AutoCAD Certification Exam
Questions With All Correct Answers
2025 Latest Update!!!
By default, AutoCAD has the following workspaces. CORRECT ANSWERS - 2D
Drafting & Annotation
- 3D Modeling
- AutoCAD Classic
Object snap tracking works in combination with object snaps to enable you to
temporarily acquire & track up to how many points? CORRECT ANSWERS Seven
Which of the following settings can be made for polar tracking? CORRECT ANSWERS -
Increment Angle
- Additional Angles
If you need the text to be reversed, when you mirror the text, then you need to set:
CORRECT ANSWERS MIRRTEXT TO 1
By selecting which one of the following, the objects on the layer are not visible and are
not considered when the drawing is regenerated? CORRECT ANSWERS When you
froze the layer
When you use the match properties command, you can select multiple source objects.
True/FALSE CORRECT ANSWERS False
You can set the viewport scale factor by _____________________. CORRECT
ANSWERS - Typing VSCALE
- TYPING VPSCALE
- TYPING viewportscale.
***NONE***
What happens when you set VPROTATEASSOC system variable to 0? CORRECT
ANSWERS When a viewport is rotated, the view inside is not rotated.
If you modify a dimension style, all dimensions using that style in the drawing update
automatically. CORRECT ANSWERS True
If you cannot fillet or chamfer the first segment of a polyline with the last segment of the
same polyline. true/false CORRECT ANSWERS True
Which key do you press to cycle through the available snap points? CORRECT
ANSWERS Tab
, One of the below options is wrong about type of Autocad drawing units. Which one is it?
CORRECT ANSWERS Millimeter
With a hot grip, which of these editing tasks can you perform? CORRECT ANSWERS -
Move
- Rotate
- Scale
In order to move an object, __________________________. CORRECT ANSWERS -
Select a base point followed by a point to define where the object is moving to.
- Use the displacement option.
- Select an object for grips, the move.
- ALL OF THE ABOVE.
When using copy with grips, select copy after you have selected an option, such as
move, mirror, rotate, scale, or stretch. True/False? CORRECT ANSWERS True
Using object snaps to select points for inquiry commands is critical. CORRECT
ANSWERS True
What happens if you fillet these two lines with the radius of 0? CORRECT ANSWERS
Sharp Corner
The following are some of the properties & settings that you can save in a layout, except
__________________. CORRECT ANSWERS Line weight
With the multiline text editor, you can do all of the following, except: CORRECT
ANSWERS Insert pictures
If you copy and paste text from another drawing or insert a block into a drawing that has
the same text style name with different properties, the text properties of the host
drawing will take precedence. True/False? CORRECT ANSWERS True
What is the command used to draw the above dimension line? CORRECT ANSWERS
DIMJOGLINE
The multileader's 4,8,9 represent. CORRECT ANSWERS collected multileaders
What type of island detection type is this? CORRECT ANSWERS Normal
Using the purge command, we can purge referenced blocks. CORRECT ANSWERS
False
When you explode a block, the geometry returns to its original properties. True/ False
CORRECT ANSWERS True
Questions With All Correct Answers
2025 Latest Update!!!
By default, AutoCAD has the following workspaces. CORRECT ANSWERS - 2D
Drafting & Annotation
- 3D Modeling
- AutoCAD Classic
Object snap tracking works in combination with object snaps to enable you to
temporarily acquire & track up to how many points? CORRECT ANSWERS Seven
Which of the following settings can be made for polar tracking? CORRECT ANSWERS -
Increment Angle
- Additional Angles
If you need the text to be reversed, when you mirror the text, then you need to set:
CORRECT ANSWERS MIRRTEXT TO 1
By selecting which one of the following, the objects on the layer are not visible and are
not considered when the drawing is regenerated? CORRECT ANSWERS When you
froze the layer
When you use the match properties command, you can select multiple source objects.
True/FALSE CORRECT ANSWERS False
You can set the viewport scale factor by _____________________. CORRECT
ANSWERS - Typing VSCALE
- TYPING VPSCALE
- TYPING viewportscale.
***NONE***
What happens when you set VPROTATEASSOC system variable to 0? CORRECT
ANSWERS When a viewport is rotated, the view inside is not rotated.
If you modify a dimension style, all dimensions using that style in the drawing update
automatically. CORRECT ANSWERS True
If you cannot fillet or chamfer the first segment of a polyline with the last segment of the
same polyline. true/false CORRECT ANSWERS True
Which key do you press to cycle through the available snap points? CORRECT
ANSWERS Tab
, One of the below options is wrong about type of Autocad drawing units. Which one is it?
CORRECT ANSWERS Millimeter
With a hot grip, which of these editing tasks can you perform? CORRECT ANSWERS -
Move
- Rotate
- Scale
In order to move an object, __________________________. CORRECT ANSWERS -
Select a base point followed by a point to define where the object is moving to.
- Use the displacement option.
- Select an object for grips, the move.
- ALL OF THE ABOVE.
When using copy with grips, select copy after you have selected an option, such as
move, mirror, rotate, scale, or stretch. True/False? CORRECT ANSWERS True
Using object snaps to select points for inquiry commands is critical. CORRECT
ANSWERS True
What happens if you fillet these two lines with the radius of 0? CORRECT ANSWERS
Sharp Corner
The following are some of the properties & settings that you can save in a layout, except
__________________. CORRECT ANSWERS Line weight
With the multiline text editor, you can do all of the following, except: CORRECT
ANSWERS Insert pictures
If you copy and paste text from another drawing or insert a block into a drawing that has
the same text style name with different properties, the text properties of the host
drawing will take precedence. True/False? CORRECT ANSWERS True
What is the command used to draw the above dimension line? CORRECT ANSWERS
DIMJOGLINE
The multileader's 4,8,9 represent. CORRECT ANSWERS collected multileaders
What type of island detection type is this? CORRECT ANSWERS Normal
Using the purge command, we can purge referenced blocks. CORRECT ANSWERS
False
When you explode a block, the geometry returns to its original properties. True/ False
CORRECT ANSWERS True
