CINE 202 FINAL SFSU ANALYST EXAM QUESTIONS &
DETAILED ANSWERS (A+ GRADE ACED)
How much sound is recorded on-set? (3) - CORRECT ANSWER >>>-dialogue
-room tone
-specific FX (if the environment is quiet)
What are examples of sound that can be recorded/created in post? (5) - CORRECT ANSWER
>>>-Score
-Sound FX
-Foley
-Ambience
-ADR
This comes AFTER sound design; the adjusting and coloring of sound qualities/levels so that
they create a compelling audioscape - CORRECT ANSWER >>>Sound Mix
What is a useful analogy for Sound Design vs. Sound Mix? - CORRECT ANSWER >>>Sound
Design - picking recipe/ingredients; Sound Mix - cooking
This person is the head of the sound department. They record dialogue/diegetic sound/room
tone/ambience/sound effects. They are responsible for monitoring all recordings. They advise
the Director about the quality of sound recordings on-set. - CORRECT ANSWER >>>Production
Sound Mixer
1|Page
,This person is the assistant to the Production Sound Mixer. They are responsible for microphone
placement, most commonly with a boom pole and boom mic - CORRECT ANSWER >>>Boom
Operator
This person is the assistant to the PSM and the Boom Op. They wrangle cables, set up
equipment and act as a 2nd sound mixer/boom op when needed - CORRECT ANSWER
>>>Utility Sound Technician
What are the possible sounds that are recorded on-set/on-location? (5) - CORRECT ANSWER
>>>-sync sound
-wild sound
-dialogue
-ambient sound/room tone
-clean recordings
This is sound that recorded in conjunction with the picture; the picture and the sound
correspond - CORRECT ANSWER >>>sync sound
This is sound recorded on location but not in sync with the picture - CORRECT ANSWER >>>Wild
Sound
This the term for when picture is filmed without sound recording; the sound will be
built/designed in post - CORRECT ANSWER >>>MOS
This sound system is when sound is recorded on a separate device from the camera to be
synced up in post. - CORRECT ANSWER >>>Double-System Sound
This is when sound is recorded directly onto video media via the on-board camera mic/external
mic plugged into camera - CORRECT ANSWER >>>Single-System Sound
2|Page
, Which is preferred by professionals? Double-System Sound or Single-System Sound? - CORRECT
ANSWER >>>Double-System Sound
This tool identifies production and shot information for the editor; it is used for syncing
doublesystem sound - CORRECT ANSWER >>>The Slate
This term is for how often sound waves occur - cycles per second. It is measured in hertz (Hz). -
CORRECT ANSWER >>>Frequency
Bass/low sound occurs with this type of frequency. - CORRECT ANSWER >>>Less frequency
Treble/high sound occurs with this type of frequency. - CORRECT ANSWER >>>More frequency
This is the term for the "loudness" of sound. It is measured in decibels (dB). - CORRECT
ANSWER >>>Amplitude (higher=louder)
Human hearing range in dB. - CORRECT ANSWER >>>0-120
This is the term for the unique quality of a sound irrespective of frequency and amplitude. The
"color" of the sound. (For instance, how we distinguish different instruments playing the same
note) - CORRECT ANSWER >>>Timbre/Tone
This is the number of times sound is sampled/measured per second. - CORRECT ANSWER
>>>Sample rate
This is how precise each sample is (measured in bits). - CORRECT ANSWER >>>Bit depth
3|Page
DETAILED ANSWERS (A+ GRADE ACED)
How much sound is recorded on-set? (3) - CORRECT ANSWER >>>-dialogue
-room tone
-specific FX (if the environment is quiet)
What are examples of sound that can be recorded/created in post? (5) - CORRECT ANSWER
>>>-Score
-Sound FX
-Foley
-Ambience
-ADR
This comes AFTER sound design; the adjusting and coloring of sound qualities/levels so that
they create a compelling audioscape - CORRECT ANSWER >>>Sound Mix
What is a useful analogy for Sound Design vs. Sound Mix? - CORRECT ANSWER >>>Sound
Design - picking recipe/ingredients; Sound Mix - cooking
This person is the head of the sound department. They record dialogue/diegetic sound/room
tone/ambience/sound effects. They are responsible for monitoring all recordings. They advise
the Director about the quality of sound recordings on-set. - CORRECT ANSWER >>>Production
Sound Mixer
1|Page
,This person is the assistant to the Production Sound Mixer. They are responsible for microphone
placement, most commonly with a boom pole and boom mic - CORRECT ANSWER >>>Boom
Operator
This person is the assistant to the PSM and the Boom Op. They wrangle cables, set up
equipment and act as a 2nd sound mixer/boom op when needed - CORRECT ANSWER
>>>Utility Sound Technician
What are the possible sounds that are recorded on-set/on-location? (5) - CORRECT ANSWER
>>>-sync sound
-wild sound
-dialogue
-ambient sound/room tone
-clean recordings
This is sound that recorded in conjunction with the picture; the picture and the sound
correspond - CORRECT ANSWER >>>sync sound
This is sound recorded on location but not in sync with the picture - CORRECT ANSWER >>>Wild
Sound
This the term for when picture is filmed without sound recording; the sound will be
built/designed in post - CORRECT ANSWER >>>MOS
This sound system is when sound is recorded on a separate device from the camera to be
synced up in post. - CORRECT ANSWER >>>Double-System Sound
This is when sound is recorded directly onto video media via the on-board camera mic/external
mic plugged into camera - CORRECT ANSWER >>>Single-System Sound
2|Page
, Which is preferred by professionals? Double-System Sound or Single-System Sound? - CORRECT
ANSWER >>>Double-System Sound
This tool identifies production and shot information for the editor; it is used for syncing
doublesystem sound - CORRECT ANSWER >>>The Slate
This term is for how often sound waves occur - cycles per second. It is measured in hertz (Hz). -
CORRECT ANSWER >>>Frequency
Bass/low sound occurs with this type of frequency. - CORRECT ANSWER >>>Less frequency
Treble/high sound occurs with this type of frequency. - CORRECT ANSWER >>>More frequency
This is the term for the "loudness" of sound. It is measured in decibels (dB). - CORRECT
ANSWER >>>Amplitude (higher=louder)
Human hearing range in dB. - CORRECT ANSWER >>>0-120
This is the term for the unique quality of a sound irrespective of frequency and amplitude. The
"color" of the sound. (For instance, how we distinguish different instruments playing the same
note) - CORRECT ANSWER >>>Timbre/Tone
This is the number of times sound is sampled/measured per second. - CORRECT ANSWER
>>>Sample rate
This is how precise each sample is (measured in bits). - CORRECT ANSWER >>>Bit depth
3|Page