Study online at https://quizlet.com/_h7rpav
1. Which of the following is most typical of a broad- Multiple analog channels
band network?
2. What components are common to all computer Processor
systems? (Check all that apply.) Memory
Storage
I/O
3. What does I/O stand for? Input / Output
4. A NIC is a device used for: Signaling
5. A sound card is what general type of computer Input/output
component?
6. Which of the following is managed by the OS? Keyboard input
Screen display
File I/O
Peripheral control
7. The primary purpose of a device driver is to con- True
trol hardware under the supervision of the OS.
True or False?
8. Which of the following network topologies forms Ring topology
a closed loop?
9. Which of the following network topologies con- Bus topology
nects devices to a shared straight-line cable?
10. M1L5 When is UTP cable preferred over STP? When there is little electrical in-
terference
11. BNC
, Progression: Field Tech IV - V Conventional
Study online at https://quizlet.com/_h7rpav
Which connector type is used with Thinnet coaxial
cable?
12. Which of the following cable types uses a T-con- Thinnet
nector to connect each NIC to the cable?
13. Which of the following cable types can transmit Fiber optic
data farthest?
14. How are bits represented on fiber optic cable? Pulses (on/off) of light
15. Which of the following are the two primary types Laser diode and LED
of light sources in fiber optic cables?
16. What is the main advantage of star topology? Ease of management
17. Which of the following would not be used in a Thinnet
typical star topology?
18. How many wire pairs can be terminated on a 66 25 or 50
block?
19. What makes a crossover cable different from a A crossover cable uses the 568A
patch cord? pattern on one jack, and the
568B pattern on the other. A
patch cord uses the same pinout
pattern on both jacks.
20. What is the key reason that smart LAN adminis- Bad cable connections degrade a
trators demand well-made cable connections? network's performance.
21. What is the main advantage of using balanced The cable can be longer because
signaling on a serial cable? balanced signaling is less vulner-
able to interference.
, Progression: Field Tech IV - V Conventional
Study online at https://quizlet.com/_h7rpav
22. What term describes the number of wave crests Frequency
that pass a fixed point during a particular period
of time?
23. In data networking, this term is defined as "Sig- Half-duplex
nals may flow in either direction, but not simulta-
neously".
24. Two CPUs have the same size data bus. Which one The one with a higher clock
will process data faster? speed
25. This unique ID number is coordinated by the In- Media access control address
stitute of Electrical and Electronics Engineers and (MAC)
is used by only one network interface card any-
where in the world.
26. Which is a network management and utility soft- Backup and recovery utilities
ware that is typically used by network adminis-
trators and information systems personnel when
the network is unused or lightly used, often in the
middle of the night?
27. Which of the following is also called "Thicknet" 10Base5 cable
or "yellow wire" and includes two layers of foil
shielding as well as an additional copper mesh
shield?
28. According to 10BaseT wiring rules, what is the 100m
maximum segment length without a repeater?
29. When light travels through a fiber-optic cable, the The boundary between the core
change in refractive index causes the light to re- and the cladding
fract off which of the following?