AFAB 120 Final Exam – Questions With Correct
Solutions
Save
Practice questions for this set
Learn 1 /7 Study with Learn
all of the above
Choose an answer
The purpose of applying insulation blankets are used to
1 mechanical pressure is to remove 2 minimize the amount heat loss of
excess resin from the components. during the curing process
--- is primarily used during the
which of the following is a vacuum vacuum bagging process to
3 4
bag material remove excess resin into the
bleeder.
Don't know?
Terms in this set (80)
, The purpose of applying True
mechanical pressure is to
remove excess resin from
the components.
Clecos are used in Caul plates
conjunction with --- to
apply pressure to the
repair.
What type of bagging Surface Bagging
process is used on larger
surfaces.
The purpose of applying True
mechanical pressure is to
hold the repair securely
and prevent any shifting
of the patches during the
curing process.
--- is primarily used Peel Ply
during the vacuum
bagging process to
remove excess resin into
the bleeder.
what care should be internal and external bagging to prevent collapsing.
taken when using self-
enclosed bagging when
parts are hollow.
a vacuum leak check is True
done to make sure the
bag is sealed properly
after vacuum is drawn on 2 minutes
the part the vacuum hose
is disconnected for how
many minutes
Solutions
Save
Practice questions for this set
Learn 1 /7 Study with Learn
all of the above
Choose an answer
The purpose of applying insulation blankets are used to
1 mechanical pressure is to remove 2 minimize the amount heat loss of
excess resin from the components. during the curing process
--- is primarily used during the
which of the following is a vacuum vacuum bagging process to
3 4
bag material remove excess resin into the
bleeder.
Don't know?
Terms in this set (80)
, The purpose of applying True
mechanical pressure is to
remove excess resin from
the components.
Clecos are used in Caul plates
conjunction with --- to
apply pressure to the
repair.
What type of bagging Surface Bagging
process is used on larger
surfaces.
The purpose of applying True
mechanical pressure is to
hold the repair securely
and prevent any shifting
of the patches during the
curing process.
--- is primarily used Peel Ply
during the vacuum
bagging process to
remove excess resin into
the bleeder.
what care should be internal and external bagging to prevent collapsing.
taken when using self-
enclosed bagging when
parts are hollow.
a vacuum leak check is True
done to make sure the
bag is sealed properly
after vacuum is drawn on 2 minutes
the part the vacuum hose
is disconnected for how
many minutes
