 
 
Which component provides Radar, Laser and Missile threat audio to the crewmembers? ...
1. an engine miss is being diagnosed using a cylinder leakage test. Technician A says that any cylinder with over 20% leakage has excessive leakage. Tech B says that air leaking from the tailpipe indicates a cracked cylinder. 
 
A only 
B only 
Both A & B 
Neither A nor B - Answer A only 
 
If cyl...
Vista previa 2 fuera de 12 páginas
Añadir al carrito1. an engine miss is being diagnosed using a cylinder leakage test. Technician A says that any cylinder with over 20% leakage has excessive leakage. Tech B says that air leaking from the tailpipe indicates a cracked cylinder. 
 
A only 
B only 
Both A & B 
Neither A nor B - Answer A only 
 
If cyl...
What is the purpose of a brake band? - Answer It stops and holds the drum that is connected to a member of the planetary gearset. 
 
What are brake bands made out of? - Answer Brake bands are flexible steel plates lined with friction material. That material can be organic or semi-metallic. 
 
What...
Vista previa 2 fuera de 5 páginas
Añadir al carritoWhat is the purpose of a brake band? - Answer It stops and holds the drum that is connected to a member of the planetary gearset. 
 
What are brake bands made out of? - Answer Brake bands are flexible steel plates lined with friction material. That material can be organic or semi-metallic. 
 
What...
If an engine experiences a sharp, metallic rapping noise only when it is idling, the trouble could be worn: 
 
`Main bearings 
`Piston pins 
`connecting rod bearings 
`piston skirts - Answer Piston pins 
 
On a port fuel-injected engine, the cause of excessive black smoke in the exhaust could be:...
Vista previa 2 fuera de 12 páginas
Añadir al carritoIf an engine experiences a sharp, metallic rapping noise only when it is idling, the trouble could be worn: 
 
`Main bearings 
`Piston pins 
`connecting rod bearings 
`piston skirts - Answer Piston pins 
 
On a port fuel-injected engine, the cause of excessive black smoke in the exhaust could be:...
A5 Question 1 
 
The brake pedal is low and spongy; all brake adjustments have been completed according to specifications. The cause of the problem could be: 
 
A) Binding pedal linkage. 
 
B)Dented brake line. 
 
C)Plugged compensating port. 
 
D)A weak hydraulic hose. - Answer Answer D is cor...
Vista previa 2 fuera de 11 páginas
Añadir al carritoA5 Question 1 
 
The brake pedal is low and spongy; all brake adjustments have been completed according to specifications. The cause of the problem could be: 
 
A) Binding pedal linkage. 
 
B)Dented brake line. 
 
C)Plugged compensating port. 
 
D)A weak hydraulic hose. - Answer Answer D is cor...
Technician A says a pilot bearing is a bushing that supports the forward end of the transmission input shaft. Technician B says a pilot bearing is a bushing that reduces friction between the clutch fork and pressure plate. Who is right? - Answer A only. 
 
Technician A says the clutch disc is bolt...
Vista previa 3 fuera de 19 páginas
Añadir al carritoTechnician A says a pilot bearing is a bushing that supports the forward end of the transmission input shaft. Technician B says a pilot bearing is a bushing that reduces friction between the clutch fork and pressure plate. Who is right? - Answer A only. 
 
Technician A says the clutch disc is bolt...
Compradores de Stuvia evaluaron más de 700.000 resúmenes. Así estas seguro que compras los mejores documentos!
Puedes pagar rápidamente y en una vez con iDeal, tarjeta de crédito o con tu crédito de Stuvia. Sin tener que hacerte miembro.
Tus compañeros escriben los resúmenes. Por eso tienes la seguridad que tienes un resumen actual y confiable. Así llegas a la conclusión rapidamente!
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Nuestra garantía de satisfacción le asegura que siempre encontrará un documento de estudio a tu medida. Tu rellenas un formulario y nuestro equipo de atención al cliente se encarga del resto.
Stuvia is a marketplace, so you are not buying this document from us, but from seller cracker. Stuvia facilitates payment to the seller.
No, you only buy this summary for $41.49. You're not tied to anything after your purchase.
4.6 stars on Google & Trustpilot (+1000 reviews)
45,681 summaries were sold in the last 30 days
Founded in 2010, the go-to place to buy summaries for 14 years now