ATSSA Traffic Control Supervisor Re certification UPDATED ACTUAL Exam Questions and CORRECT Answers

ATSSA Traffic Control Supervisor Re-
certification UPDATED ACTUAL Exam
Questions and CORRECT Answers
L=(WS²)/60 for 40MPH or less,

L=WS for 45MPH or more - CORRECT ANSWER - Formula for Min. taper length


The off peak 85th percentile. Which is the speed at or below which 85% of vehicles travel
operating speed in free flow conditions - CORRECT ANSWER - speed used in formulas
should be


125' - CORRECT ANSWER - Distance of L for 25 MPH with 12' Lane width



245' - CORRECT ANSWER - Distance of L for 35 MPH with 12' Lane width



540' - CORRECT ANSWER - Distance of L for 45 MPH with 12' Lane width



660' - CORRECT ANSWER - Distance of L for 55 MPH with 12' Lane width



780' - CORRECT ANSWER - Distance of L for 65 MPH 12' Lane width



L Minimum - CORRECT ANSWER - Merging Taper Length



1/2 L Minimum - CORRECT ANSWER - Shifting Taper Length



1/3 L Minimum - CORRECT ANSWER - Shoulder Taper Length


50'-100' regardless of speed

, 6 devices 10'-20' apart - CORRECT ANSWER - One-Lane, Two-Way Taper (Flagger taper)
Length and number of devices


50'-100' per lane - CORRECT ANSWER - Downstream taper Length



2L - CORRECT ANSWER - Tangent distance (between tapers)



1/2L - CORRECT ANSWER - Tangent distance before shifting taper


Buffer Space
Work Space

Traffic Space - CORRECT ANSWER - Activity Area Sub-components (3)


Recovery Area for errant vehicles: Forgiving design
Protects workers and Motorists
Always completely empty or clear
No vehicles, truck-mounted attenuator, equipment, or materials
STRONGLY RECOMMENDED: unless there is a documented reason not to - CORRECT
ANSWER - Longitudinal Buffer Space


Where road users are returned to their normal path
extends from the downstream end of the work area to the last device such as end work zone sign
May contain:
end work zone sign: usually 500' past last device

downstream taper = 50'-100' per lane - CORRECT ANSWER - Termination Area is:


can contain: (2)