Page 1 of 29
BCSP STSC ALL Questions and Verified Solutions
Latest Update This Year
The time-weighted average noise threshold above which protective measures must be taken
is _______ dB
90
During an inspection of a powered rotary saw, which of the following should be noted as a
hazard, requiring the tool to be removed from service?
The guard is removed.
According to the OSHA reporting standard, how soon must a fatal workplace accident be
reported?
within 8 hours of the occurrence
What is the primary hazard associated with using a portable space heater while applying
spray adhesive?
fire caused by the presence of an ignition source near a fuel
What is the primary goal of a job hazard analysis?
to proactively modify a job to prevent injuries
, Page 2 of 29
The specific emergency equipment required at a job site will depend on the _______and
the_____
work, environment
Who is responsible for reviewing and authorizing a confined space entry permit, if trained
properly?
an entry supervisor
Which of the following is NOT appropriate to use as a sling for hoisting materials?
leather straps
What is the most appropriate type of fire extinguisher to have at a construction site based on
fuel types?
ABC
What are the three elements of the fire triangle?
oxygen, heat, fuel
According to OSHA, how long in any one day can a worker be exposed to a noise level of 102
DBA without hearing protection?
90 minutes
Which of the followins is NOT a step when conducting a job hazard analysis?
begin an analysis as soon as an injury occurs
, Page 3 of 29
A company is working on replacing sewer lines under the concrete floor of a warehouse.
The safety officer measures the time-weighted average noise level during demolition at 120
dBA. Would earplugs with a noise reduction rating of 30 dBA be appropriate protection?
yes, but only if coupled with other controls
To reduce the struck-by hazard associated with working near heavy equipment, individual
workers should wear the following?
high-visibility clothing
Which one of the following properties would reclassify a confined space as a permit-required
confined space?
sloping floor tapering to a smaller cross-section
A certain project involves several welders throughout the duration of the build. The closest
medical facility is a day clinic. What should the superintendent do?
communicate with the facility regarding their procedure for treating serious burns
Which of the following activities requires a permit issued by a competent person?
entering a below-grade utility vault for repair work
A safety professional who always wears protective equipment, follows safety practices,
enforces rules equally regardless of the individual, and listens to suggestions from workers is
creating a safety culture by way ____________.
Leadership
BCSP STSC ALL Questions and Verified Solutions
Latest Update This Year
The time-weighted average noise threshold above which protective measures must be taken
is _______ dB
90
During an inspection of a powered rotary saw, which of the following should be noted as a
hazard, requiring the tool to be removed from service?
The guard is removed.
According to the OSHA reporting standard, how soon must a fatal workplace accident be
reported?
within 8 hours of the occurrence
What is the primary hazard associated with using a portable space heater while applying
spray adhesive?
fire caused by the presence of an ignition source near a fuel
What is the primary goal of a job hazard analysis?
to proactively modify a job to prevent injuries
, Page 2 of 29
The specific emergency equipment required at a job site will depend on the _______and
the_____
work, environment
Who is responsible for reviewing and authorizing a confined space entry permit, if trained
properly?
an entry supervisor
Which of the following is NOT appropriate to use as a sling for hoisting materials?
leather straps
What is the most appropriate type of fire extinguisher to have at a construction site based on
fuel types?
ABC
What are the three elements of the fire triangle?
oxygen, heat, fuel
According to OSHA, how long in any one day can a worker be exposed to a noise level of 102
DBA without hearing protection?
90 minutes
Which of the followins is NOT a step when conducting a job hazard analysis?
begin an analysis as soon as an injury occurs
, Page 3 of 29
A company is working on replacing sewer lines under the concrete floor of a warehouse.
The safety officer measures the time-weighted average noise level during demolition at 120
dBA. Would earplugs with a noise reduction rating of 30 dBA be appropriate protection?
yes, but only if coupled with other controls
To reduce the struck-by hazard associated with working near heavy equipment, individual
workers should wear the following?
high-visibility clothing
Which one of the following properties would reclassify a confined space as a permit-required
confined space?
sloping floor tapering to a smaller cross-section
A certain project involves several welders throughout the duration of the build. The closest
medical facility is a day clinic. What should the superintendent do?
communicate with the facility regarding their procedure for treating serious burns
Which of the following activities requires a permit issued by a competent person?
entering a below-grade utility vault for repair work
A safety professional who always wears protective equipment, follows safety practices,
enforces rules equally regardless of the individual, and listens to suggestions from workers is
creating a safety culture by way ____________.
Leadership
