2025 Texas Mold Remediation Contractor Exam
|ANSWERED |ORIGINAL | ALREADY GRADED A
Chemical-resistant goggles or face shields
Designed to protect against chemical splashes during mold remediation.
PPE training
Ensures proper selection, usage, and removal of PPE to maximize safety and
effectiveness.
Contaminated PPE storage
Should be stored in a sealed, labeled container if it cannot be disposed of immediately.
Secure, tight fit
Crucial for ensuring a respirator provides effective protection by preventing unfiltered air
from being inhaled.
Engineering controls
Refers to physical modifications such as negative air machines and HEPA filters to
reduce exposure in mold remediation.
Negative air machines and HEPA filters
Physical modifications used in engineering controls to reduce exposure.
Post-remediation clearance assessment
An evaluation conducted by a licensed mold assessment consultant to verify clearance.
Purpose of clearance sampling
, To verify that mold levels have been reduced to acceptable levels.
Components of post-remediation assessment
Visual inspection, moisture measurements, and possibly air/surface sampling.
Timing of post-remediation assessment
Should be completed after remediation is complete and before the property is
reoccupied.
Certificate of Mold Damage Remediation (CMDR)
The document provided to the client to confirm remediation success.
Types of photographic documentation
Before-and-after photographs of the remediation site.
Texas Mold Assessment and Remediation Rules (TMARR)
The set of rules under which mold remediation contractors in Texas are regulated.
Critical first step in mold remediation
Identify and correct the source of moisture.
Licensees required to maintain a physical office in Texas
Mold assessment technicians, assessment consultants, remediation contractors,
remediation companies, and mold analysis laboratories.
Minimum commercial general liability insurance required
$1,000,000 per occurrence.
Allowed exam attempts for mold remediation contractor applicant
|ANSWERED |ORIGINAL | ALREADY GRADED A
Chemical-resistant goggles or face shields
Designed to protect against chemical splashes during mold remediation.
PPE training
Ensures proper selection, usage, and removal of PPE to maximize safety and
effectiveness.
Contaminated PPE storage
Should be stored in a sealed, labeled container if it cannot be disposed of immediately.
Secure, tight fit
Crucial for ensuring a respirator provides effective protection by preventing unfiltered air
from being inhaled.
Engineering controls
Refers to physical modifications such as negative air machines and HEPA filters to
reduce exposure in mold remediation.
Negative air machines and HEPA filters
Physical modifications used in engineering controls to reduce exposure.
Post-remediation clearance assessment
An evaluation conducted by a licensed mold assessment consultant to verify clearance.
Purpose of clearance sampling
, To verify that mold levels have been reduced to acceptable levels.
Components of post-remediation assessment
Visual inspection, moisture measurements, and possibly air/surface sampling.
Timing of post-remediation assessment
Should be completed after remediation is complete and before the property is
reoccupied.
Certificate of Mold Damage Remediation (CMDR)
The document provided to the client to confirm remediation success.
Types of photographic documentation
Before-and-after photographs of the remediation site.
Texas Mold Assessment and Remediation Rules (TMARR)
The set of rules under which mold remediation contractors in Texas are regulated.
Critical first step in mold remediation
Identify and correct the source of moisture.
Licensees required to maintain a physical office in Texas
Mold assessment technicians, assessment consultants, remediation contractors,
remediation companies, and mold analysis laboratories.
Minimum commercial general liability insurance required
$1,000,000 per occurrence.
Allowed exam attempts for mold remediation contractor applicant
