Welding Nocti, Welding NOCTI TEST BANK 2026/2027
PRACTICE QUESTIONS AND STUDY GUIDE COMPLETE
ACCURATE EXAM APPROVED QUESTIONS WITH WELL
ELABORATED ANSWERS WITH RATIONALES (100%
CORRECT VERIFIED SOLUTIONS) LATEST UPDATED
VERSION 2026 EDITION|GUARANTEED PASS A+
When SMAW between 100 and 200 amps which filter is generally going
to be used
ANSWERS: No.14
Arc welding helmets protect face and eyes from
ANSWERS: Ultraviolet rays
The space between increments for an intermittent weld is termed the
ANSWERS: pitch
Information contained in thetail of a weld symbol might include
ANSWERS: specification
,what weld symbol indicates a weld that extends completely around a
joint?
ANSWERS: Circle
Adjust the preheat flame on an ofc torch to a _____ Flame
ANSWERS: Neutral
The gap produced after an ofc cut is made is referred to as the
ANSWERS: Kerf
Mild steel may be cut with the ofc process because
ANSWERS: a chemical reaction occurs between iron and the cutting
oxygen
A neutral Oxyacetylene flame has a temperature range of
ANSWERS: 5800-6300 degrees farenheight
When opening an acetylene cylinder, rotate the cylinder valve a
maximum of ____ turns
ANSWERS: 1 to 1 1/2 turns or smallest option
When selecting a cutting tip, the size is based on
ANSWERS: Material thickness
When a cutting attachment is added to a welding torch body, The O2
valve on the torch body is opened?
ANSWERS: Completly
, Use the same style cutting top for both
ANSWERS: acetylene and propane
before connecting a regulator to a cylinder
ANSWERS: blow debris out of the outlet nozzle
to prevent diaphram damage to a regulator
ANSWERS: fully release the pressure adjusting screw before opening
the cylinder valve
Open an O2 cylinder valve all the way to
ANSWERS: ensure a full flow of oxygen
When moving a compressed gas cylinder, check that a safety cap is in
place to prevent damage to the
ANSWERS: valve
PRACTICE QUESTIONS AND STUDY GUIDE COMPLETE
ACCURATE EXAM APPROVED QUESTIONS WITH WELL
ELABORATED ANSWERS WITH RATIONALES (100%
CORRECT VERIFIED SOLUTIONS) LATEST UPDATED
VERSION 2026 EDITION|GUARANTEED PASS A+
When SMAW between 100 and 200 amps which filter is generally going
to be used
ANSWERS: No.14
Arc welding helmets protect face and eyes from
ANSWERS: Ultraviolet rays
The space between increments for an intermittent weld is termed the
ANSWERS: pitch
Information contained in thetail of a weld symbol might include
ANSWERS: specification
,what weld symbol indicates a weld that extends completely around a
joint?
ANSWERS: Circle
Adjust the preheat flame on an ofc torch to a _____ Flame
ANSWERS: Neutral
The gap produced after an ofc cut is made is referred to as the
ANSWERS: Kerf
Mild steel may be cut with the ofc process because
ANSWERS: a chemical reaction occurs between iron and the cutting
oxygen
A neutral Oxyacetylene flame has a temperature range of
ANSWERS: 5800-6300 degrees farenheight
When opening an acetylene cylinder, rotate the cylinder valve a
maximum of ____ turns
ANSWERS: 1 to 1 1/2 turns or smallest option
When selecting a cutting tip, the size is based on
ANSWERS: Material thickness
When a cutting attachment is added to a welding torch body, The O2
valve on the torch body is opened?
ANSWERS: Completly
, Use the same style cutting top for both
ANSWERS: acetylene and propane
before connecting a regulator to a cylinder
ANSWERS: blow debris out of the outlet nozzle
to prevent diaphram damage to a regulator
ANSWERS: fully release the pressure adjusting screw before opening
the cylinder valve
Open an O2 cylinder valve all the way to
ANSWERS: ensure a full flow of oxygen
When moving a compressed gas cylinder, check that a safety cap is in
place to prevent damage to the
ANSWERS: valve
