HP EXAM
A customer needs Layer 2 switches that provide basic functionality. In the future, this
customer might need to use the switches' CLI to configure VLAN and STP features.
Which category of the switches does meet the customer's needs? - Correct Answer
✔✔ - managed
You are designing a server solution that requires a significant amount of memory.
Which guideline should you keep in mind when working with memory channels? -
Correct Answer ✔✔ - To maximize performance, balance the total memory capacity
across all installed processors, and load the channels similarly
QUESTION NO: 4
A customer needs to know if the storage solution you proposed contains components
that are compatible with existing products currently in the data center.
Which HPE resource should you use to provide this information? - Correct Answer ✔✔
- Single Point of Connectivity Knowledge (SPOCK)
QUESTION NO: 5
You are troubleshooting a HPE ProLiant Gen 9 server and need to find a consolidated
view of all the system health and configuration information in a single web interface.
IT Certification Guaranteed, The Easy Way!
Which HPE tool should you use? - Correct Answer ✔✔ - System Management
Homepage
QUESTION NO: 6
A customer is considering an upgrade of their network, which connects 10 servers. The
customer has a converged data center networking architecture with Layer 2 and Layer 3
functionality.
Which HPE product family will meet this customer's needs? - Correct Answer ✔✔ -
FlexFabric
QUESTION NO: 7
A customer needs to enable HPE Proactive Care and automated case creation for
server hardware failures in their OneView environment.
Which step do you need to complete in OneView to accomplish these tasks? - Correct
Answer ✔✔ - Enable remote support from the Settings page.
QUESTION NO: 8
You are designing a solution to run a Citrix XenDesktop workload.
Which HPE planning and designing resource contains a detailed example of this type of
solution, including a list of all the hardware and software components? - Correct
Answer ✔✔ - Reference Architecture
, QUESTION NO: 9
You are troubleshooting a HPE ProLiant rack-mount server. All installed server fans
constantly run at 100%.
Which action should you take first? - Correct Answer ✔✔ - Reseat drive blanks
QUESTION NO: 10
You need to install 10 HPE ProLiant servers in an environment without DHCP. Which
tool can you use to set up remote management? - Correct Answer ✔✔ - Intelligent
Management Center
QUESTION NO: 11
A customer needs to create a large RAID set for archive storage on large-capacity
drives. Which RAID level is recommended for this customer? - Correct Answer ✔✔ -
RAID 6
QUESTION NO: 12
ou are designing a system for a customer that runs an OLTP application. The customer
has SAN based storage.
They need to accelerate application performance.
Which HPE ProLiant Gen10 feature set will address this customer's needs? - Correct
Answer ✔✔ - intelligent system tuning
QUESTION NO: 13
A customer is building out their rack of servers and storage systems. They need a high-
performance network with a simple centralized management capability and deep buffer
support for iSCSI. They expect high growth in their virtualization environment.
Which solution will best meet the customer's needs? - Correct Answer ✔✔ - FlexFabric
QUESTION NO: 14
A customer needs to centralize their backup environment for their branch office They
plan to use HPE StoreOnce with catalyst What should they implement within their
backups software to minimize the network load on the remote site? - Correct Answer
✔✔ - source-side deduplication
QUESTION NO: 16
A customer needs to connect two switches without VLANs or Spanning Tree. To which
mode should the switches be set? - Correct Answer ✔✔ - Gateway Mode
QUESTION NO: 17
You have completed a non-disruptive activation of firmware on an SN6000 switch.
Which session must be restarted manually? - Correct Answer ✔✔ - telnet session
QUESTION NO: 18
You are installing a combined server and storage solution at a customer location. What
must you keep in mind regarding the typical requirements for the location? (Choose
two.) - Correct Answer ✔✔ - A. Room temperature must not exceed 35 °C (95 °F)
D. There must be at least a 10 cm (4 in) clearance space at the front and back of the
components within the racks
QUESTION NO: 19
A customer wants to safeguard their server firmware and asks you about the HPE
ProLiant Gen10 features that provide this level of security.
A customer needs Layer 2 switches that provide basic functionality. In the future, this
customer might need to use the switches' CLI to configure VLAN and STP features.
Which category of the switches does meet the customer's needs? - Correct Answer
✔✔ - managed
You are designing a server solution that requires a significant amount of memory.
Which guideline should you keep in mind when working with memory channels? -
Correct Answer ✔✔ - To maximize performance, balance the total memory capacity
across all installed processors, and load the channels similarly
QUESTION NO: 4
A customer needs to know if the storage solution you proposed contains components
that are compatible with existing products currently in the data center.
Which HPE resource should you use to provide this information? - Correct Answer ✔✔
- Single Point of Connectivity Knowledge (SPOCK)
QUESTION NO: 5
You are troubleshooting a HPE ProLiant Gen 9 server and need to find a consolidated
view of all the system health and configuration information in a single web interface.
IT Certification Guaranteed, The Easy Way!
Which HPE tool should you use? - Correct Answer ✔✔ - System Management
Homepage
QUESTION NO: 6
A customer is considering an upgrade of their network, which connects 10 servers. The
customer has a converged data center networking architecture with Layer 2 and Layer 3
functionality.
Which HPE product family will meet this customer's needs? - Correct Answer ✔✔ -
FlexFabric
QUESTION NO: 7
A customer needs to enable HPE Proactive Care and automated case creation for
server hardware failures in their OneView environment.
Which step do you need to complete in OneView to accomplish these tasks? - Correct
Answer ✔✔ - Enable remote support from the Settings page.
QUESTION NO: 8
You are designing a solution to run a Citrix XenDesktop workload.
Which HPE planning and designing resource contains a detailed example of this type of
solution, including a list of all the hardware and software components? - Correct
Answer ✔✔ - Reference Architecture
, QUESTION NO: 9
You are troubleshooting a HPE ProLiant rack-mount server. All installed server fans
constantly run at 100%.
Which action should you take first? - Correct Answer ✔✔ - Reseat drive blanks
QUESTION NO: 10
You need to install 10 HPE ProLiant servers in an environment without DHCP. Which
tool can you use to set up remote management? - Correct Answer ✔✔ - Intelligent
Management Center
QUESTION NO: 11
A customer needs to create a large RAID set for archive storage on large-capacity
drives. Which RAID level is recommended for this customer? - Correct Answer ✔✔ -
RAID 6
QUESTION NO: 12
ou are designing a system for a customer that runs an OLTP application. The customer
has SAN based storage.
They need to accelerate application performance.
Which HPE ProLiant Gen10 feature set will address this customer's needs? - Correct
Answer ✔✔ - intelligent system tuning
QUESTION NO: 13
A customer is building out their rack of servers and storage systems. They need a high-
performance network with a simple centralized management capability and deep buffer
support for iSCSI. They expect high growth in their virtualization environment.
Which solution will best meet the customer's needs? - Correct Answer ✔✔ - FlexFabric
QUESTION NO: 14
A customer needs to centralize their backup environment for their branch office They
plan to use HPE StoreOnce with catalyst What should they implement within their
backups software to minimize the network load on the remote site? - Correct Answer
✔✔ - source-side deduplication
QUESTION NO: 16
A customer needs to connect two switches without VLANs or Spanning Tree. To which
mode should the switches be set? - Correct Answer ✔✔ - Gateway Mode
QUESTION NO: 17
You have completed a non-disruptive activation of firmware on an SN6000 switch.
Which session must be restarted manually? - Correct Answer ✔✔ - telnet session
QUESTION NO: 18
You are installing a combined server and storage solution at a customer location. What
must you keep in mind regarding the typical requirements for the location? (Choose
two.) - Correct Answer ✔✔ - A. Room temperature must not exceed 35 °C (95 °F)
D. There must be at least a 10 cm (4 in) clearance space at the front and back of the
components within the racks
QUESTION NO: 19
A customer wants to safeguard their server firmware and asks you about the HPE
ProLiant Gen10 features that provide this level of security.
