CDFA Weight Verification Practice Questions
Study online at https://quizlet.com/_622osj
1. Specifications are particularly directed to Manufacturers of devices
2. Newly manufactured scales are required to Class I, II, III, IIIL, or IIII
be designated as
3. The normal valance position of the weigh- horizontal
beam of a beam scale shall be
4. A county sealer/ director of W&M may, with Different from regulations
the approval of the Secretary of Food and
Agriculture, use a frequency of inspection
which is
5. On a prescription scale equipped with a bal- 0.04 inches
ance indicator, if this indicator consists of
an indicator and a graduated scale and they
are not in the same plane, the clearance
between the indicator and the graduations
shall not be more than
6. Graduations of a scale beam shall be so var- they may be conveniently read
ied in length that
7. A poise stop is not necessary on a steelyard there is no zero graduation
when
8. The adjusting material in a poise shall be se- brass
curely enclosed and firmly fixed in position
and it shall not be in contact with the weigh
beam, if softer than
9. The sensitivity requirement of a scale shall regardless of maintenance and accep-
be applied in conjunction with tance tolerances
, CDFA Weight Verification Practice Questions
Study online at https://quizlet.com/_622osj
10. A variable frequency inspection plan shall regular frequency, variable frequency and
provide for testing of all commercial devices statistical sampling procedure
on
11. Each weighing device shall have a minimum Name, initials or trademark of the manu-
of one permanent and conspicuous identi- facturer or distributor, model number, and
fication marking with what information non repetitive serial number
12. The graduated interval is distance from the center of one gradua-
tion to the center of the next graduation
in a graduated series
13. non retroactive means Only enforceable with respect to devices
made after implimentation
14. Meat beams, steelyards, portable platform, identical
and belt conveyor scales all have a frequen-
cy of inspection which is
15. An axle load scale is normally permanently installed
16. what term does not apply to nose iron range
17. The term nominal when used in reference intended or stated value
to a scale, measure, weight, etc. means
18. A tare mechanism is used primarily for the balancing out the weight of empty con-
purpose of tainers
19. the director may issue rules and regulations device repairmen, accuracy of commercial
for devices, and responsibilities of device re-
pairmen
20. 18 grams
Study online at https://quizlet.com/_622osj
1. Specifications are particularly directed to Manufacturers of devices
2. Newly manufactured scales are required to Class I, II, III, IIIL, or IIII
be designated as
3. The normal valance position of the weigh- horizontal
beam of a beam scale shall be
4. A county sealer/ director of W&M may, with Different from regulations
the approval of the Secretary of Food and
Agriculture, use a frequency of inspection
which is
5. On a prescription scale equipped with a bal- 0.04 inches
ance indicator, if this indicator consists of
an indicator and a graduated scale and they
are not in the same plane, the clearance
between the indicator and the graduations
shall not be more than
6. Graduations of a scale beam shall be so var- they may be conveniently read
ied in length that
7. A poise stop is not necessary on a steelyard there is no zero graduation
when
8. The adjusting material in a poise shall be se- brass
curely enclosed and firmly fixed in position
and it shall not be in contact with the weigh
beam, if softer than
9. The sensitivity requirement of a scale shall regardless of maintenance and accep-
be applied in conjunction with tance tolerances
, CDFA Weight Verification Practice Questions
Study online at https://quizlet.com/_622osj
10. A variable frequency inspection plan shall regular frequency, variable frequency and
provide for testing of all commercial devices statistical sampling procedure
on
11. Each weighing device shall have a minimum Name, initials or trademark of the manu-
of one permanent and conspicuous identi- facturer or distributor, model number, and
fication marking with what information non repetitive serial number
12. The graduated interval is distance from the center of one gradua-
tion to the center of the next graduation
in a graduated series
13. non retroactive means Only enforceable with respect to devices
made after implimentation
14. Meat beams, steelyards, portable platform, identical
and belt conveyor scales all have a frequen-
cy of inspection which is
15. An axle load scale is normally permanently installed
16. what term does not apply to nose iron range
17. The term nominal when used in reference intended or stated value
to a scale, measure, weight, etc. means
18. A tare mechanism is used primarily for the balancing out the weight of empty con-
purpose of tainers
19. the director may issue rules and regulations device repairmen, accuracy of commercial
for devices, and responsibilities of device re-
pairmen
20. 18 grams
