2026/2027 AND HIGH YIELD PRACTICE QUESTIONS
COMPLETE & ACCURATE EXAM APPROVED QUESTIONS
AND CORRECT VERIFIED SOLUTIONS (100% CORRECT
VERIFIED ANSWERS) CURRENTLY UPDATED VERSION
2026 EDITION |GUARANTEED PASS
The required air pressure in a dry-pipe system is usually about ____ psi
(kPa) above the trip pressure
ANSWERS: 20 (140)
Which pattern has limited capability for cooling hot gases?
ANSWERSsolid stream
Which automatic alarm systems are used to protect large commercial
and industrial buildings
ANSWERSproprietary systems
What is a main type of liquified petroleum gas (LPG) ?
ANSWERSpropane
Supervising fire alarm systems are designed to be supervised by:
ANSWERSThe systems themselves
,Air-aspirating foam nozzles provide what?
ANSWERSmaximum expansion of the agent, but has less stream reach
than a standard fog nozzle
Which type of water main valves are usually the non rising step type?
ANSWERSGate valve
When are most fire inspections conducted?
ANSWERSduring normal business hours
Application foams produce _____________ _.
ANSWERSa vapor sealing film of surface-active water solution of a liquid
surface
What would require a tactical channel?
ANSWERSstructural fire
What type of structural collapse occurs when the outer walls remain
intact and the upper floors and / or roof structure fail in the middle?
ANSWERSV-shaped collapse
When removing tempered glass, where should the window be struck?
ANSWERSin the lower corner
, ___________: the forward velocity pressure at a discharged opening while
water is flowing?
ANSWERSFlow pressure
When is batch mixing ineffective?
ANSWERSon large incidents because attack lines must be shut down
when refilling an empty tank
Water applied to ordinary combustibles usually:
ANSWERS
reduce flame spread
Which type of valves are used to control the flow from a hydrant?
gate valves
The threads on a pump male discharge outlets are protected by fittings
called ____ _.
ANSWERShose caps
who should begin stabilization of a patient trapped inside a vehicle?
ANSWERSa rescuer with licensed EMS training
Which of the following is an element of patient removal?
ANSWERScovering sharp edges