OSHA 511 CERTIFICATION EXAM WITH ALL CORRECT &
100% VERIFIED ANSWERS|ALREADY GRADED A+|
LATEST VERSION
When you have injury and/or illness in the workplace what can occur: ✔Correct Answer-o Lost
time
o Lower moral
o Lower customer relations
o increase cost to train the workers
o Higher employee turnover
OSHA's mission: ✔Correct Answer-o Protect safety and health of American workers
What is the common name for when workers seek safety and health rights and don't want to be
prosecuted for them: ✔Correct Answer-o Whistle blower act
o OSHAct 11C
o "someone who informs the authorities about a person or organization engaged in illegal or
unacceptable behavior"
o protect employees from employer retaliation, such as dismissal, discipline, harassment, and
demotion
General duty clause: ✔Correct Answer-o OSHAct 5a
o workplace should be free of general hazards
What is a horizontal standard (general): ✔Correct Answer-Applies to multiple industries (not
covered by specific industry standard)
What is vertical standard: ✔Correct Answer-o Specific to industry
o Examples: Sawmills, logging operations, pulp paper, and paperboard mills
Purpose of OSHA directives (directions): ✔Correct Answer-o procedures for inspections given to
osha compliance officers
o provide consistent enforcement of osha inspections
o CPL = enforcement compliance directives (part of osha directives)
When does OSHA require abetments to be complete: ✔Correct Answer-o The employer must
submit an abatement plan for each cited violation within 25 calendar days from the final order date
when the citation indicates that such a plan is required
o Certification of abatement must occur within 10 calendar days of the completion of the abatement
action
o abatements correction of violations
What are multiple employee work site: ✔Correct Answer-o More than one company working
o Example: General contractor that contracts plumbing to a plumbing contractor
When looking at multi-employer worksites ask: ✔Correct Answer-o -creating entity (who is
creating the hazards)
o -exposing entity (who is exposed to the hazard)
, o -correcting entity (who has informed others and/or fixed or set up precautions for the hazard)
o Example: if you have a fall hazard, who created the fall hazard? Who is creating? Who is exposing?
o Inform others of the hazard if you have created the hazard
OSHA shows up at workplace: ✔Correct Answer-o Show credentials
o Opening conference
o Inspection walk around
o Closing conference (citations are discussed but not given until up to 6 months through the mail)
What are examples of restricted work activity: ✔Correct Answer-o Job transfer --- transfer to
different job
o Limited duty --- only work partial shift
o Limited ability --- Can't stand longer than two hours (work restriction)
OSHA record keeping incident rate (how they calculate it): ✔Correct Answer-o The number of
recordable injuries and illnesses per 100 full time workers per year
How can management show commitment to safety: ✔Correct Answer-o Lead by example
o Implement training and resources
o Follow rules and know the rules
What are some ways that you can have a proactive approach to the workplace with policies and
procedures: ✔Correct Answer-o Employee involvement
o JSA
o Housekeeping
o Review training and rules/policies
o Identify areas that need improvement
o Periodic inspections/reviews before something happens vs after
What is walking working surfaces in CFR: ✔Correct Answer-o 1910 Subpart D
OSHA's definition of a hole: ✔Correct Answer-o 1910.21
o Hole means a gap or open space in a floor, roof, horizontal walking-working surface, or similar
surface that is at least 2 inches (5 cm) in its least dimension
Know difference between hole vs opening: ✔Correct Answer-o Hole means a gap or open space in
a floor, roof, horizontal walking-working surface, or similar surface that is at least 2 inches (5 cm) in
its least dimension
o Opening means a gap or open space in a wall, partition, vertical walking-working surface, or similar
surface that is at least 30 inches (76 cm) high and at least 18 inches (46 cm) wide, through which an
employee can fall to a lower level
Walking working surfaces applies when: ✔Correct Answer-o 4 feet high
ONLY fixed ladder 24 feet or more: ✔Correct Answer-o Ladder safety system/device (vertical
lifeline system on a ladder)
Emergencies and evacuation important thing to consider with egress (exit routes): ✔Correct
Answer-o Free and clear
o Visible
o At least 2 exit routes or what's adequate
100% VERIFIED ANSWERS|ALREADY GRADED A+|
LATEST VERSION
When you have injury and/or illness in the workplace what can occur: ✔Correct Answer-o Lost
time
o Lower moral
o Lower customer relations
o increase cost to train the workers
o Higher employee turnover
OSHA's mission: ✔Correct Answer-o Protect safety and health of American workers
What is the common name for when workers seek safety and health rights and don't want to be
prosecuted for them: ✔Correct Answer-o Whistle blower act
o OSHAct 11C
o "someone who informs the authorities about a person or organization engaged in illegal or
unacceptable behavior"
o protect employees from employer retaliation, such as dismissal, discipline, harassment, and
demotion
General duty clause: ✔Correct Answer-o OSHAct 5a
o workplace should be free of general hazards
What is a horizontal standard (general): ✔Correct Answer-Applies to multiple industries (not
covered by specific industry standard)
What is vertical standard: ✔Correct Answer-o Specific to industry
o Examples: Sawmills, logging operations, pulp paper, and paperboard mills
Purpose of OSHA directives (directions): ✔Correct Answer-o procedures for inspections given to
osha compliance officers
o provide consistent enforcement of osha inspections
o CPL = enforcement compliance directives (part of osha directives)
When does OSHA require abetments to be complete: ✔Correct Answer-o The employer must
submit an abatement plan for each cited violation within 25 calendar days from the final order date
when the citation indicates that such a plan is required
o Certification of abatement must occur within 10 calendar days of the completion of the abatement
action
o abatements correction of violations
What are multiple employee work site: ✔Correct Answer-o More than one company working
o Example: General contractor that contracts plumbing to a plumbing contractor
When looking at multi-employer worksites ask: ✔Correct Answer-o -creating entity (who is
creating the hazards)
o -exposing entity (who is exposed to the hazard)
, o -correcting entity (who has informed others and/or fixed or set up precautions for the hazard)
o Example: if you have a fall hazard, who created the fall hazard? Who is creating? Who is exposing?
o Inform others of the hazard if you have created the hazard
OSHA shows up at workplace: ✔Correct Answer-o Show credentials
o Opening conference
o Inspection walk around
o Closing conference (citations are discussed but not given until up to 6 months through the mail)
What are examples of restricted work activity: ✔Correct Answer-o Job transfer --- transfer to
different job
o Limited duty --- only work partial shift
o Limited ability --- Can't stand longer than two hours (work restriction)
OSHA record keeping incident rate (how they calculate it): ✔Correct Answer-o The number of
recordable injuries and illnesses per 100 full time workers per year
How can management show commitment to safety: ✔Correct Answer-o Lead by example
o Implement training and resources
o Follow rules and know the rules
What are some ways that you can have a proactive approach to the workplace with policies and
procedures: ✔Correct Answer-o Employee involvement
o JSA
o Housekeeping
o Review training and rules/policies
o Identify areas that need improvement
o Periodic inspections/reviews before something happens vs after
What is walking working surfaces in CFR: ✔Correct Answer-o 1910 Subpart D
OSHA's definition of a hole: ✔Correct Answer-o 1910.21
o Hole means a gap or open space in a floor, roof, horizontal walking-working surface, or similar
surface that is at least 2 inches (5 cm) in its least dimension
Know difference between hole vs opening: ✔Correct Answer-o Hole means a gap or open space in
a floor, roof, horizontal walking-working surface, or similar surface that is at least 2 inches (5 cm) in
its least dimension
o Opening means a gap or open space in a wall, partition, vertical walking-working surface, or similar
surface that is at least 30 inches (76 cm) high and at least 18 inches (46 cm) wide, through which an
employee can fall to a lower level
Walking working surfaces applies when: ✔Correct Answer-o 4 feet high
ONLY fixed ladder 24 feet or more: ✔Correct Answer-o Ladder safety system/device (vertical
lifeline system on a ladder)
Emergencies and evacuation important thing to consider with egress (exit routes): ✔Correct
Answer-o Free and clear
o Visible
o At least 2 exit routes or what's adequate
