ANSI/AISC 358-16
ANSI/AISC 358s1-18
ANSI/AISC 358s2-20
An American National Standard
Prequalified
Connections
for Special and Intermediate
Steel Moment Frames for
Seismic Applications, including
Supplements No. 1 and No. 2
May 12, 2016
(includes 2018 and 2020 supplements)
Approved by the Connection Prequalification Review Panel
,
,ANSI/AISC 358-16
ANSI/AISC 358s1-18
ANSI/AISC 358s2-20
An American National Standard
Prequalified
Connections
for Special and Intermediate
Steel Moment Frames for
Seismic Applications, including
Supplements No. 1 and No. 2
May 12, 2016
(includes 2018 and 2020 supplements)
Approved by the Connection Prequalification Review Panel
, 9.2-ii
AISC © 2020
by
American Institute of Steel Construction
All rights reserved. This book or any part thereof must not be
reproduced in any form without the written permission of the publisher.
The AISC logo is a registered trademark of AISC.
The information presented in this publication has been prepared by a balanced committee
following American National Standards Institute (ANSI) consensus procedures and
recognized principles of design and construction. While it is believed to be accurate, this
information should not be used or relied upon for any specific application without compe-
tent professional examination and verification of its accuracy, suitability and applicability by
a licensed engineer or architect. The publication of this information is not a representation
or warranty on the part of the American Institute of Steel Construction, its officers, agents,
employees or committee members, or of any other person named herein, that this informa-
tion is suitable for any general or particular use, or of freedom from infringement of any
patent or patents. All representations or warranties, express or implied, other than as stated
above, are specifically disclaimed. Anyone making use of the information presented in this
publication assumes all liability arising from such use.
Caution must be exercised when relying upon standards and guidelines developed by
other bodies and incorporated by reference herein since such material may be modified or
amended from time to time subsequent to the printing of this edition. The American Institute
of Steel Construction bears no responsibility for such material other than to refer to it and
incorporate it by reference at the time of the initial publication of this edition.
Printed in the United States of America
Prequalified Connections for Special and Intermediate Steel Moment Frames
for Seismic Applications, 2016, incl. Supplements No. 1 and No. 2
American Institute of Steel Construction
ANSI/AISC 358s1-18
ANSI/AISC 358s2-20
An American National Standard
Prequalified
Connections
for Special and Intermediate
Steel Moment Frames for
Seismic Applications, including
Supplements No. 1 and No. 2
May 12, 2016
(includes 2018 and 2020 supplements)
Approved by the Connection Prequalification Review Panel
,
,ANSI/AISC 358-16
ANSI/AISC 358s1-18
ANSI/AISC 358s2-20
An American National Standard
Prequalified
Connections
for Special and Intermediate
Steel Moment Frames for
Seismic Applications, including
Supplements No. 1 and No. 2
May 12, 2016
(includes 2018 and 2020 supplements)
Approved by the Connection Prequalification Review Panel
, 9.2-ii
AISC © 2020
by
American Institute of Steel Construction
All rights reserved. This book or any part thereof must not be
reproduced in any form without the written permission of the publisher.
The AISC logo is a registered trademark of AISC.
The information presented in this publication has been prepared by a balanced committee
following American National Standards Institute (ANSI) consensus procedures and
recognized principles of design and construction. While it is believed to be accurate, this
information should not be used or relied upon for any specific application without compe-
tent professional examination and verification of its accuracy, suitability and applicability by
a licensed engineer or architect. The publication of this information is not a representation
or warranty on the part of the American Institute of Steel Construction, its officers, agents,
employees or committee members, or of any other person named herein, that this informa-
tion is suitable for any general or particular use, or of freedom from infringement of any
patent or patents. All representations or warranties, express or implied, other than as stated
above, are specifically disclaimed. Anyone making use of the information presented in this
publication assumes all liability arising from such use.
Caution must be exercised when relying upon standards and guidelines developed by
other bodies and incorporated by reference herein since such material may be modified or
amended from time to time subsequent to the printing of this edition. The American Institute
of Steel Construction bears no responsibility for such material other than to refer to it and
incorporate it by reference at the time of the initial publication of this edition.
Printed in the United States of America
Prequalified Connections for Special and Intermediate Steel Moment Frames
for Seismic Applications, 2016, incl. Supplements No. 1 and No. 2
American Institute of Steel Construction
