ICC Tank Tightness Testing - Questions With
Expert Insights
Save
Terms in this set (73)
Which is not a valid type Ballast 2 multiple choice options
of stage II vapor
recovery?
A person possessing the appropriate contractor
The Annual Monitor
license AND an individual trained and certified by
Certification must be
the manufacturer of the monitoring equipment
performed by
3 multiple choice options
When performing All 3 multiple choice options
secondary containment
testing, what gets tested?
According to the Health All 3 multiple choice options
and Safety Code; tanks
installed after July 1, 2003
require a on-time test at
installation to determine
that the tank is product
tight. Acceptable test
methods are:
A _____________ is an Bond 3 multiple choice options
electrical connection
between two or more
conductive objects such
that they are at the same
electrical potential.
, If dispatched in response A tank integrity test 1 multiple choice option
to a statistical inventory
reconciliation invalid
result call, what should
be the last thing
performed?
Automatic line leak 3, 10 3 multiple choice options
detector must be
replaced if they fail a ____
GPH at _____ PSI test.
Which is the most Gasoline 3 multiple choice options
hazardous of the
petroleum products?
An automatic tank gauge Single Wall Tanks 3 multiple choice options
can fulfill the leak
detector requirement in
California for what
situation?
When monitoring a LEL 1 multiple choice option
confined space which
level of combustible gas
should you monitor for?
The following is true of None of the above. 3 multiple choice options
impressed current
cathodic systems:
By definition an The tank and all connected piping.
"Underground Storage
3 multiple choice options
Tank" includes:
Expert Insights
Save
Terms in this set (73)
Which is not a valid type Ballast 2 multiple choice options
of stage II vapor
recovery?
A person possessing the appropriate contractor
The Annual Monitor
license AND an individual trained and certified by
Certification must be
the manufacturer of the monitoring equipment
performed by
3 multiple choice options
When performing All 3 multiple choice options
secondary containment
testing, what gets tested?
According to the Health All 3 multiple choice options
and Safety Code; tanks
installed after July 1, 2003
require a on-time test at
installation to determine
that the tank is product
tight. Acceptable test
methods are:
A _____________ is an Bond 3 multiple choice options
electrical connection
between two or more
conductive objects such
that they are at the same
electrical potential.
, If dispatched in response A tank integrity test 1 multiple choice option
to a statistical inventory
reconciliation invalid
result call, what should
be the last thing
performed?
Automatic line leak 3, 10 3 multiple choice options
detector must be
replaced if they fail a ____
GPH at _____ PSI test.
Which is the most Gasoline 3 multiple choice options
hazardous of the
petroleum products?
An automatic tank gauge Single Wall Tanks 3 multiple choice options
can fulfill the leak
detector requirement in
California for what
situation?
When monitoring a LEL 1 multiple choice option
confined space which
level of combustible gas
should you monitor for?
The following is true of None of the above. 3 multiple choice options
impressed current
cathodic systems:
By definition an The tank and all connected piping.
"Underground Storage
3 multiple choice options
Tank" includes:
