CONDUIT BENDING TOP FINAL EXAM
QUESTIONS AND CORRECT ANSWERS
Yes - CORRECT ANSWERS Is it possible to cut Rigid Non-Metallic Conduit with nylon
string?
5 inches - CORRECT ANSWERS What is the "Standard" take-up for a 1/2-inch EMT hand
bender?
6-inches - CORRECT ANSWERS What is the "standard" take-up for a 3/4-inch EMT hand
bender?
8-inches - CORRECT ANSWERS What is the "standard" take-up for a 1-inch EMT hand
bender?
Hickey - CORRECT ANSWERS What is the name of the bender used to bend only rigid
conduit?
2 - CORRECT ANSWERS What is the offset multiplier for a 30 degree bend?
1.41 - CORRECT ANSWERS What is the offset multiplier for a 45 degree bend?
RGS - CORRECT ANSWERS Which conduit has the thickest wall, EMT, IMC, or RGS?
Elbow - CORRECT ANSWERS At what point on the body should the top of a 1/2-inch or
3/4-inch bender handle ideally reach?
, 1/4-inch - CORRECT ANSWERS What is the shrink per inch of rise of a 30 degree offset?
3/8-inch - CORRECT ANSWERS What is the shrink per inch of rise of a 45 degree offset?
Ripples on the wall of the conduit - CORRECT ANSWERS Failure to keep adequate,
constant foot pressure during a end will result in?
360 - CORRECT ANSWERS What is the maximum number of bends in degree that may be
place in a conduit run between pull points?
Yes - CORRECT ANSWERS When calculating the number of degrees in a run do box offsets
count? (Inspectors rarely enforce it, but if they do your toast)
Non Metallic Rigid Conduit - CORRECT ANSWERS The NEC referrers to PVC conduit as?
Polyvinyl Chloride - CORRECT ANSWERS The three letters 'PVC' in words are what? (Hint:
Poly)
6-inch - CORRECT ANSWERS What is the maximum trade size of Rigid Metal Conduit
4-inch - CORRECT ANSWERS What is the maximum trade size of intermediate Metal
Conduit?
6-inch - CORRECT ANSWERS What is the maximum trade size of Rigid Non-Metallic
Conduit?
4-inch - CORRECT ANSWERS What is the maximum trade size of Electrical Metallic Tubing?
QUESTIONS AND CORRECT ANSWERS
Yes - CORRECT ANSWERS Is it possible to cut Rigid Non-Metallic Conduit with nylon
string?
5 inches - CORRECT ANSWERS What is the "Standard" take-up for a 1/2-inch EMT hand
bender?
6-inches - CORRECT ANSWERS What is the "standard" take-up for a 3/4-inch EMT hand
bender?
8-inches - CORRECT ANSWERS What is the "standard" take-up for a 1-inch EMT hand
bender?
Hickey - CORRECT ANSWERS What is the name of the bender used to bend only rigid
conduit?
2 - CORRECT ANSWERS What is the offset multiplier for a 30 degree bend?
1.41 - CORRECT ANSWERS What is the offset multiplier for a 45 degree bend?
RGS - CORRECT ANSWERS Which conduit has the thickest wall, EMT, IMC, or RGS?
Elbow - CORRECT ANSWERS At what point on the body should the top of a 1/2-inch or
3/4-inch bender handle ideally reach?
, 1/4-inch - CORRECT ANSWERS What is the shrink per inch of rise of a 30 degree offset?
3/8-inch - CORRECT ANSWERS What is the shrink per inch of rise of a 45 degree offset?
Ripples on the wall of the conduit - CORRECT ANSWERS Failure to keep adequate,
constant foot pressure during a end will result in?
360 - CORRECT ANSWERS What is the maximum number of bends in degree that may be
place in a conduit run between pull points?
Yes - CORRECT ANSWERS When calculating the number of degrees in a run do box offsets
count? (Inspectors rarely enforce it, but if they do your toast)
Non Metallic Rigid Conduit - CORRECT ANSWERS The NEC referrers to PVC conduit as?
Polyvinyl Chloride - CORRECT ANSWERS The three letters 'PVC' in words are what? (Hint:
Poly)
6-inch - CORRECT ANSWERS What is the maximum trade size of Rigid Metal Conduit
4-inch - CORRECT ANSWERS What is the maximum trade size of intermediate Metal
Conduit?
6-inch - CORRECT ANSWERS What is the maximum trade size of Rigid Non-Metallic
Conduit?
4-inch - CORRECT ANSWERS What is the maximum trade size of Electrical Metallic Tubing?
