CERTIFIED LIFE SAFETY SPECIALIST (CLSS-HC)
EXAM QUESTIONS AND ANSWERS | NEW UPDATE
2026/2027 | 100% CORRECT.
1. Q: What is the minimum fire rating required for a fire barrier in
healthcare occupancies? ANSWER 1-hour fire rating minimum, with
2hour rating required for certain vertical openings and hazardous areas.
2. Q: What type of sprinkler system is typically required in patient
sleeping rooms? ANSWER Quick-response sprinklers with a maximum
temperature rating of 155°F (68°C).
3. Q: How often must fire pumps be tested according to NFPA 25?
ANSWER Weekly for 30 minutes minimum, with annual flow tests and
comprehensive maintenance.
4. Q: What is the maximum travel distance to an exit in a healthcare
facility? ANSWER 200 feet (61 m) in non-sprinklered buildings, 250 feet
(76 m) in sprinklered buildings.
5. Q: What is the maximum area allowed for an atrium in a healthcare
facility? ANSWER No specific limit, but must comply with smoke
control requirements and fire protection systems.
6. Q: How often must standpipe systems be tested? ANSWER 5-year
hydrostatic test and annual flow test of standpipe outlets.
7. Q: What is the required fire flow for a typical hospital? ANSWER
Varies by size and construction, typically 2,000-4,000 GPM for large
facilities.
8. Q: What pressure must fire department connections maintain?
ANSWER Minimum 150 psi (10.3 bar) residual pressure at the highest
sprinkler.
9. Q: What type of detection system is required in patient rooms?
ANSWER Smoke detection is required, with heat detection in areas where
smoke detection is inappropriate.
,10. Q: How long must emergency lighting operate during power failure?
ANSWER Minimum 90 minutes at required illumination levels.
11. Q: What is the minimum illumination level required for emergency
lighting? ANSWER Average of 1 foot-candle (11 lux) with minimum 0.1
foot-candle (1 lux).
12. Q: How many means of egress are required from patient sleeping
rooms? ANSWER Two means of egress, with at least one being a door
directly to an exit access corridor.
13. Q: What is the minimum width for exit corridors in healthcare
facilities? ANSWER 8 feet (2440 mm) clear width in areas used by bed
patients.
14. Q: How often should fire doors be inspected? ANSWER Annually,
with additional monthly visual inspections recommended.
15. Q: What type of glass is required in fire-rated door assemblies?
ANSWER Wire glass or approved fire-rated glazing materials with appropriate
ratings.
16. Q: Where are manual fire alarm pull stations required? ANSWER At
each exit, within 5 feet of exit doors, and at maximum 200-foot intervals.
17. Q: How often must emergency generators be exercised? ANSWER
Monthly for minimum 30 minutes under at least 30% of nameplate load.
18. Q: What type of construction is required for fire walls? ANSWER
2hour to 4-hour fire-rated construction extending from foundation to roof.
19. Q: How often must fire extinguishers be inspected? ANSWER
Monthly visual inspection, annual maintenance, 6-year teardown (if
applicable).
20. Q: What is the minimum fire rating for vertical shafts? ANSWER
2hour fire rating for shafts connecting more than three stories.
21. Q: Where must fire dampers be installed? ANSWER At all
penetrations of fire-rated assemblies by HVAC ducts.
, Thank you for Purchasing this exam
Study Guide. We provide high-quality
academic materials to help students excel
in exams. Our other Services include but
not limited to: academic research,
University & College assignments
writing, essay writing, Online Classes,
and research projects. Our services are
reliable, affordable, and plagiarism-free.
All the Best in your Exam. For more
information; Contact us at:
or
0R +254
741484450
22. Q: What is the required separation between buildings on the same
property? ANSWER Based on fire separation distance calculations,
typically 10-30 feet minimum.
23. Q: What is the maximum response time for emergency generator
startup? ANSWER 10 seconds for life safety systems, 60 seconds for
HVAC systems.
24. Q: How are healthcare facilities classified for fire protection purposes?
ANSWER Group I-2 occupancy under the International Building Code.
25. Q: What type of sprinkler heads are prohibited in patient areas?
EXAM QUESTIONS AND ANSWERS | NEW UPDATE
2026/2027 | 100% CORRECT.
1. Q: What is the minimum fire rating required for a fire barrier in
healthcare occupancies? ANSWER 1-hour fire rating minimum, with
2hour rating required for certain vertical openings and hazardous areas.
2. Q: What type of sprinkler system is typically required in patient
sleeping rooms? ANSWER Quick-response sprinklers with a maximum
temperature rating of 155°F (68°C).
3. Q: How often must fire pumps be tested according to NFPA 25?
ANSWER Weekly for 30 minutes minimum, with annual flow tests and
comprehensive maintenance.
4. Q: What is the maximum travel distance to an exit in a healthcare
facility? ANSWER 200 feet (61 m) in non-sprinklered buildings, 250 feet
(76 m) in sprinklered buildings.
5. Q: What is the maximum area allowed for an atrium in a healthcare
facility? ANSWER No specific limit, but must comply with smoke
control requirements and fire protection systems.
6. Q: How often must standpipe systems be tested? ANSWER 5-year
hydrostatic test and annual flow test of standpipe outlets.
7. Q: What is the required fire flow for a typical hospital? ANSWER
Varies by size and construction, typically 2,000-4,000 GPM for large
facilities.
8. Q: What pressure must fire department connections maintain?
ANSWER Minimum 150 psi (10.3 bar) residual pressure at the highest
sprinkler.
9. Q: What type of detection system is required in patient rooms?
ANSWER Smoke detection is required, with heat detection in areas where
smoke detection is inappropriate.
,10. Q: How long must emergency lighting operate during power failure?
ANSWER Minimum 90 minutes at required illumination levels.
11. Q: What is the minimum illumination level required for emergency
lighting? ANSWER Average of 1 foot-candle (11 lux) with minimum 0.1
foot-candle (1 lux).
12. Q: How many means of egress are required from patient sleeping
rooms? ANSWER Two means of egress, with at least one being a door
directly to an exit access corridor.
13. Q: What is the minimum width for exit corridors in healthcare
facilities? ANSWER 8 feet (2440 mm) clear width in areas used by bed
patients.
14. Q: How often should fire doors be inspected? ANSWER Annually,
with additional monthly visual inspections recommended.
15. Q: What type of glass is required in fire-rated door assemblies?
ANSWER Wire glass or approved fire-rated glazing materials with appropriate
ratings.
16. Q: Where are manual fire alarm pull stations required? ANSWER At
each exit, within 5 feet of exit doors, and at maximum 200-foot intervals.
17. Q: How often must emergency generators be exercised? ANSWER
Monthly for minimum 30 minutes under at least 30% of nameplate load.
18. Q: What type of construction is required for fire walls? ANSWER
2hour to 4-hour fire-rated construction extending from foundation to roof.
19. Q: How often must fire extinguishers be inspected? ANSWER
Monthly visual inspection, annual maintenance, 6-year teardown (if
applicable).
20. Q: What is the minimum fire rating for vertical shafts? ANSWER
2hour fire rating for shafts connecting more than three stories.
21. Q: Where must fire dampers be installed? ANSWER At all
penetrations of fire-rated assemblies by HVAC ducts.
, Thank you for Purchasing this exam
Study Guide. We provide high-quality
academic materials to help students excel
in exams. Our other Services include but
not limited to: academic research,
University & College assignments
writing, essay writing, Online Classes,
and research projects. Our services are
reliable, affordable, and plagiarism-free.
All the Best in your Exam. For more
information; Contact us at:
or
0R +254
741484450
22. Q: What is the required separation between buildings on the same
property? ANSWER Based on fire separation distance calculations,
typically 10-30 feet minimum.
23. Q: What is the maximum response time for emergency generator
startup? ANSWER 10 seconds for life safety systems, 60 seconds for
HVAC systems.
24. Q: How are healthcare facilities classified for fire protection purposes?
ANSWER Group I-2 occupancy under the International Building Code.
25. Q: What type of sprinkler heads are prohibited in patient areas?
