AFAB Study Guide Questions With Complete Solutions
A ____ dimension features a numeric value used to describe the
theoretical exact size or location in GD&T. Correct Answer
basic
A double layer feature control frame is used for a ____ tolerance
Correct Answer composite
A geometric tolerance that can be measured with a dial indicator
to determine the variation of surface points as the part is rotated
about a datum axis is ____. Correct Answer runout
A local note may use a ____ that associates the indicated feature
to one of the numbered general notes. Correct Answer flag
A number under the horizontal bar on the right side of the check
mark symbol specifies the ____. Correct Answer sampling
length
A pattern of ridges and grooves cut into a cylindrical surface for
the purpose of providing a grip is called a Correct Answer
knurl
American threads are specified by the number of threads per
inch. If there are 12 threads per inch, then the pitch is ____.
Correct Answer .083
Any auxiliary view projected from the front view could be
called a ____ auxiliary Correct Answer depth
A ____ dimension features a numeric value used to describe the
theoretical exact size or location in GD&T. Correct Answer
basic
A double layer feature control frame is used for a ____ tolerance
Correct Answer composite
A geometric tolerance that can be measured with a dial indicator
to determine the variation of surface points as the part is rotated
about a datum axis is ____. Correct Answer runout
A local note may use a ____ that associates the indicated feature
to one of the numbered general notes. Correct Answer flag
A number under the horizontal bar on the right side of the check
mark symbol specifies the ____. Correct Answer sampling
length
A pattern of ridges and grooves cut into a cylindrical surface for
the purpose of providing a grip is called a Correct Answer
knurl
American threads are specified by the number of threads per
inch. If there are 12 threads per inch, then the pitch is ____.
Correct Answer .083
Any auxiliary view projected from the front view could be
called a ____ auxiliary Correct Answer depth
