ALABAMA MANUFACTURED BUILDING INSPECTOR
EXAMINATION COMPLETE QUESTIONS AND
DETAILED SOLUTIONS LATEST UPDATE THIS YEAR
JUST RELEASED
1.
During an inspection of a modular building, the inspector discovers that
a structural wall differs substantially from the approved construction
documents. What should the inspector do FIRST?
A. Approve the building because the wall appears structurally stronger
B. Require the manufacturer to demonstrate that the modification is
approved and compliant
C. Allow the contractor to verbally explain why the change was
necessary
D. Ignore the difference if the finished interior conceals the
modification
Answer: B
Rationale: An inspector should verify that construction conforms to
approved plans and applicable requirements rather than accepting
undocumented field changes based solely on appearance.
2.
Which organization serves as Alabama's state regulatory agency
responsible for enforcing manufactured building construction
standards?
,A. Alabama Department of Transportation
B. Alabama Manufactured Housing Commission
C. Alabama Firefighters Association
D. Alabama Department of Revenue
Answer: B
Rationale: The Alabama Manufactured Housing Commission regulates
the manufactured housing industry and administers the manufactured-
building program in Alabama. (
3.
A modular building arrives at a jobsite with an exterior condition
suggesting transportation damage to a structural component. What is
the inspector's most appropriate concern?
A. Whether the damage affects compliance, structural integrity, or
approved construction
B. Whether the retailer can conceal the damage with siding
C. Whether the owner prefers the damaged appearance
D. Whether interior furnishings have already been delivered
Answer: A
Rationale: Transportation damage can compromise structural
performance and must be evaluated for compliance before the building
is accepted.
4.
,Why is an approved manufacturer's installation manual particularly
important when inspecting a manufactured building installation?
A. It replaces all applicable building codes
B. It provides approved installation procedures specific to the
manufactured building
C. It determines the property's assessed tax value
D. It establishes the building's resale price
Answer: B
Rationale: Alabama rules require manufacturer's installation manuals
to be approved and certified and to address state and federal
installation requirements.)
5.
An inspector discovers that a modular unit was constructed using plans
that were never approved for that particular model. Which response is
most appropriate?
A. Approve the unit if construction appears professionally completed
B. Require documentation demonstrating approved design compliance
C. Accept the unit because the manufacturer is licensed
D. Approve it if the owner signs a waiver
Answer: B
Rationale: Manufactured buildings must be constructed according to
approved plans; licensing alone does not establish compliance of a
particular unit.
, 6.
During site inspection, the inspector notices that finished grading
directs stormwater toward the building rather than away from it. Why
is this significant?
A. It can promote settlement, moisture intrusion, and damage beneath
the structure
B. It only affects landscaping appearance
C. It automatically increases electrical demand
D. It affects only the building's interior paint
Answer: A
Rationale: Proper drainage helps prevent water accumulation,
foundation movement, moisture problems, and damage to building
components. (
7.
An inspector finds a field-installed structural beam that is not identified
on the approved drawings. What is the best inspection approach?
A. Automatically accept the beam because additional framing is always
beneficial
B. Verify engineering or approved documentation supporting the
alteration
C. Require removal without reviewing any documentation
D. Accept the beam if the contractor guarantees its strength
Answer: B
EXAMINATION COMPLETE QUESTIONS AND
DETAILED SOLUTIONS LATEST UPDATE THIS YEAR
JUST RELEASED
1.
During an inspection of a modular building, the inspector discovers that
a structural wall differs substantially from the approved construction
documents. What should the inspector do FIRST?
A. Approve the building because the wall appears structurally stronger
B. Require the manufacturer to demonstrate that the modification is
approved and compliant
C. Allow the contractor to verbally explain why the change was
necessary
D. Ignore the difference if the finished interior conceals the
modification
Answer: B
Rationale: An inspector should verify that construction conforms to
approved plans and applicable requirements rather than accepting
undocumented field changes based solely on appearance.
2.
Which organization serves as Alabama's state regulatory agency
responsible for enforcing manufactured building construction
standards?
,A. Alabama Department of Transportation
B. Alabama Manufactured Housing Commission
C. Alabama Firefighters Association
D. Alabama Department of Revenue
Answer: B
Rationale: The Alabama Manufactured Housing Commission regulates
the manufactured housing industry and administers the manufactured-
building program in Alabama. (
3.
A modular building arrives at a jobsite with an exterior condition
suggesting transportation damage to a structural component. What is
the inspector's most appropriate concern?
A. Whether the damage affects compliance, structural integrity, or
approved construction
B. Whether the retailer can conceal the damage with siding
C. Whether the owner prefers the damaged appearance
D. Whether interior furnishings have already been delivered
Answer: A
Rationale: Transportation damage can compromise structural
performance and must be evaluated for compliance before the building
is accepted.
4.
,Why is an approved manufacturer's installation manual particularly
important when inspecting a manufactured building installation?
A. It replaces all applicable building codes
B. It provides approved installation procedures specific to the
manufactured building
C. It determines the property's assessed tax value
D. It establishes the building's resale price
Answer: B
Rationale: Alabama rules require manufacturer's installation manuals
to be approved and certified and to address state and federal
installation requirements.)
5.
An inspector discovers that a modular unit was constructed using plans
that were never approved for that particular model. Which response is
most appropriate?
A. Approve the unit if construction appears professionally completed
B. Require documentation demonstrating approved design compliance
C. Accept the unit because the manufacturer is licensed
D. Approve it if the owner signs a waiver
Answer: B
Rationale: Manufactured buildings must be constructed according to
approved plans; licensing alone does not establish compliance of a
particular unit.
, 6.
During site inspection, the inspector notices that finished grading
directs stormwater toward the building rather than away from it. Why
is this significant?
A. It can promote settlement, moisture intrusion, and damage beneath
the structure
B. It only affects landscaping appearance
C. It automatically increases electrical demand
D. It affects only the building's interior paint
Answer: A
Rationale: Proper drainage helps prevent water accumulation,
foundation movement, moisture problems, and damage to building
components. (
7.
An inspector finds a field-installed structural beam that is not identified
on the approved drawings. What is the best inspection approach?
A. Automatically accept the beam because additional framing is always
beneficial
B. Verify engineering or approved documentation supporting the
alteration
C. Require removal without reviewing any documentation
D. Accept the beam if the contractor guarantees its strength
Answer: B
