Firefighting Final Exam 2025/2026 Exam
Questions and Detailed Answers | Get it
100% Correct Answers
All PPE designed for structural fire fighting must meet the requirements of -
🧠 ANSWER ✔✔NFPA 1971
Which piece of PPE is donned under the helmet and is designed to protect
the neck, ears, and face from exposure to heat, embers, and debris? - 🧠
ANSWER ✔✔Protective hood
Which statement about structural fire fighting protective coats is accurate? -
🧠 ANSWER ✔✔The outer shell, moisture barrier, and thermal barrier must
always be worn together.
Protective trousers designed for fire fighting are: - 🧠 ANSWER
✔✔constructed from the same fabric, moisture barrier, and thermal layering
used in protective coats.
,When properly worn, fire fighting gloves: - 🧠 ANSWER ✔✔must completely
cover the wristlet of the protective coat.
Personal alert safety system (PASS) alarms are designed to activate when
- 🧠 ANSWER ✔✔a firefighter is motionless for more than 30 seconds.
What should be done during routine inspections of PPE, such as after use
at an incident? - 🧠 ANSWER ✔✔Look for damage like rips or tears
SCBA can help protect from _____, which can be caused by inhaling
heated gases. - 🧠 ANSWER ✔✔asphyxiation
The SCBA backplate and harness assembly: - 🧠 ANSWER ✔✔is used to
hold the breathing air cylinder.
Immediately prior to donning SCBA, firefighters should: - 🧠 ANSWER
✔✔check the cylinder gauge to make sure the cylinder is full.
By which mechanism of heat transfer does heat travel in a straight line at
the speed of light, allowing heat to travel through vacuums and air spaces?
- 🧠 ANSWER ✔✔Radiation
, Which of the following terms is used to refer to the process that can
generate sufficient quantities of burnable vapors to ignite in the presence of
a sufficient oxidizer? - 🧠 ANSWER ✔✔Pyrolysis
What is the most common method used in fire fighting operations? - 🧠
ANSWER ✔✔Temperature reduction
Fires develop through four stages: incipient, growth, _____, and decay. - 🧠
ANSWER ✔✔fully-developed
Which type of phenomenon occurs when the fire rapidly transitions from the
growth stage to the fully developed stage? - 🧠 ANSWER ✔✔Flashover
Which hazard is unique to metal vessels? - 🧠 ANSWER ✔✔Metal hulls and
superstructures promote heat conduction, resulting in hot steel decks that
can melt boots and burn personnel.
When solid fuels are heated, they begin to _____ and release fuel gases
and vapors. - 🧠 ANSWER ✔✔pyrolize
A fire is said to be in the _____ stage when it runs out of either available
fuel or available oxygen. - 🧠 ANSWER ✔✔decay
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
STATEMENT. ALL RIGHTS RESERVED
3
Questions and Detailed Answers | Get it
100% Correct Answers
All PPE designed for structural fire fighting must meet the requirements of -
🧠 ANSWER ✔✔NFPA 1971
Which piece of PPE is donned under the helmet and is designed to protect
the neck, ears, and face from exposure to heat, embers, and debris? - 🧠
ANSWER ✔✔Protective hood
Which statement about structural fire fighting protective coats is accurate? -
🧠 ANSWER ✔✔The outer shell, moisture barrier, and thermal barrier must
always be worn together.
Protective trousers designed for fire fighting are: - 🧠 ANSWER
✔✔constructed from the same fabric, moisture barrier, and thermal layering
used in protective coats.
,When properly worn, fire fighting gloves: - 🧠 ANSWER ✔✔must completely
cover the wristlet of the protective coat.
Personal alert safety system (PASS) alarms are designed to activate when
- 🧠 ANSWER ✔✔a firefighter is motionless for more than 30 seconds.
What should be done during routine inspections of PPE, such as after use
at an incident? - 🧠 ANSWER ✔✔Look for damage like rips or tears
SCBA can help protect from _____, which can be caused by inhaling
heated gases. - 🧠 ANSWER ✔✔asphyxiation
The SCBA backplate and harness assembly: - 🧠 ANSWER ✔✔is used to
hold the breathing air cylinder.
Immediately prior to donning SCBA, firefighters should: - 🧠 ANSWER
✔✔check the cylinder gauge to make sure the cylinder is full.
By which mechanism of heat transfer does heat travel in a straight line at
the speed of light, allowing heat to travel through vacuums and air spaces?
- 🧠 ANSWER ✔✔Radiation
, Which of the following terms is used to refer to the process that can
generate sufficient quantities of burnable vapors to ignite in the presence of
a sufficient oxidizer? - 🧠 ANSWER ✔✔Pyrolysis
What is the most common method used in fire fighting operations? - 🧠
ANSWER ✔✔Temperature reduction
Fires develop through four stages: incipient, growth, _____, and decay. - 🧠
ANSWER ✔✔fully-developed
Which type of phenomenon occurs when the fire rapidly transitions from the
growth stage to the fully developed stage? - 🧠 ANSWER ✔✔Flashover
Which hazard is unique to metal vessels? - 🧠 ANSWER ✔✔Metal hulls and
superstructures promote heat conduction, resulting in hot steel decks that
can melt boots and burn personnel.
When solid fuels are heated, they begin to _____ and release fuel gases
and vapors. - 🧠 ANSWER ✔✔pyrolize
A fire is said to be in the _____ stage when it runs out of either available
fuel or available oxygen. - 🧠 ANSWER ✔✔decay
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
STATEMENT. ALL RIGHTS RESERVED
3
