Saturated steam Study guides, Study notes & Summaries

If the steam pressure is too low for the set temperature - Superheating can occur Wet steam can cause - Wet packs AAMI recommends that the temperature in the sterilization area be: - 68-73 degrees AAMI recommends that the humidity is the sterilization area be - 30%-60% The recommended ventilation in the sterilization are is—— air exchanges per hour under positive pressure - 10 AAMI recommends that the temperature in the sterilizer access area be —- with — ai...

Main propulsion Boiler Operation Exam Questions With Correct Answers, Latest Updated 2024/2025 (GRADED) Boiler overload capacity is normally what percentage of boiler full power capacity? - Answer 120% A pressure specified by the boiler manufacturer as a criterion for the boiler design is termed as? - Answer Design pressure What is the minimum steam drum pressure on an operating boiler? - Answer 85% of boiler operating pressure What is the minimum steam drum pressure on an operating boiler...

Z-51 Written Test Questions and Answers 100% Correct In a steam turbine, what is the function of a Kingsbury thrust bearing? A) Maintain first stage steam pressure. B) Compensate for coupling misalignment. C) Adjust shaft torque at start up. D) Maintain axial positioning of the rotor shaft. D) Maintain axial positioning of the rotor shaft. The ratio of actual pressure of water pressure in the atmosphere to the saturated pressure of given temperature is A) partial pressure. B...

Packaged watertube boilers capacities range from? a. 2300 kg to 65000 kg per hour b. 500 kg to 100 mg per hour c. 15 psi to 15000 kg per hour d. 65000 to 100000 kg per hour - A The main advantage of the packaged boiler is its a. small size b. compact design c. low cost D. quality steam - C Feild erected boilers have outputs of? A 75,000 kg/h B 100,000 kg/h C 100 mg/h D 150,000 kg/h or more - D Where electric power is used as a heating source, the boiler rating shall be ...

Z-51 Written Test Questions And Answers In a steam turbine, what is the function of a Kingsbury thrust bearing? A) Maintain first stage steam pressure. B) Compensate for coupling misalignment. C) Adjust shaft torque at start up. D) Maintain axial positioning of the rotor shaft. - ANS D) Maintain axial positioning of the rotor shaft. The ratio of actual pressure of water pressure in the atmosphere to the saturated pressure of given temperature is A) partial pressure. B) relativ...

Packaged watertube boilers capacities range from? a. 2300 kg to 65000 kg per hour b. 500 kg to 100 mg per hour c. 15 psi to 15000 kg per hour d. 65000 to 100000 kg per hour - A The main advantage of the packaged boiler is its a. small size b. compact design c. low cost D. quality steam - C Feild erected boilers have outputs of? A 75,000 kg/h B 100,000 kg/h C 100 mg/h D 150,000 kg/h or more - D Where electric power is used as a heating source, the boiler rating shall be ...

HVAC PRETEST BOMA EXAM QUESTIONS AND ANSWERS Two basic categories of chillers are the ___. a. Compression cycle and absorption b. purge and absorption c. absorption and lithium bromide d. purge and lithium bromide - ANS a. Compression cycle and absorption The five requirements for comfort are proper temperature, humidity, filtration, _____, and ventilation. a. circulation b. velocity c. . d. none of the above - ANS a. circulation The primary function of an expansion dev...

In a reciprocating feedwater pump, the _______________ A. water piston is larger than the steam piston B. water and steam piston are the same size C. steam piston is larger than the water piston D. steam valve has to be as large as the water valve correct answer: C. steam piston is larger than the water piston An ignition arch is used with a(n) ________________ stoker A. sidefeed B. spreader C. underfeed D. chain grate correct answer: D. Chain grate The try cocks on a wat...

Stationary Engineer License Exam Prep Questions And Answers 100% Solved A ______ fuse is necessary for a circuit with a load of 21,000 watts and a voltage of 220 volts. A. 100 B. 150 C. 175 D. 200 A. 100 amps. Note: V = IR Therefore I = V/R 21,000 amps /220 volts = 95 amps At 0 psig, how many BTU's are required to change 1 lb of water at 212F to steam? A. 144 B. 180 C. 970 D. 1190 C. 970 BTU Radiation is: A. the movement of liquids or gases created by a temperature difference. ...

MN Salon Manager's Test Questions And Answers Active license - ANS a current license that has not expired and is not retired. Advanced Exfoliation - ANS a cosmetic procedure removing epidermal skin cells through manual, mechanical, or chemical means. Advanced extraction - ANS an extraction performed using lancets or needles. Advertising - ANS any written or graphic representation designed to elicit enrollment or the sale of goods or services and includes signs, displa...