RVTI Level 1 Final Exam Questions
with Correct Answers | 100%
Guaranteed Pass| Updated|
Newest Version
1. To measure current with a VOM connect the VOM in _______ with the
source - ANSWER ✓ Series
2. To measure for voltage connect the meter in ______ with the load -
ANSWER ✓ Parallel
3. Connecting batteries in ______ the positive of the 1st battery connects to the
negative of the second, and the positive of the second connects to the
negative of the 3rd and so forth. The negative of the 1st battery and the
positive of the last battery both connect to the inverter. - ANSWER ✓ Series
4. To connect batteries in ______ the positive of the 1st battery connects to the
positive of the second battery while negative connects to negative. Negative
of the 1st battery and positive of the last battery connection to inverter -
ANSWER ✓ Parallel
5. Connecting the meter in parallel with a load tests for? - ANSWER ✓
Voltage
6. Connecting a VOM in series with a source tests for? - ANSWER ✓ Current
7. What is the function of refrigerant - ANSWER ✓ Extracts heat and moisture
8. The refrigerators are compression driven - ANSWER ✓ Residential RV
refrigerator
9. Most commonly used fridge in Rvs - ANSWER ✓ Absorption refrigerator
,10.During propane pressure test at fridge use what tool? - ANSWER ✓
Manometer
11.This heats water as it passes through a heated coil - ANSWER ✓
Instantaneous water heater
12.Propane flow will be prevented as a result of ________ not preforming well
- ANSWER ✓ Thermocouple
13.This is a cooktop with an oven - ANSWER ✓ Range
14.What is located in burner box of a range - ANSWER ✓ Data plate
15.When testing ovens set temperature to what? - ANSWER ✓ 300 degrees F
16.2 main types of microwaves - ANSWER ✓ Standard
Convection
17.On a pdi of microwave document 3 things - ANSWER ✓ Make
Model
Serial number
18.To test microwave: - ANSWER ✓ Place cup of water for one minute
19.What is the most common function of all hydronic heating systems? -
ANSWER ✓ Interior heating
20.Boiler tank in hydronic heating system is heated in 3 ways - ANSWER ✓ 1.
When unit plugged in
21.2. Vehicle running
22.3. Through burner using diesel or propane
23.This tool is used when preforming a propylene glycol level test - ANSWER
✓ Refractometer
24.When inspecting roof/ducted AC be sure to - ANSWER ✓ Test fan speed
and operation of vents
, 25.3 controls on an AC - ANSWER ✓ Mode selector
Volume control lever
Temperature control
26.This ultimately determines if the AC is functioning properly - ANSWER ✓
Delta temp
27.During a 12-24 hr test on fridge the thermometer should read? - ANSWER
✓ 40-43 degrees F
28.2 types of furnaces - ANSWER ✓ Forced air
29.Hydronic
30.When conducting pdi on furnaces the thermostat should be set where? -
ANSWER ✓ Highest setting
31.To know a furnace is working properly airflow should be warmer than
_______ - ANSWER ✓ Ambient temperature
32.3 types of Air conditioner - ANSWER ✓ Roof top unit
33.Basement unit
34.Window unit
35.When ac is running it should be 20 degree cooler than outside temp. This is
known as - ANSWER ✓ Delta T
36.Common unit of measurement for appliances is: - ANSWER ✓ BTU
(British thermal unit)
37.This furnace uses outside wire through sealed combustion chamber assembly
to heat - ANSWER ✓ Forced air furnace
38.This furnace uses a heat surface to heat water distributed to radiators -
ANSWER ✓ Hydronic system
39.4 types of water heaters are electric, instantaneous, direct spark ignition and
_____ - ANSWER ✓ Manual pilot ignition
with Correct Answers | 100%
Guaranteed Pass| Updated|
Newest Version
1. To measure current with a VOM connect the VOM in _______ with the
source - ANSWER ✓ Series
2. To measure for voltage connect the meter in ______ with the load -
ANSWER ✓ Parallel
3. Connecting batteries in ______ the positive of the 1st battery connects to the
negative of the second, and the positive of the second connects to the
negative of the 3rd and so forth. The negative of the 1st battery and the
positive of the last battery both connect to the inverter. - ANSWER ✓ Series
4. To connect batteries in ______ the positive of the 1st battery connects to the
positive of the second battery while negative connects to negative. Negative
of the 1st battery and positive of the last battery connection to inverter -
ANSWER ✓ Parallel
5. Connecting the meter in parallel with a load tests for? - ANSWER ✓
Voltage
6. Connecting a VOM in series with a source tests for? - ANSWER ✓ Current
7. What is the function of refrigerant - ANSWER ✓ Extracts heat and moisture
8. The refrigerators are compression driven - ANSWER ✓ Residential RV
refrigerator
9. Most commonly used fridge in Rvs - ANSWER ✓ Absorption refrigerator
,10.During propane pressure test at fridge use what tool? - ANSWER ✓
Manometer
11.This heats water as it passes through a heated coil - ANSWER ✓
Instantaneous water heater
12.Propane flow will be prevented as a result of ________ not preforming well
- ANSWER ✓ Thermocouple
13.This is a cooktop with an oven - ANSWER ✓ Range
14.What is located in burner box of a range - ANSWER ✓ Data plate
15.When testing ovens set temperature to what? - ANSWER ✓ 300 degrees F
16.2 main types of microwaves - ANSWER ✓ Standard
Convection
17.On a pdi of microwave document 3 things - ANSWER ✓ Make
Model
Serial number
18.To test microwave: - ANSWER ✓ Place cup of water for one minute
19.What is the most common function of all hydronic heating systems? -
ANSWER ✓ Interior heating
20.Boiler tank in hydronic heating system is heated in 3 ways - ANSWER ✓ 1.
When unit plugged in
21.2. Vehicle running
22.3. Through burner using diesel or propane
23.This tool is used when preforming a propylene glycol level test - ANSWER
✓ Refractometer
24.When inspecting roof/ducted AC be sure to - ANSWER ✓ Test fan speed
and operation of vents
, 25.3 controls on an AC - ANSWER ✓ Mode selector
Volume control lever
Temperature control
26.This ultimately determines if the AC is functioning properly - ANSWER ✓
Delta temp
27.During a 12-24 hr test on fridge the thermometer should read? - ANSWER
✓ 40-43 degrees F
28.2 types of furnaces - ANSWER ✓ Forced air
29.Hydronic
30.When conducting pdi on furnaces the thermostat should be set where? -
ANSWER ✓ Highest setting
31.To know a furnace is working properly airflow should be warmer than
_______ - ANSWER ✓ Ambient temperature
32.3 types of Air conditioner - ANSWER ✓ Roof top unit
33.Basement unit
34.Window unit
35.When ac is running it should be 20 degree cooler than outside temp. This is
known as - ANSWER ✓ Delta T
36.Common unit of measurement for appliances is: - ANSWER ✓ BTU
(British thermal unit)
37.This furnace uses outside wire through sealed combustion chamber assembly
to heat - ANSWER ✓ Forced air furnace
38.This furnace uses a heat surface to heat water distributed to radiators -
ANSWER ✓ Hydronic system
39.4 types of water heaters are electric, instantaneous, direct spark ignition and
_____ - ANSWER ✓ Manual pilot ignition
