Page | 1
Revit Certification Questions with
Detailed Verified Answers
Question:Which part of the user interface changes according to the command
you are using?
Ans: Options Bar
Question: As a best management practice, should you acquire, or publish
coordinates when working with a CAD site file created by a civil engineer?
Ans: Acquire coordinates so that the Revit model can pull the real world
coordinates from the civil engineer's file.
Question: Which of the following is an example of subtractive modeling?
Ans: Modeling a large object and using voids to create the desired shape.
Question: The only way to place a material is to define a type property with
that material.
Ans: False
Question: Shadows generated in Revit are:
Ans: Based upon real-world locations, dates, and times
, Page | 2
Question: You must make openings in walls before you can place windows or
doors.
Ans: False
Question: When should you NOT use a stacked wall?
Ans: When two different types of walls are intended to sit on top of each
other.
Question: The Tab key can be helpful when working with curtain walls and
selecting individual panels because when pressed:
Ans: It cycles through selection options.
Question: Which command do you start with to create a curtain wall?
Ans: wall
Question: Curtain walls automatically embed into basic wall types.
Ans: False
Question: Roofs in Revit are typically drawn flat, and then model lines are
used to show hips and valleys.
Ans: False
, Page | 3
Question: When drawing a Roof by Footprint in plan view, all lines must
define slope
Ans: False
Question: Which of the following is NOT a stair component?
Ans: treads
Question: Stairs must have an associated bottom level, but may have an
associated top level or no top level association
Ans: True
Question: openings in Revit should always be placed using the By Face tool.
Ans: False
Question: Which is not a type of Revit column?
Ans: commercial
Question: Columns can only be placed on grid intersections
Ans: F
Question: All rooms must be placed within room bounding elements.
Revit Certification Questions with
Detailed Verified Answers
Question:Which part of the user interface changes according to the command
you are using?
Ans: Options Bar
Question: As a best management practice, should you acquire, or publish
coordinates when working with a CAD site file created by a civil engineer?
Ans: Acquire coordinates so that the Revit model can pull the real world
coordinates from the civil engineer's file.
Question: Which of the following is an example of subtractive modeling?
Ans: Modeling a large object and using voids to create the desired shape.
Question: The only way to place a material is to define a type property with
that material.
Ans: False
Question: Shadows generated in Revit are:
Ans: Based upon real-world locations, dates, and times
, Page | 2
Question: You must make openings in walls before you can place windows or
doors.
Ans: False
Question: When should you NOT use a stacked wall?
Ans: When two different types of walls are intended to sit on top of each
other.
Question: The Tab key can be helpful when working with curtain walls and
selecting individual panels because when pressed:
Ans: It cycles through selection options.
Question: Which command do you start with to create a curtain wall?
Ans: wall
Question: Curtain walls automatically embed into basic wall types.
Ans: False
Question: Roofs in Revit are typically drawn flat, and then model lines are
used to show hips and valleys.
Ans: False
, Page | 3
Question: When drawing a Roof by Footprint in plan view, all lines must
define slope
Ans: False
Question: Which of the following is NOT a stair component?
Ans: treads
Question: Stairs must have an associated bottom level, but may have an
associated top level or no top level association
Ans: True
Question: openings in Revit should always be placed using the By Face tool.
Ans: False
Question: Which is not a type of Revit column?
Ans: commercial
Question: Columns can only be placed on grid intersections
Ans: F
Question: All rooms must be placed within room bounding elements.
