1
For Expert help and assignment solutions, +254707240657
Nj Boat Certificate Questions and Answers
(100% Correct Answers) Already Graded
A+
The port side of a vessel is the.... side —ANS: Left
The stern of a vessel is the... of the vessel —ANS: Rear
Basic types of vessel hulls can be described as:
© 2025 Assignment Expert
a. moving and non moving
b. displacement and planting
c. rough and smooth
Guru01 - Stuvia
d. narrow and wide —ANS: b. displacement and planing
Name three basic hull shapes —ANS: i. Round bottom
ii. flat bottom
iii. Vee bottom
What are the four length classes of vessels —ANS: i. Less than 16
feet
ii. 16 to less than 26 feet
iii. 26 to less than 40 feet
iv. 40 to less than 65 feet
List the four basic types of engines —ANS: i. outboard
ii. inboard
iii. stern drive
iv. jet drive
Stern drive and inboard engine are:
a. marinized outboard engines
b. specially designed and built engines
, 2
For Expert help and assignment solutions, +254707240657
c. automotive engines and adapted for marine use
d. jet drive engines —ANS: c. automotive engines adapted for
marine use
The U.S. Coast Guard considers personal watercraft to be... —
ANS: inboard vessels
True or false : Personal watercraft are not subject to the laws and
requirements of other vessels —ANS: False
An... is a device used to pump and force water under pressure
through a steering nozzle at the rear of the vessel. —ANS: impeller
What information is displayed on the capacity plate of an
outboard powerboat? (2 things) —ANS: i. capacity in pounds or
© 2025 Assignment Expert
number of people
ii. recommended maximum horsepower
List three things that should be included on your float plan before
Guru01 - Stuvia
you embark on an extended outing —ANS: i. Vessel's description:
give number, size, make, etc
ii. Number, names, and addresses of passengers
iii. trip plan
Name three things that you should do while filling the fuel tank of
your vessel —ANS: i. keep the nozzle in contact with the tank
opening
ii. fill tank slowly and avoid spilling
iii. Never fill to the brim
A rule of thumb to prevent running out of fuel on a PWC is ... out,
... in, and ... in reserve —ANS: 1/3 out, 1/3 in, and 1/3 in reserve
"Tongue weight" is the amount of the loaded trailer's weight that...
—ANS: presses down on the towing hitch
Two strong safety chains should be... to support the trailer's
coupler in case it becomes disconnected from the towing vehicle
—ANS: crisscrossed
For Expert help and assignment solutions, +254707240657
Nj Boat Certificate Questions and Answers
(100% Correct Answers) Already Graded
A+
The port side of a vessel is the.... side —ANS: Left
The stern of a vessel is the... of the vessel —ANS: Rear
Basic types of vessel hulls can be described as:
© 2025 Assignment Expert
a. moving and non moving
b. displacement and planting
c. rough and smooth
Guru01 - Stuvia
d. narrow and wide —ANS: b. displacement and planing
Name three basic hull shapes —ANS: i. Round bottom
ii. flat bottom
iii. Vee bottom
What are the four length classes of vessels —ANS: i. Less than 16
feet
ii. 16 to less than 26 feet
iii. 26 to less than 40 feet
iv. 40 to less than 65 feet
List the four basic types of engines —ANS: i. outboard
ii. inboard
iii. stern drive
iv. jet drive
Stern drive and inboard engine are:
a. marinized outboard engines
b. specially designed and built engines
, 2
For Expert help and assignment solutions, +254707240657
c. automotive engines and adapted for marine use
d. jet drive engines —ANS: c. automotive engines adapted for
marine use
The U.S. Coast Guard considers personal watercraft to be... —
ANS: inboard vessels
True or false : Personal watercraft are not subject to the laws and
requirements of other vessels —ANS: False
An... is a device used to pump and force water under pressure
through a steering nozzle at the rear of the vessel. —ANS: impeller
What information is displayed on the capacity plate of an
outboard powerboat? (2 things) —ANS: i. capacity in pounds or
© 2025 Assignment Expert
number of people
ii. recommended maximum horsepower
List three things that should be included on your float plan before
Guru01 - Stuvia
you embark on an extended outing —ANS: i. Vessel's description:
give number, size, make, etc
ii. Number, names, and addresses of passengers
iii. trip plan
Name three things that you should do while filling the fuel tank of
your vessel —ANS: i. keep the nozzle in contact with the tank
opening
ii. fill tank slowly and avoid spilling
iii. Never fill to the brim
A rule of thumb to prevent running out of fuel on a PWC is ... out,
... in, and ... in reserve —ANS: 1/3 out, 1/3 in, and 1/3 in reserve
"Tongue weight" is the amount of the loaded trailer's weight that...
—ANS: presses down on the towing hitch
Two strong safety chains should be... to support the trailer's
coupler in case it becomes disconnected from the towing vehicle
—ANS: crisscrossed
