Florida Sign Contractor Licensing Exam Test
Questions And Correct Answers (Verified Answers)
Plus Rationales 2025/2026 Q&A | Instant
Download Pdf
1. What is the primary Florida statute governing contractor licensing?
Chapter 489, Florida Statutes
This statute outlines the requirements, regulations, and disciplinary
actions for construction contractors in Florida, including sign contractors.
2. Which entity issues the Florida Sign Contractor License?
Florida Department of Business and Professional Regulation (DBPR)
The DBPR is the licensing authority for contractors in Florida, ensuring
they meet education, testing, and compliance requirements.
3. A licensed sign contractor in Florida can install which of the following?
Electrical and non-electrical signs
Florida sign contractor licenses cover both illuminated and non-
illuminated sign installations, as long as the work is within scope.
4. What is the minimum age to apply for a Florida Sign Contractor License?
18 years old
Applicants must be at least 18 years old to hold a contractor’s license
under state law.
,5. How many years of experience are generally required to qualify for the
exam?
4 years
Florida typically requires four years of verifiable experience, with at least
one year in a supervisory role, for licensing eligibility.
6. What type of insurance must a Florida sign contractor carry?
General liability and workers’ compensation insurance
Liability insurance protects against property damage and injury claims,
while workers’ comp covers employee injuries.
7. The Florida Building Code is updated every:
3 years
The building code is updated triennially to incorporate new safety
standards and construction technology.
8. Which chapter of the Florida Building Code primarily addresses signage?
Chapter 31
Chapter 31 contains specific design, construction, and installation
standards for signs and outdoor displays.
9. Which permit is typically required for a new illuminated sign?
Electrical permit
Illuminated signs require an electrical permit to ensure compliance with
the National Electrical Code.
10.What is the maximum height for a freestanding sign without requiring
engineering approval?
6 feet
, Signs exceeding 6 feet usually require an engineer’s design to ensure
structural stability.
11.OSHA requires fall protection for workers at heights above:
6 feet
OSHA regulations mandate fall protection at or above 6 feet to prevent
workplace injuries.
12.A “wind load” calculation ensures:
The sign can withstand expected wind forces
Wind load analysis ensures the sign’s structural design resists wind
pressure in compliance with Florida hurricane codes.
13.Florida is in which wind speed zone for signage design?
High-velocity hurricane zone (HVHZ) in some counties
Counties like Miami-Dade and Broward require stricter wind load
standards due to hurricane risks.
14.What electrical standard must illuminated signs comply with?
National Electrical Code (NEC)
The NEC ensures safe electrical installations and is adopted statewide in
Florida.
15.The underground location of utilities before digging is required under:
Florida’s “Call 811” law
Contractors must contact 811 before excavation to prevent damage to
underground utilities.
16.Which material is most common for outdoor illuminated sign faces?
Acrylic
, Acrylic is lightweight, weather-resistant, and transmits light well, making
it ideal for illuminated signs.
17.A sign permit application typically requires:
Site plan and engineered drawings
These documents verify compliance with zoning, building, and safety
regulations.
18.Which Florida administrative code covers contractor licensing rules?
Rule 61G4, Florida Administrative Code
This rule implements the provisions of Chapter 489 for contractor
regulation.
19.A licensed sign contractor may subcontract electrical work to:
A licensed electrical contractor
Electrical work outside a sign contractor’s scope must be done by a
licensed electrician.
20.In Florida, a sign overhanging a public right-of-way requires:
Special municipal approval
Local jurisdictions regulate signs over public property for safety and
aesthetic reasons.
21.What is the purpose of UL listing for sign components?
To verify electrical safety compliance
UL certification ensures components meet national safety standards.
22.A sign’s footing depth is determined primarily by:
Wind load and soil conditions
These factors affect the stability and structural design of sign supports.
Questions And Correct Answers (Verified Answers)
Plus Rationales 2025/2026 Q&A | Instant
Download Pdf
1. What is the primary Florida statute governing contractor licensing?
Chapter 489, Florida Statutes
This statute outlines the requirements, regulations, and disciplinary
actions for construction contractors in Florida, including sign contractors.
2. Which entity issues the Florida Sign Contractor License?
Florida Department of Business and Professional Regulation (DBPR)
The DBPR is the licensing authority for contractors in Florida, ensuring
they meet education, testing, and compliance requirements.
3. A licensed sign contractor in Florida can install which of the following?
Electrical and non-electrical signs
Florida sign contractor licenses cover both illuminated and non-
illuminated sign installations, as long as the work is within scope.
4. What is the minimum age to apply for a Florida Sign Contractor License?
18 years old
Applicants must be at least 18 years old to hold a contractor’s license
under state law.
,5. How many years of experience are generally required to qualify for the
exam?
4 years
Florida typically requires four years of verifiable experience, with at least
one year in a supervisory role, for licensing eligibility.
6. What type of insurance must a Florida sign contractor carry?
General liability and workers’ compensation insurance
Liability insurance protects against property damage and injury claims,
while workers’ comp covers employee injuries.
7. The Florida Building Code is updated every:
3 years
The building code is updated triennially to incorporate new safety
standards and construction technology.
8. Which chapter of the Florida Building Code primarily addresses signage?
Chapter 31
Chapter 31 contains specific design, construction, and installation
standards for signs and outdoor displays.
9. Which permit is typically required for a new illuminated sign?
Electrical permit
Illuminated signs require an electrical permit to ensure compliance with
the National Electrical Code.
10.What is the maximum height for a freestanding sign without requiring
engineering approval?
6 feet
, Signs exceeding 6 feet usually require an engineer’s design to ensure
structural stability.
11.OSHA requires fall protection for workers at heights above:
6 feet
OSHA regulations mandate fall protection at or above 6 feet to prevent
workplace injuries.
12.A “wind load” calculation ensures:
The sign can withstand expected wind forces
Wind load analysis ensures the sign’s structural design resists wind
pressure in compliance with Florida hurricane codes.
13.Florida is in which wind speed zone for signage design?
High-velocity hurricane zone (HVHZ) in some counties
Counties like Miami-Dade and Broward require stricter wind load
standards due to hurricane risks.
14.What electrical standard must illuminated signs comply with?
National Electrical Code (NEC)
The NEC ensures safe electrical installations and is adopted statewide in
Florida.
15.The underground location of utilities before digging is required under:
Florida’s “Call 811” law
Contractors must contact 811 before excavation to prevent damage to
underground utilities.
16.Which material is most common for outdoor illuminated sign faces?
Acrylic
, Acrylic is lightweight, weather-resistant, and transmits light well, making
it ideal for illuminated signs.
17.A sign permit application typically requires:
Site plan and engineered drawings
These documents verify compliance with zoning, building, and safety
regulations.
18.Which Florida administrative code covers contractor licensing rules?
Rule 61G4, Florida Administrative Code
This rule implements the provisions of Chapter 489 for contractor
regulation.
19.A licensed sign contractor may subcontract electrical work to:
A licensed electrical contractor
Electrical work outside a sign contractor’s scope must be done by a
licensed electrician.
20.In Florida, a sign overhanging a public right-of-way requires:
Special municipal approval
Local jurisdictions regulate signs over public property for safety and
aesthetic reasons.
21.What is the purpose of UL listing for sign components?
To verify electrical safety compliance
UL certification ensures components meet national safety standards.
22.A sign’s footing depth is determined primarily by:
Wind load and soil conditions
These factors affect the stability and structural design of sign supports.
