Vivint Smart Home Pro Final Exam : QUESTION AND
ANSWERS UPDATED 2025 LATEST
What is the input voltage range of the Doorbell Cam? - (ANSWER)12-24v
What is the output voltage of the transformer used to power the SkyControl
panel? - (ANSWER)16.5 VAC
True or False: When programming a sensor into the sky panel you can type in the
serial number or "learn" it in by triggering the device - (ANSWER)true
When programming a DW21, which loop number is used?
1
2
3 - (ANSWER)2
Which of the following materials can you use to group multiple ground terminals
in a takeover module:
Solder
String
Wire Caps
Duct Tape
Beans - (ANSWER)beans and wire caps
, T or F: When installing the firefighter, it is required to test the customer's existing
smoke detectors - (ANSWER)True
When installing a DW21, what size bit should you use to drill the hole for the
sensor?
1/2"
3/8"
3/4"
1" - (ANSWER)3/4"
T or F: When installing the TAKE-345, you must ensure that the transformer is
supplying power to the power supply before the battery. - (ANSWER)True
T or F: You are required to test signals from all secondary keypads and key fobs
even though they are not detection devices - (ANSWER)True
T or F: When running power to the TAKE-345 polarity does not apply -
(ANSWER)False
What is the correct height at which to install the PIR2?
7 ft
At least 5 ft
At least 7 ft
ANSWERS UPDATED 2025 LATEST
What is the input voltage range of the Doorbell Cam? - (ANSWER)12-24v
What is the output voltage of the transformer used to power the SkyControl
panel? - (ANSWER)16.5 VAC
True or False: When programming a sensor into the sky panel you can type in the
serial number or "learn" it in by triggering the device - (ANSWER)true
When programming a DW21, which loop number is used?
1
2
3 - (ANSWER)2
Which of the following materials can you use to group multiple ground terminals
in a takeover module:
Solder
String
Wire Caps
Duct Tape
Beans - (ANSWER)beans and wire caps
, T or F: When installing the firefighter, it is required to test the customer's existing
smoke detectors - (ANSWER)True
When installing a DW21, what size bit should you use to drill the hole for the
sensor?
1/2"
3/8"
3/4"
1" - (ANSWER)3/4"
T or F: When installing the TAKE-345, you must ensure that the transformer is
supplying power to the power supply before the battery. - (ANSWER)True
T or F: You are required to test signals from all secondary keypads and key fobs
even though they are not detection devices - (ANSWER)True
T or F: When running power to the TAKE-345 polarity does not apply -
(ANSWER)False
What is the correct height at which to install the PIR2?
7 ft
At least 5 ft
At least 7 ft
