PRO TOOLS 210P LATEST ACTUAL EXAM WITH
COMPLETE QUESTIONS AND CORRECT
VERIFIED ANSWERS ALREADY GRADED A+
100% GUARANTEED TO PASS CONCEPTS
◉What is the name of the connector on both the SYNC HD and SYNC
I/O that is used to connect blackburst or house sync? Answer: Video Ref
In port
◉What is the name of the connector on both the SYNC HD and SYNC
I/O that woudl be used to distribute a common clock to multiple HD-
series audio interfaces? Answer: With Loop Sync you can connect all
Avid Peripherals in a closed loop allowing any peripheral to be the clock
master source for the entire system, without requiring any re-cabling.
◉List the most commonly used timecode frame rates for each of the
following: NTSC, PAL, Film, Music? Answer: NTSC: 23.97
PAL: 25
Film: 24
Music: 30
,◉When changing the Session Start time, what happens to existing audio
in your session when you choose the option Maintain Relative Position?
Answer: a global offset will be applied to all clips placed in the session
such that all clips remain the same position relative to the previous
Session Start time.
◉What Location options are available in the Video Import Options
window? Answer: Session Start, Song Start, Selection, Spot, and
Original Time Stamp (Avid Video Only)
◉What is the Video Engine Rate? Answer: The Video Engine Rate is
determined by the frame rate of the first video clip added to the session,
and it is the rate that the video plays back at. You must set Pro Tools to
be at the same rate by changing your seession timecode rate to match.
◉Where is the Video Engine Rate listed? Answer: under the track name
of the main video track
◉What two different video display options are available on the video
track in the Edit window? Answer: Frames view and Blocks view. could
use block view because frames view might take a high video demand on
the system (really? LOL, probably not though)
◉How can you tell if a video track is online or offline? Answer: Online
and the Video online button (icon with "0" in the track header) will be
blue. Offline, it will be grey.
, ◉How can you toggle a Video Online? Answer: either Options > Video
Online or CMD+Shift+J
◉How can an Avid video track be distinguished from a QuickTime
video track? Answer: There will be an Avid icon 'A' or a Quicktime Icon
(Q) in the track header.
◉Can you have both Avid and Quicktime video files on the same video
track? Answer: You can have multiple video files on the same video
track but they must be of the same video type (Avid or Quicktime, but
not both)
◉How can a video track be locked and unlocked? Answer: Select the
video track and right click the nameplate, selecting/deselecting
LOCKED.
◉How can the Video window be displayed and resized? Answer:
Window > Video or press CMD+[9] on the numeric keypad to display
the Video window. You can resize the Video window by dragging or
right clicking and choosing between half size, actual size, double size, or
fit screen.
◉How can you enable scrubbing in the Video window? Answer:
Options > Scrub in Video Window
COMPLETE QUESTIONS AND CORRECT
VERIFIED ANSWERS ALREADY GRADED A+
100% GUARANTEED TO PASS CONCEPTS
◉What is the name of the connector on both the SYNC HD and SYNC
I/O that is used to connect blackburst or house sync? Answer: Video Ref
In port
◉What is the name of the connector on both the SYNC HD and SYNC
I/O that woudl be used to distribute a common clock to multiple HD-
series audio interfaces? Answer: With Loop Sync you can connect all
Avid Peripherals in a closed loop allowing any peripheral to be the clock
master source for the entire system, without requiring any re-cabling.
◉List the most commonly used timecode frame rates for each of the
following: NTSC, PAL, Film, Music? Answer: NTSC: 23.97
PAL: 25
Film: 24
Music: 30
,◉When changing the Session Start time, what happens to existing audio
in your session when you choose the option Maintain Relative Position?
Answer: a global offset will be applied to all clips placed in the session
such that all clips remain the same position relative to the previous
Session Start time.
◉What Location options are available in the Video Import Options
window? Answer: Session Start, Song Start, Selection, Spot, and
Original Time Stamp (Avid Video Only)
◉What is the Video Engine Rate? Answer: The Video Engine Rate is
determined by the frame rate of the first video clip added to the session,
and it is the rate that the video plays back at. You must set Pro Tools to
be at the same rate by changing your seession timecode rate to match.
◉Where is the Video Engine Rate listed? Answer: under the track name
of the main video track
◉What two different video display options are available on the video
track in the Edit window? Answer: Frames view and Blocks view. could
use block view because frames view might take a high video demand on
the system (really? LOL, probably not though)
◉How can you tell if a video track is online or offline? Answer: Online
and the Video online button (icon with "0" in the track header) will be
blue. Offline, it will be grey.
, ◉How can you toggle a Video Online? Answer: either Options > Video
Online or CMD+Shift+J
◉How can an Avid video track be distinguished from a QuickTime
video track? Answer: There will be an Avid icon 'A' or a Quicktime Icon
(Q) in the track header.
◉Can you have both Avid and Quicktime video files on the same video
track? Answer: You can have multiple video files on the same video
track but they must be of the same video type (Avid or Quicktime, but
not both)
◉How can a video track be locked and unlocked? Answer: Select the
video track and right click the nameplate, selecting/deselecting
LOCKED.
◉How can the Video window be displayed and resized? Answer:
Window > Video or press CMD+[9] on the numeric keypad to display
the Video window. You can resize the Video window by dragging or
right clicking and choosing between half size, actual size, double size, or
fit screen.
◉How can you enable scrubbing in the Video window? Answer:
Options > Scrub in Video Window
