FDI Exam 2 Review exam with complete
SOLUTIONS
Total filtration is defined as _______ and ________ filtration. - ANSadded; inherent
Which of the following steps does NOT occur during the x-ray tube preparation? -
ANSX-rays and heat are produced.
Electrons are "boiled" off what portion of the x-ray tube? - ANSfilament
X-rays that are produced from any area other than the focal spot are known as
________ radiation. - ANSoff-focus
Which primary exposure factor influences both the quantity and the quality of the x-ray
beam? - ANSkVp
Which process accounts for a majority of the x-ray production in diagnostic ranges? -
ANSBremsstrahlung
Which of the following has the greatest effect on x-ray quantity? - ANSmAs
What term is used to describe the boiling off of electrons from the filament when current
is applied? - ANSthermionic emission
Which orbital electron shell has the strongest binding energy and is the most useful in x-
ray production? - ANSK
An x-ray generator that produces a 100% voltage ripple can be described as a
______________. - ANSsingle phase
When filtration is added to an x-ray beam, the _______________ of the beam
increases. - ANSquality
Which type of x-ray production is dependent on the k-shell electron binding energy? -
ANSCharacteristic
Which of the following steps does NOT occur during the x-ray exposure? - ANSThe
rotating target begins to turn rapidly in an effort to reach top speed.
Electrons can only flow from the cathode to the anode in an x-ray tube. - ANSTrue
,A 15 degree Anode target angle will have a smaller effective focal spot than a 10
degree Anode target angle. - ANSFalse
Which of the following processes does NOT occur when the diagnostic primary x-ray
beam interacts with anatomic tissues? - ANSspatial resolution
Radiographic images of objects are always magnified in size in terms of the true object
size. - ANSTrue
What has the greatest influence on the probability of a Compton interaction occurring? -
ANSThe energy of the incoming photon.
Increasing mAs decreases radiographic (optical) density. - ANSFalse
Which interaction with matter removes an inner shell electron from an atom? -
ANSPhotoelectric effect
Radiographic or image contrast is defined as - ANSthe measurement of the difference
in the blackening of the radiographic film
Which interaction of matter is defined as a loss of energy of the incoming photon
occurring when it ejects an outer-shell electron from an atom? - ANSCompton effect
A film image with a few visible densities but great differences among them is known as -
ANShigh contrast
Which interaction with matter is considered complete absorption of the incoming
photon? - ANSPhotoelectric
The ability to remove or eject an electron from an atom is called - ANSionization
What is the reduction in the intensity or number of photons in the primary x-ray beam
called? - ANSBeam attenuation
A radiograph that has a fogged, blurred or dull appearance has most likely been
exposed to which of the following? - ANSCompton radiation
What has the greatest influence of size distortion or magnification? - ANSobject-to-
image distance (OID)
Scatter radiation that contributes to unwanted information on a radiograph is called -
ANSfog
Which of the following will result in decreased attenuation of the x-ray beam by the
patient? - ANSincreased kVp
, X-ray photon absorption is due to ______________ ________________, whereas x-ray
photon scatter is due to _______________ ______________. - ANSphotoelectric effect;
Compton effect
For a fixed radiographic exposure, increasing part/object thickness decreases
radiographic density. - ANSTrue
When a higher kVp within the diagnostic range is used, the overall number of x-ray
interactions within matter decreases; however, the percentage of Compton interactions
is likely to increase. - ANSTrue
Radiographic density is defined as _______________. - ANSthe measurement of the
overall blackening of the radiographic image
The reduction in the intensity or number of photons in the primary x-ray beam is known
as - ANSattenuation
What is the matrix of the computed image composed of? - ANSpixels
Digital imaging quality is improved with a smaller matrix size and includes a fewer
number of larger pixels. - ANSfalse
__________________ results when there are too few x-ray photons captured by the
image receptor (IR) to create a latent image. - ANSQuantum noise
The process of differential absorption for image formation is the same for digital and
film-screen imaging. - ANStrue
What is the purpose of a picture archival and communication systems (PACS)? - ANSD.
All of the above.
A. To receive digital radiology images.
B. To store digital radiology images.
C. To display digital radiology images.
D. All of the above.
What serves the same purpose in conventional radiography as the imaging plate used
in computed radiography? - ANSFilm/screen
A numeric value indicating the level of radiation exposure to the digital image receptor
(IR) is referred to as ___________________. - ANSexposure indicator
There is a tremendous flexibility in terms of alternating brightness (density) and contrast
of a digital image. - ANStrue
SOLUTIONS
Total filtration is defined as _______ and ________ filtration. - ANSadded; inherent
Which of the following steps does NOT occur during the x-ray tube preparation? -
ANSX-rays and heat are produced.
Electrons are "boiled" off what portion of the x-ray tube? - ANSfilament
X-rays that are produced from any area other than the focal spot are known as
________ radiation. - ANSoff-focus
Which primary exposure factor influences both the quantity and the quality of the x-ray
beam? - ANSkVp
Which process accounts for a majority of the x-ray production in diagnostic ranges? -
ANSBremsstrahlung
Which of the following has the greatest effect on x-ray quantity? - ANSmAs
What term is used to describe the boiling off of electrons from the filament when current
is applied? - ANSthermionic emission
Which orbital electron shell has the strongest binding energy and is the most useful in x-
ray production? - ANSK
An x-ray generator that produces a 100% voltage ripple can be described as a
______________. - ANSsingle phase
When filtration is added to an x-ray beam, the _______________ of the beam
increases. - ANSquality
Which type of x-ray production is dependent on the k-shell electron binding energy? -
ANSCharacteristic
Which of the following steps does NOT occur during the x-ray exposure? - ANSThe
rotating target begins to turn rapidly in an effort to reach top speed.
Electrons can only flow from the cathode to the anode in an x-ray tube. - ANSTrue
,A 15 degree Anode target angle will have a smaller effective focal spot than a 10
degree Anode target angle. - ANSFalse
Which of the following processes does NOT occur when the diagnostic primary x-ray
beam interacts with anatomic tissues? - ANSspatial resolution
Radiographic images of objects are always magnified in size in terms of the true object
size. - ANSTrue
What has the greatest influence on the probability of a Compton interaction occurring? -
ANSThe energy of the incoming photon.
Increasing mAs decreases radiographic (optical) density. - ANSFalse
Which interaction with matter removes an inner shell electron from an atom? -
ANSPhotoelectric effect
Radiographic or image contrast is defined as - ANSthe measurement of the difference
in the blackening of the radiographic film
Which interaction of matter is defined as a loss of energy of the incoming photon
occurring when it ejects an outer-shell electron from an atom? - ANSCompton effect
A film image with a few visible densities but great differences among them is known as -
ANShigh contrast
Which interaction with matter is considered complete absorption of the incoming
photon? - ANSPhotoelectric
The ability to remove or eject an electron from an atom is called - ANSionization
What is the reduction in the intensity or number of photons in the primary x-ray beam
called? - ANSBeam attenuation
A radiograph that has a fogged, blurred or dull appearance has most likely been
exposed to which of the following? - ANSCompton radiation
What has the greatest influence of size distortion or magnification? - ANSobject-to-
image distance (OID)
Scatter radiation that contributes to unwanted information on a radiograph is called -
ANSfog
Which of the following will result in decreased attenuation of the x-ray beam by the
patient? - ANSincreased kVp
, X-ray photon absorption is due to ______________ ________________, whereas x-ray
photon scatter is due to _______________ ______________. - ANSphotoelectric effect;
Compton effect
For a fixed radiographic exposure, increasing part/object thickness decreases
radiographic density. - ANSTrue
When a higher kVp within the diagnostic range is used, the overall number of x-ray
interactions within matter decreases; however, the percentage of Compton interactions
is likely to increase. - ANSTrue
Radiographic density is defined as _______________. - ANSthe measurement of the
overall blackening of the radiographic image
The reduction in the intensity or number of photons in the primary x-ray beam is known
as - ANSattenuation
What is the matrix of the computed image composed of? - ANSpixels
Digital imaging quality is improved with a smaller matrix size and includes a fewer
number of larger pixels. - ANSfalse
__________________ results when there are too few x-ray photons captured by the
image receptor (IR) to create a latent image. - ANSQuantum noise
The process of differential absorption for image formation is the same for digital and
film-screen imaging. - ANStrue
What is the purpose of a picture archival and communication systems (PACS)? - ANSD.
All of the above.
A. To receive digital radiology images.
B. To store digital radiology images.
C. To display digital radiology images.
D. All of the above.
What serves the same purpose in conventional radiography as the imaging plate used
in computed radiography? - ANSFilm/screen
A numeric value indicating the level of radiation exposure to the digital image receptor
(IR) is referred to as ___________________. - ANSexposure indicator
There is a tremendous flexibility in terms of alternating brightness (density) and contrast
of a digital image. - ANStrue