OSHA 30 Final Exam Review With 100%
Correct And Verified Answers
TE
Hand tools are powered instruments, which can be very hazardous when improperly
used due to their power source. - Correct Answer-False
S
Which of the following is not a correct general precaution that should be followed by all
power tool users? - Correct Answer-Handle tools by the cord or hose
TB
Safety guards must never be removed when a tool is being used. - Correct Answer-True
What is the main danger associated with pneumatic tools? - Correct Answer-Getting hit
by tool's attachment or fastener
A
The operating control on hand-held power tools must be located at to minimize the
possibility of accidental operation, if such accidental operation would constitute a hazard
to employees. - Correct Answer-True
N
What requirements are necessary to protect an electric tool user from shock? - Correct
Answer-Both A and B
KS
All portable, power-driven circular saws having a blade diameter greater than 3 in. must
be equipped with guards above and below the base plate or shoe - Correct Answer-
False
O
An important safety precaution to remember when operating powder-actuated tool is: -
Correct Answer-Inspect it before use and determine that it is clean and that all moving
parts operate freely
LU
Hydraulic jacks exposed to freezing temperatures must be kept warm with an internal
temperature lift. - Correct Answer-False
Who is responsible for the safe conditions of tools and equipment used in the
workplace? - Correct Answer-Employers
TI
What does MSD stand for? - Correct Answer-musculoskeletal disorders
O
You should change your working position frequently by: - Correct Answer-All of the
above
N
regardless of how good your working posture is, working in the same posture or sitting
for prolonged periods is not healthy. - Correct Answer-True
S
, Hazard prevention and control includes - Correct Answer-Implementing administrative
and engineering controls
TE
Pushing carries a greater risk of strain and injury. - Correct Answer-False
Uncontrollable shivering, loss of coordination, and slurred speech are symptoms of
what? - Correct Answer-Hypothermia
S
Types of heat illness include? - Correct Answer-All of the above
Implementing an ergonomic process is effective in reducing the risk of developing
TB
MSDs in high-risk industries. - Correct Answer-True
When does Working Restriction Protection end? - Correct Answer-The employee is able
to return to his or her regular job or a new position.
A
Reporting symptoms of MSD early does not help in stopping MSD. - Correct Answer-
False
N
Industrial hygiene is the science of keeping yourself favorable to health, free from dirt,
bacteria. - Correct Answer-False
KS
Gases are formless fluids that expand to occupy the space or enclosure the are
contained in. - Correct Answer-True
Biological hazards are - Correct Answer-Viruses
O
Which of the following is NOT a role of industrial hygienists? - Correct Answer-Training
employees on the recognition of hazards
LU
Noise can be reduced by: - Correct Answer-All of the above
Engineering controls are the last strategy of control an employer should use for job
hazards. - Correct Answer-False
Effective personal protective equipment must be? - Correct Answer-Regularly
TI
maintained
Employees who wear personal protective equipment do not need safety and health
O
training. - Correct Answer-False
During emergencies, hazards appear that normally are not found in the workplace. -
N
Correct Answer-True
Work practice controls include the company's general workplace rules and other
S
operation-specific rules. - Correct Answer-True
Correct And Verified Answers
TE
Hand tools are powered instruments, which can be very hazardous when improperly
used due to their power source. - Correct Answer-False
S
Which of the following is not a correct general precaution that should be followed by all
power tool users? - Correct Answer-Handle tools by the cord or hose
TB
Safety guards must never be removed when a tool is being used. - Correct Answer-True
What is the main danger associated with pneumatic tools? - Correct Answer-Getting hit
by tool's attachment or fastener
A
The operating control on hand-held power tools must be located at to minimize the
possibility of accidental operation, if such accidental operation would constitute a hazard
to employees. - Correct Answer-True
N
What requirements are necessary to protect an electric tool user from shock? - Correct
Answer-Both A and B
KS
All portable, power-driven circular saws having a blade diameter greater than 3 in. must
be equipped with guards above and below the base plate or shoe - Correct Answer-
False
O
An important safety precaution to remember when operating powder-actuated tool is: -
Correct Answer-Inspect it before use and determine that it is clean and that all moving
parts operate freely
LU
Hydraulic jacks exposed to freezing temperatures must be kept warm with an internal
temperature lift. - Correct Answer-False
Who is responsible for the safe conditions of tools and equipment used in the
workplace? - Correct Answer-Employers
TI
What does MSD stand for? - Correct Answer-musculoskeletal disorders
O
You should change your working position frequently by: - Correct Answer-All of the
above
N
regardless of how good your working posture is, working in the same posture or sitting
for prolonged periods is not healthy. - Correct Answer-True
S
, Hazard prevention and control includes - Correct Answer-Implementing administrative
and engineering controls
TE
Pushing carries a greater risk of strain and injury. - Correct Answer-False
Uncontrollable shivering, loss of coordination, and slurred speech are symptoms of
what? - Correct Answer-Hypothermia
S
Types of heat illness include? - Correct Answer-All of the above
Implementing an ergonomic process is effective in reducing the risk of developing
TB
MSDs in high-risk industries. - Correct Answer-True
When does Working Restriction Protection end? - Correct Answer-The employee is able
to return to his or her regular job or a new position.
A
Reporting symptoms of MSD early does not help in stopping MSD. - Correct Answer-
False
N
Industrial hygiene is the science of keeping yourself favorable to health, free from dirt,
bacteria. - Correct Answer-False
KS
Gases are formless fluids that expand to occupy the space or enclosure the are
contained in. - Correct Answer-True
Biological hazards are - Correct Answer-Viruses
O
Which of the following is NOT a role of industrial hygienists? - Correct Answer-Training
employees on the recognition of hazards
LU
Noise can be reduced by: - Correct Answer-All of the above
Engineering controls are the last strategy of control an employer should use for job
hazards. - Correct Answer-False
Effective personal protective equipment must be? - Correct Answer-Regularly
TI
maintained
Employees who wear personal protective equipment do not need safety and health
O
training. - Correct Answer-False
During emergencies, hazards appear that normally are not found in the workplace. -
N
Correct Answer-True
Work practice controls include the company's general workplace rules and other
S
operation-specific rules. - Correct Answer-True
