NTN FIRETEAM EXAM NEWEST 2026/2027 ACTUAL EXAM WITH
COPLETE 50 QUESTIONS AND CORRECT ANSWERS (VERIFIED) GRADED
A+ | NTN FireTEAM Real Exam | 100% GUARANTEED PASS.
What do you use to tighten a bolt - Correct Answer > socket wrench
What shape is a drillbit used for metal - Correct Answer > sleek shape, not
pointed, no pertruding edges for operations at high speed to go
through hard metal or sometimes wood
What shape drillbit is hand operated for drilling wood - Correct Answer >
the tip is a threaded point, pertruding edges to cut through soft wood.
Mechanical Brick Factory: What do you do if there is unmelted
material? - Correct Answer > Stop, call mechanic
Mechanical Brick Factory: If you want more material from the start of
the assembly, what do you do? - Correct Answer > Adjust amount released
by
Hopper, DONT adjust speed of belt
, Small gear vs big gear, what turns faster? - Correct Answer > Big gear
When installing Bolt w/ washer and nut, what side faces you? - Correct
Answer > Threaded end goes away from body to prevent hazard
What shape drillbit is used from ceramics/masonry - Correct Answer >
squared off tip bit
What tool is used to cut bolts? - Correct Answer > Hacksaw (NOT
BOLTCUTTERS)
Mechanical Brick Factory: If the first grinder is stuck, what do you
suspect? - Correct Answer > There is a jam in the grinder
Mechanical Brick Factory: How do you fix a grinder jam? - Correct Answer
> You put it in reverse manually
Mechanical Brick Factory: If water is pouring over the edge, what do
you suspect is wrong? - Correct Answer > Green Filter CLOG Mechanical
Brick Factory: Water tank is rising quickly, how do you fix it? - Correct
Answer > Reduce amount of fresh water
COPLETE 50 QUESTIONS AND CORRECT ANSWERS (VERIFIED) GRADED
A+ | NTN FireTEAM Real Exam | 100% GUARANTEED PASS.
What do you use to tighten a bolt - Correct Answer > socket wrench
What shape is a drillbit used for metal - Correct Answer > sleek shape, not
pointed, no pertruding edges for operations at high speed to go
through hard metal or sometimes wood
What shape drillbit is hand operated for drilling wood - Correct Answer >
the tip is a threaded point, pertruding edges to cut through soft wood.
Mechanical Brick Factory: What do you do if there is unmelted
material? - Correct Answer > Stop, call mechanic
Mechanical Brick Factory: If you want more material from the start of
the assembly, what do you do? - Correct Answer > Adjust amount released
by
Hopper, DONT adjust speed of belt
, Small gear vs big gear, what turns faster? - Correct Answer > Big gear
When installing Bolt w/ washer and nut, what side faces you? - Correct
Answer > Threaded end goes away from body to prevent hazard
What shape drillbit is used from ceramics/masonry - Correct Answer >
squared off tip bit
What tool is used to cut bolts? - Correct Answer > Hacksaw (NOT
BOLTCUTTERS)
Mechanical Brick Factory: If the first grinder is stuck, what do you
suspect? - Correct Answer > There is a jam in the grinder
Mechanical Brick Factory: How do you fix a grinder jam? - Correct Answer
> You put it in reverse manually
Mechanical Brick Factory: If water is pouring over the edge, what do
you suspect is wrong? - Correct Answer > Green Filter CLOG Mechanical
Brick Factory: Water tank is rising quickly, how do you fix it? - Correct
Answer > Reduce amount of fresh water
