CPSI Exam Prep Questions and Answers
100% Pass
Circular use zone where swing motion occurs cannot overlap to a distance
of . ✔✔Y + 72"
(y = vertical distance from the top of sitting surface to pivot point)
The front and rear use zone where swing motion occurs cannot overlap for a distance of
to both the front and the rear. ✔✔2x
x = the vertical distance from the protective surface to the pivot point of the swing.
What is the handhold length of a seated rocking equipment ? ✔✔min. length 3"
Wheelchair accessible platform:
The openings in platform, and between edge and railing may not exceed " horizontal
opening ✔✔1/2" (0.5")
What is the minimum side use zone for a rotating swing support structure? ✔✔72"
,Comprehensive program of playground safety includes. ....✔✔- audits
-inspections
-maintenance
What does the middle projection gauge measure? ✔✔projection entering brain thru eye socket
What does the large projection gauge measure? ✔✔soft tissue damage such as bruise or ruptured
organs in abdominal area
What is the max height of a balance beam? ✔✔12" max hgt for 2-5 yo
16" max hgt for 5-12 yo
What is min overlap use zone for To-Fro Swing support structure? ✔✔72"
What is the dowel size of the crush/shear test probe on Merry - Go - Rounds? ✔✔0.30" (5/16")
Entanglement hazards:
, If connecting devices that have in-fill such as plastic or cable that completely fills the interior
space of both loops preventing entry items of clothing, is this exempt? ✔✔YES
What is the minimum footrest length of a seated spring rocking equipment? ✔✔3 1/2"
What is the dowel size of crush / sheer hazards with movement? ✔✔0.62" (5/8")
Partially Bound Openings:
The template is considered fully inserted if it goes below the top of the opening more than "
✔✔3/4" (0.75")
What is the minimum diameter of hand gripping components? ✔✔0.95"
What is the dowel diameter for roller slides? ✔✔0.19" (3/16")
What is the minimum diameter of handrails? ✔✔0.95"
What is the diameter of a medium dowel? ✔✔.30" (5/16")
100% Pass
Circular use zone where swing motion occurs cannot overlap to a distance
of . ✔✔Y + 72"
(y = vertical distance from the top of sitting surface to pivot point)
The front and rear use zone where swing motion occurs cannot overlap for a distance of
to both the front and the rear. ✔✔2x
x = the vertical distance from the protective surface to the pivot point of the swing.
What is the handhold length of a seated rocking equipment ? ✔✔min. length 3"
Wheelchair accessible platform:
The openings in platform, and between edge and railing may not exceed " horizontal
opening ✔✔1/2" (0.5")
What is the minimum side use zone for a rotating swing support structure? ✔✔72"
,Comprehensive program of playground safety includes. ....✔✔- audits
-inspections
-maintenance
What does the middle projection gauge measure? ✔✔projection entering brain thru eye socket
What does the large projection gauge measure? ✔✔soft tissue damage such as bruise or ruptured
organs in abdominal area
What is the max height of a balance beam? ✔✔12" max hgt for 2-5 yo
16" max hgt for 5-12 yo
What is min overlap use zone for To-Fro Swing support structure? ✔✔72"
What is the dowel size of the crush/shear test probe on Merry - Go - Rounds? ✔✔0.30" (5/16")
Entanglement hazards:
, If connecting devices that have in-fill such as plastic or cable that completely fills the interior
space of both loops preventing entry items of clothing, is this exempt? ✔✔YES
What is the minimum footrest length of a seated spring rocking equipment? ✔✔3 1/2"
What is the dowel size of crush / sheer hazards with movement? ✔✔0.62" (5/8")
Partially Bound Openings:
The template is considered fully inserted if it goes below the top of the opening more than "
✔✔3/4" (0.75")
What is the minimum diameter of hand gripping components? ✔✔0.95"
What is the dowel diameter for roller slides? ✔✔0.19" (3/16")
What is the minimum diameter of handrails? ✔✔0.95"
What is the diameter of a medium dowel? ✔✔.30" (5/16")
