FDNY G60 Latest 2025 Practice Test Questions WITH CORRECT AND VERIFIED ANSWERS
LATEST 2025
Sprinkler system must NOT be shut off or impaired while hot work is performed -CORRECT
ANSWER-Place damp cloth guards on individual sprinkler heads
The person conducting the fire watch ______ have other duties -CORRECT ANSWER-
CANNOT
A portable fire extinguisher with a rating of _________ is required and should be within
____ feet travel distance hot work area -CORRECT ANSWER-2-A:20-B:C///30
For ROOFING OPERATIONS, a portable fire extinguisher with a minimum rating of ______ is
required -CORRECT ANSWER-3-A:40-B:C
Fire watch on floors below is ______ -CORRECT ANSWER-required
The fire watch must continue for a minimum of ____ minutes after the hot work is done -
CORRECT ANSWER-30
For any CNG or LPG torch operations, the first inspection shall be conducted ___ minutes
after completion. The second inspection shall be conducted _______ after completion of
torch operations. -CORRECT ANSWER-30 min///1 hour
The fire guard or fire watch personnel must complete a signed inspection report and it must
be submitted to and retained by the person in charge of the torch operations. -CORRECT
ANSWER-The report must be made available and maintained on the premises for a
minimum of 48 hours after the work is complete.
, Most common fuel gasses used in blowtorches are ______ -CORRECT ANSWER-LPG (butane,
propane) natural gas (methane) (either CNG or piped natural gasses)
Soldering and brazing temperatures are typically______ -CORRECT ANSWER-840 degrees F
Oxy-acetylene generates the highest temperature which can reach up to _____ -CORRECT
ANSWER-6000 degrees F
Gas torches can exceed _________ and are used for burning weeds, melting ice, or applying
tar to a roof -CORRECT ANSWER-2000 degrees F
If the torch operation is to stop for a period of _________________, the torch vale must be
closed and the gas supply to the torch must be completely shut -CORRECT ANSWER-1 hour
or more
Containers, valves, regulators, hose and other apparatus and fittings for oxygen must be kept
free of __________. -CORRECT ANSWER-oil or grease
Backfire -CORRECT ANSWER-this occurs when the flame of a torch goes out and there is a
loud snap or pop
Flashback -CORRECT ANSWER-This occurs when the cutting or welding flame burns inside
the torch or the hoses and it is usually accompanied by a whistle or hissing noise. As soon as
it is noticed, the torch control valves should be closed. This indicated there is something
wrong with the equipment, either damage or blockage
A hot work area should be _____ -CORRECT ANSWER-well ventilated
Whoever is working with hot work equipment CANNOT wear _____________ since it is
susceptible to burning and ignition -CORRECT ANSWER-frayed clothing
LATEST 2025
Sprinkler system must NOT be shut off or impaired while hot work is performed -CORRECT
ANSWER-Place damp cloth guards on individual sprinkler heads
The person conducting the fire watch ______ have other duties -CORRECT ANSWER-
CANNOT
A portable fire extinguisher with a rating of _________ is required and should be within
____ feet travel distance hot work area -CORRECT ANSWER-2-A:20-B:C///30
For ROOFING OPERATIONS, a portable fire extinguisher with a minimum rating of ______ is
required -CORRECT ANSWER-3-A:40-B:C
Fire watch on floors below is ______ -CORRECT ANSWER-required
The fire watch must continue for a minimum of ____ minutes after the hot work is done -
CORRECT ANSWER-30
For any CNG or LPG torch operations, the first inspection shall be conducted ___ minutes
after completion. The second inspection shall be conducted _______ after completion of
torch operations. -CORRECT ANSWER-30 min///1 hour
The fire guard or fire watch personnel must complete a signed inspection report and it must
be submitted to and retained by the person in charge of the torch operations. -CORRECT
ANSWER-The report must be made available and maintained on the premises for a
minimum of 48 hours after the work is complete.
, Most common fuel gasses used in blowtorches are ______ -CORRECT ANSWER-LPG (butane,
propane) natural gas (methane) (either CNG or piped natural gasses)
Soldering and brazing temperatures are typically______ -CORRECT ANSWER-840 degrees F
Oxy-acetylene generates the highest temperature which can reach up to _____ -CORRECT
ANSWER-6000 degrees F
Gas torches can exceed _________ and are used for burning weeds, melting ice, or applying
tar to a roof -CORRECT ANSWER-2000 degrees F
If the torch operation is to stop for a period of _________________, the torch vale must be
closed and the gas supply to the torch must be completely shut -CORRECT ANSWER-1 hour
or more
Containers, valves, regulators, hose and other apparatus and fittings for oxygen must be kept
free of __________. -CORRECT ANSWER-oil or grease
Backfire -CORRECT ANSWER-this occurs when the flame of a torch goes out and there is a
loud snap or pop
Flashback -CORRECT ANSWER-This occurs when the cutting or welding flame burns inside
the torch or the hoses and it is usually accompanied by a whistle or hissing noise. As soon as
it is noticed, the torch control valves should be closed. This indicated there is something
wrong with the equipment, either damage or blockage
A hot work area should be _____ -CORRECT ANSWER-well ventilated
Whoever is working with hot work equipment CANNOT wear _____________ since it is
susceptible to burning and ignition -CORRECT ANSWER-frayed clothing
