Class 200 final Questions & Answers 100% Correct!

____________ ____________ should not be disassembled in the field - ANSWERSOil buffers Two safety precautions to be followed when first entering the elevator pit are to have the ___________ ___________ ___________open and the pit light on. - ANSWERSPit stop switch Tension on the governor rope is maintained by using a - ANSWERSTension sheave The ASME Safety Code requires oil buffers for elevators when traveling at a car speed of - ANSWERSOver 200 FPM If the pit extends more than ______ feet below the sill of the access door, a fixed vertical ladder shall be located within reach of the access door. - ANSWERS3 If using a rope fall with 4 sheaves to lift 500 lbs. how much pulling force will be required? Add 10% to the weight of the load for each sheave. - ANSWERS175 lbs. OSHA requires that slings used for hoisting be inspected at what intervals? - ANSWERSEach day before using Spring buffers are used only when the elevator travels at ___________ FPM or less. - ANSWERS200 All measurements necessary for the installation of various components in the pit are measured with reference to the - ANSWERSguide rails ASME Safety Code requires that a fully compressed oil buffer should return to its normal position within _________ seconds after the elevator car or counterweight has been removed. - ANSWERS90 Wood used to construct a hoisting support must be - ANSWERSscaffold grade What is a sign of poor quality manila rope? - ANSWERSDark colored fibers (True/False) All synthetics are impervious to sunlight. - ANSWERSFalse (True/False) Good quality manila rope has a light yellow color with a silvery or pearly luster. - ANSWERSTrue