CONDUIT 2025 EXAM QUESTIONS AND
CORRECT ANSWERS
Is it possible to cut Rigid Non-Metallic Conduit with nylon string? - CORRECT
ANSWERS Yes
What is the "standard" take-up for a 1/2 inch EMT hand bender? - CORRECT ANSWERS 5
inches
What is the "standard" take-up for a 3/4 inch EMT hand bender? - CORRECT ANSWERS 6
inches
What is the "standard" take-up for a 1 inch EMT hand bender? - CORRECT ANSWERS 8
inches
What is the name of the bender used to bend only rigid conduit? - CORRECT
ANSWERS Hickey
What is the offset multiplier for a 30 degree bend? - CORRECT ANSWERS 2
What is the offset multiplier for a 45 degree bend? - CORRECT ANSWERS 1.41
Which conduit has the thickest wall, EMT, IMC or RGS? - CORRECT ANSWERS RGS
At what point on the body should the top of a 1/2 inch or 3/4 inch bender handle ideally reach?
- CORRECT ANSWERS Elbow
, What is the shrink per inch of rise of a 30 degree offset? - CORRECT ANSWERS 1/4 inch
What is the shrink per inch of rise of a 45 degree offset? - CORRECT ANSWERS 3/8 inch
Failure to keep adequate, constant foot pressure during a bend will result in? - CORRECT
ANSWERS cause ripples
What is the maximum number of bends in degrees that may be place in a conduit run between
pull points? - CORRECT ANSWERS 360
When calculating the number of degrees in a run do box offsets count? - CORRECT
ANSWERS Yes
The NEC referrers to PVC conduit as? - CORRECT ANSWERS Non metallic rigid conduit
The three letters PVC in words are what? - CORRECT ANSWERS Polyvinyl Chloride
What is the maximum trade size of Rigid Metal Conduit? - CORRECT ANSWERS 6 inches
What is the maximum trade size of Intermediate Metal Conduit? - CORRECT ANSWERS 4
inches
What is the maximum trade size of Rigid Non-Metallic Conduit? - CORRECT ANSWERS 6
inches
What is the maximum trade size of Electrical Metallic Tubing? - CORRECT ANSWERS 4
inches
CORRECT ANSWERS
Is it possible to cut Rigid Non-Metallic Conduit with nylon string? - CORRECT
ANSWERS Yes
What is the "standard" take-up for a 1/2 inch EMT hand bender? - CORRECT ANSWERS 5
inches
What is the "standard" take-up for a 3/4 inch EMT hand bender? - CORRECT ANSWERS 6
inches
What is the "standard" take-up for a 1 inch EMT hand bender? - CORRECT ANSWERS 8
inches
What is the name of the bender used to bend only rigid conduit? - CORRECT
ANSWERS Hickey
What is the offset multiplier for a 30 degree bend? - CORRECT ANSWERS 2
What is the offset multiplier for a 45 degree bend? - CORRECT ANSWERS 1.41
Which conduit has the thickest wall, EMT, IMC or RGS? - CORRECT ANSWERS RGS
At what point on the body should the top of a 1/2 inch or 3/4 inch bender handle ideally reach?
- CORRECT ANSWERS Elbow
, What is the shrink per inch of rise of a 30 degree offset? - CORRECT ANSWERS 1/4 inch
What is the shrink per inch of rise of a 45 degree offset? - CORRECT ANSWERS 3/8 inch
Failure to keep adequate, constant foot pressure during a bend will result in? - CORRECT
ANSWERS cause ripples
What is the maximum number of bends in degrees that may be place in a conduit run between
pull points? - CORRECT ANSWERS 360
When calculating the number of degrees in a run do box offsets count? - CORRECT
ANSWERS Yes
The NEC referrers to PVC conduit as? - CORRECT ANSWERS Non metallic rigid conduit
The three letters PVC in words are what? - CORRECT ANSWERS Polyvinyl Chloride
What is the maximum trade size of Rigid Metal Conduit? - CORRECT ANSWERS 6 inches
What is the maximum trade size of Intermediate Metal Conduit? - CORRECT ANSWERS 4
inches
What is the maximum trade size of Rigid Non-Metallic Conduit? - CORRECT ANSWERS 6
inches
What is the maximum trade size of Electrical Metallic Tubing? - CORRECT ANSWERS 4
inches
