Adhesive Anchor Training
Comprehensive Resource To Help You Ace 2026-2027 Exams
Includes Frequently Tested Questions With ELABORATED
100% Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
1. An anchor system is made up of an: - Correct Answer: adhesive, anchor,
drilling equipment, cleaning equipment, installation equipment, MPII, and
MSDS
2. An anchor connection includes - Correct Answer: an attachment, an
anchor, and the substrate
3. Adhesive anchors are cast in concrete before the concrete hardens(true or
false) - Correct Answer: False
4. What piece of equipment has a static mixing element? - Correct
Answer: Mixing nozzle
5. Adhesive anchor failure in tension does NOT occur by - Correct Answer:
concrete pryout failure
6. Adhesive anchor failure modes in shear include: - Correct Answer: steel
failure, concrete pryout failure, and concrete breakout failure
,7. Installation factors that influence the strength of the adhesive anchor bond
include: - Correct Answer: drilling of the hole following MPII
cleaning of the hole following MPII
injecting the adhesive following the MPII
8. Adhesive should be stored at: - Correct Answer: As directed by the MPII
9. Gel time is? - Correct Answer: 1. the amount of time between first
mixing the adhesive and when it becomes a noon-flowing material
2. increased when the temperature of the concrete are colder
3. decreased when the temperatures of the concrete are warmer
10.Proper installation of adhesive anchor system is important to ensure that
the system achieves its maximum performance and to prevent anchor
failures( True or Flase) - Correct Answer: True
11.ACI ( ), Appendix D requires that installation of adhesive anchors
horizontally or upwardly uninclined that support sustained tension loads
are preformed by certified personnel - Correct Answer: 318
12.A post-installed anchor is? - Correct Answer: installed in an existing
concrete member
13.A tension load is a load applied to what axis of the installed anchor -
Correct Answer: Parallel (the same)
, 14.An adhesive anchor may fail if the applied load exceeds the strength of the
bond between the adhesive and the concrete or the bond between the
adhesive and the anchor (true or false) - Correct Answer: True
15.An anchor can also be called: - Correct Answer: 1. an anchor element
2. an anchor rod
3. a threaded rod
4. an anchoring element
16.Rigorous testing and evaluation requirements for adhesive anchor systems
are detailed in ACI ( ) "acceptance criteria for qualification of post installed
adhesive anchors in concrete - Correct Answer: 355.3
17.Manufacturers provide MPII, the ( ) , that are unique for each adhesive
anchor product - Correct Answer: manufacturers printed installation
instructions
18.MPII include directions for - Correct Answer: 1. drilling the hole
2. cleaning the hole
3. preparing the installation equipment
4. filing the hole
5. drill bit sizes
19.For and overhead installation, if the adhesive supplied is not qualified for
overhead use by ACI 355.4 or AC308, the installer should complete the
installation as instructed (true of false) - Correct Answer: False
Comprehensive Resource To Help You Ace 2026-2027 Exams
Includes Frequently Tested Questions With ELABORATED
100% Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
1. An anchor system is made up of an: - Correct Answer: adhesive, anchor,
drilling equipment, cleaning equipment, installation equipment, MPII, and
MSDS
2. An anchor connection includes - Correct Answer: an attachment, an
anchor, and the substrate
3. Adhesive anchors are cast in concrete before the concrete hardens(true or
false) - Correct Answer: False
4. What piece of equipment has a static mixing element? - Correct
Answer: Mixing nozzle
5. Adhesive anchor failure in tension does NOT occur by - Correct Answer:
concrete pryout failure
6. Adhesive anchor failure modes in shear include: - Correct Answer: steel
failure, concrete pryout failure, and concrete breakout failure
,7. Installation factors that influence the strength of the adhesive anchor bond
include: - Correct Answer: drilling of the hole following MPII
cleaning of the hole following MPII
injecting the adhesive following the MPII
8. Adhesive should be stored at: - Correct Answer: As directed by the MPII
9. Gel time is? - Correct Answer: 1. the amount of time between first
mixing the adhesive and when it becomes a noon-flowing material
2. increased when the temperature of the concrete are colder
3. decreased when the temperatures of the concrete are warmer
10.Proper installation of adhesive anchor system is important to ensure that
the system achieves its maximum performance and to prevent anchor
failures( True or Flase) - Correct Answer: True
11.ACI ( ), Appendix D requires that installation of adhesive anchors
horizontally or upwardly uninclined that support sustained tension loads
are preformed by certified personnel - Correct Answer: 318
12.A post-installed anchor is? - Correct Answer: installed in an existing
concrete member
13.A tension load is a load applied to what axis of the installed anchor -
Correct Answer: Parallel (the same)
, 14.An adhesive anchor may fail if the applied load exceeds the strength of the
bond between the adhesive and the concrete or the bond between the
adhesive and the anchor (true or false) - Correct Answer: True
15.An anchor can also be called: - Correct Answer: 1. an anchor element
2. an anchor rod
3. a threaded rod
4. an anchoring element
16.Rigorous testing and evaluation requirements for adhesive anchor systems
are detailed in ACI ( ) "acceptance criteria for qualification of post installed
adhesive anchors in concrete - Correct Answer: 355.3
17.Manufacturers provide MPII, the ( ) , that are unique for each adhesive
anchor product - Correct Answer: manufacturers printed installation
instructions
18.MPII include directions for - Correct Answer: 1. drilling the hole
2. cleaning the hole
3. preparing the installation equipment
4. filing the hole
5. drill bit sizes
19.For and overhead installation, if the adhesive supplied is not qualified for
overhead use by ACI 355.4 or AC308, the installer should complete the
installation as instructed (true of false) - Correct Answer: False
