SOS MECHANIC CERTIFICATE AUTOMATIC TRANSMISSION 2026 COMPLETE SOLUTION SCRIPT ACCURATE RESPONSES A+

SOS MECHANIC CERTIFICATE AUTOMATIC
TRANSMISSION 2026 COMPLETE SOLUTION
SCRIPT ACCURATE RESPONSES A+
◉ As blower motor speed decreases the voltage drop across the
resistance block..... Answer: increases


◉ What should you do first when replacing junction block or fuse?.
Answer: Unlock the battery ground cable


◉ The polarity of the voltage applied to the electromagnetic coils of an
actual working DC motor is..... Answer: a commutator


◉ When performing a volt drop test the volt meter setting should be set
to the following... Answer: 3 volts


◉ The symbol at the RIGHT represents...... Answer: a relay


◉ Which device is used to monitor throttle position on the computer.
Answer: potentiometer


◉ A reading of .8 volts on the volt meter #2 would indicate...... Answer:
excessive resistance

, ◉ In a conventional wiring diagram a dot at the enter section. Answer:
Splice


◉ After replacement of a defective blower motor the teen found motor
spins but no air?. Answer: reversed polarity to the motor


◉ Which piece of test equipment must be connected parallel. Answer:
Volt meter


◉ A vehicles blower motor only works on high...... Answer: blower
resistor


◉ The component D in the following. Answer: lamp


◉ Which one of the following component can be damaged by electrical
discharge. Answer: all of the above


◉ An am-meter should be connected in which of the following. Answer:
In series with the load


◉ Direct transmitter controlled switches of a component. Answer: less
current, high frequency


◉ The following symbol at the right. Answer: Diode ->}-