- Study guides, Study notes & Summaries

NIMS TEST II | QUESTIONS AND ANSWERS | 100% CORRECT 2025/2026 UPDATE!!

NIMS Exam ACTUAL QUESTIONS AND CORRECT ANSWERS The process calls for a class RC4 sliding fit for a 1.000" diameter shaft to fit into a hole. The clearance between the shaft and the hole should be what? - CORRECT ANSWER .0000 - .0012 ALSL/ SAE 4140 means steel is what? - CORRECT ANSWER Which of the following steels has the highest carbon content? A.) 8615 B.) 4140 C.) 1090 D.) 1008 - CORRECT ANSWER C) 1090 Automotive Quality If a process calls for tapping 1...

NIMS Test Exam UPDATED ACTUAL QUESTIONS AND CORRECT ANSWERS Brush - CORRECT ANSWER machine The safest way to remove chips from a lathe or milling Common injury from using a hand file - CORRECT ANSWER tang (file without handle) MSD - CORRECT ANSWER Being stabbed bu the Material Safety Data Sheet (page 707) NFPA - CORRECT ANSWER HMIS - CORRECT ANSWER Material Information System Green - CORRECT ANSWER National Fire Protection Association Hazardous Mat...

NIMS Test II Exam ACTUAL QUESTIONS AND CORRECT ANSWERS Unit of measure for lathe feed rate - CORRECT ANSWER IPR To convert inches to millimeters, a machinist would use a constant of _________. - CORRECT ANSWER 25.4 The feed rate for converting a hole on a drill press should be __________ that of drilling. - CORRECT ANSWER 2 times The feed rate for reaming a hole on a drill press should be __________ that of drilling. - CORRECT ANSWER 1/8th The most accurate ...

NIMS Turning sample test Exam ACTUAL QUESTIONS AND CORRECT ANSWERS 1) Which of the following statements best defines cutting speed: a) Cutting speed is based on RPM and is the amount a times a tool revolves in 1 second b) Cutting speed is based on the diameter of the tool and is given in surface revolutions per minute c) Cutting speed is based on the distance the work moves past the tool based on the number of feet that passes the tool in one minute and is given in surface feet per...

NIMS Turning I Sample Test Exam UPDATED ACTUAL QUESTIONS AND CORRECT ANSWERS Using the Machinery's Handbook as a reference, calculate the diameter of a hole for an RC1 clearance fit with a 2.000 inch diameter shaft: A. 2.0005 B. 1.9997 C. 2.0058 D. 1.9963 - CORRECT ANSWER A. 2.0005 Which of the following shapes cannot be held adequately by a 3-jaw universal chuck: A. Hexagon B. Rounds C. Octagon D. All of the above E. Only a and c - CORRECT ANSWER C. Octa...

NIMS Turning Between Centers and Chucking Exam ACTUAL QUESTIONS AND CORRECT ANSWERS Which of the following statements best defines cutting speed: - CORRECT ANSWER Cutting speed is based on the distance the work moves past the tool based on the number of feet that passes the tool in one minute and is given in surface feet per minute Which of the following statements best defines feed? - CORRECT ANSWER machine movement that causes a tool to cut into or along the surface o...

NIMS Practice Test1. When a CNC lathe is equipped with an automatic tool changer it is calleda______.: turning center 2. CNC mills with an ATC are called _____.: Machining Centers 3. The CNC program is created and stored in the _____.: Machine control unit 4. A(n) _____ assembly device consists of a screw and nut assembly withsteelballs in place of threads.: Ball screw 5. Most modern CNC machines employ a high-tech modernized versionof wayscalled _____.: Linear guides 6. A(n) _____ motor is...

Access NIMS ICS-300 Final Exam questions and answers with solution to master incident command system concepts. Comprehensive study guide designed to improve performance, boost understanding, and ensure success in NIMS ICS-300 final exam 2025/ 2026.

NIMS 800 FINAL PAPER 2026 EXAM Q&A STUDY GUIDE COMPLETE SOLUTIONS