NYC DMV MTA BUS CDL B Brake and Suspension
system Complete Real Exam Questions And
Correct Answers (Verified Answers) Already
Graded A+ | Guaranteed Success!! Newest Exam
| Just Released!!
Brake Chamber :
Not Accessible if it were i would make sure its securely mounted, not
cracked or broken, no audible leaks and all hardware present and tight
Brake Hose :
Should not be split or cut, no audible leaks, securely mounted at both
ends.
Brake Lining :
Not equipped if it were i would make sure its not worn dangerously thin
, Brake Drum :
Not Equipped if it were i would make sure theres no dents, cracks, holes,
loose or missing bolts
Brake Rotors/Pads :
Brake rotors and pads are equipped on this bus. Pads are not Accessible
if it were i will make sure they are not worn dangerously thin
Slack Adjuster :
Not equipped if it were i would make sure the push rod has no more than
1 inch of play and it's mounted at a 90 degree angle to the brake
chamber
Air bag mounts :
Securely mounted all hardware present and tight
Air bags :
Securely mounted, no split or cut, no audible leaks all hardware present
and tight
shock absorber :
Secure on both ends and no leaks
Leaf Spring Mount :
Not Equipped if it were i would make sure its securely mounted to the
frame and all hardware present and tight
system Complete Real Exam Questions And
Correct Answers (Verified Answers) Already
Graded A+ | Guaranteed Success!! Newest Exam
| Just Released!!
Brake Chamber :
Not Accessible if it were i would make sure its securely mounted, not
cracked or broken, no audible leaks and all hardware present and tight
Brake Hose :
Should not be split or cut, no audible leaks, securely mounted at both
ends.
Brake Lining :
Not equipped if it were i would make sure its not worn dangerously thin
, Brake Drum :
Not Equipped if it were i would make sure theres no dents, cracks, holes,
loose or missing bolts
Brake Rotors/Pads :
Brake rotors and pads are equipped on this bus. Pads are not Accessible
if it were i will make sure they are not worn dangerously thin
Slack Adjuster :
Not equipped if it were i would make sure the push rod has no more than
1 inch of play and it's mounted at a 90 degree angle to the brake
chamber
Air bag mounts :
Securely mounted all hardware present and tight
Air bags :
Securely mounted, no split or cut, no audible leaks all hardware present
and tight
shock absorber :
Secure on both ends and no leaks
Leaf Spring Mount :
Not Equipped if it were i would make sure its securely mounted to the
frame and all hardware present and tight
