CA Crematory Manager's Test Questions with Complete Solutions.

CA Crematory Manager's Test Questions with Complete Solutions. What does the timer do? correct answers It shuts off either the primary burner, or afterburner at a preset time so that the operator doesn't have to shut them off manually. Name the 8 systems that have some kind of control, either by the operator or by an automated programmer. correct answers 1) Electric Activated Door Control 2) Blower 3) Combustion Burner 4) Afterburner 5) Timer 6) Temperature Controller/Indicator 7) Chart Reorder 8) Opacity Monitor What is the next step after the 7 start-up steps? correct answers Use a cardboard roller to insert case into primary chamber. If repositioning is necessary, what body part is likely to need to be moved, and to where? correct answers The trunk part of the torso or bone mass; to directly over the flame of the burner. How cool should the primary chamber be before attempting removal of cremated remains? correct answers Blow 400F What are the two steps involved in processing cremated remains? correct answers 1) Removal of foreign objects 2) Reduction of particle size by grinding, crushing, pulverizing, etc to consistency appropriate for disposition. Name 7 types of foreign objects whose removal is consistent with processing. correct answers 1) Pacemakers 2) Prosthesis 3) Dental Gold 4) Jewelry 5) Mementos 6) Screw, nails, or staples 7) Casket hardware not previously removed. 6 step procedure for processing cremated remains correct answers 1) Check processor for cleanliness 2) Remove foreign material from remains 3) Retrieve ID disc 4) Place remains in processor and process 5) Brush all residue into catch tray 6) Take tray and tag to packaging table Minimum thickness of plastic bag inside urn. correct answers 2 mm Where in urn should ID disc be placed? correct answers On plastic tie that closes bag inside.