Electrician's Licensing Test 2025
NEC Article ______ defines breakers and fuses. - CORRECT ANSWER-According to
NEC Article 100, a device that opens and closes a circuit by nonautomatic means
automatically closes for a predetermined overcurrent.
Annex _____ of NEC covers conduit fill. - CORRECT ANSWER-Annex C of NEC
covers conduit and tubing fill for conductors and fixture wire fill.
NEMA stands for National Electrical Manufacturers Association - CORRECT ANSWER-
True - NEMA is the acronym for National Electrical Manufacturers Association.
What does it mean when a receptacle has "NEMA 5-20R" on it? - CORRECT
ANSWER-A receptacle with NEMA 5-20R on it has an amperes rating of 20, will take a
NEMA-5-15P or NEMA-5-20P plug, and has a voltage rating of 125.
NEC Tables 310-10 through 310-21 provide information on. - CORRECT ANSWER-The
sizes of copper and aluminum wire, as well as the coating of wire that has fewer than
three current carrying wires in a cable or conduit or that is buried in the earth.
Which NEC tables(s) cover(s) the fill of metal boxes? - CORRECT ANSWER-The fill of
metal boxes appears in NEC Tables 314.6 A and B.
NEC Article _____ address EMT. - CORRECT ANSWER-NEC Article 358 covers EMT.
Which NEC articles cover the installation requirements for RMC, IMC, and EMT? -
CORRECT ANSWER-NEC Articles 342, 344, and 358 outline the installation
requirements of RMC, IMC, and EMT.
IN NEC 2008, what does Table 370.6A cover? - CORRECT ANSWER-Shows in two
columns (milimeters and inches), how many wires in trade size you can place in a box.
What NEC table would you go to to find trade size of conduit and raceway size? -
CORRECT ANSWER-Chapter 9, Table 4 outlines trade size of conduit as well as
raceway size.
,NEC Articles _____ and _____ covers metallic and non-metallic raceways in buildings. -
CORRECT ANSWER-NEC Article 386 covers metallic or metal raceway; NEC Article
388 covers PVC pipe.
The Panel Board requirements for Application in Construction appear in NEC Article? -
CORRECT ANSWER-NEC Article 408 covers panel board applications.
The smaller kitchen counter requiring a receptacle is _____ inches. - CORRECT
ANSWER-A 12in. counter requires a receptacle because it holds small appliances.
What new code is needed for protection in all habitable spaces? - CORRECT
ANSWER-According to new codes, ARC fault protection is needed many additional
parts of the house.
A 12-foot hallway requires one receptacle to meet code. (True or False) - CORRECT
ANSWER-True, One is required, Two are suggested.
NEC Article 100 is dedicated to? - CORRECT ANSWER-Definitions
The main ground on a service is a(n) _____. - CORRECT ANSWER-Ground Rod
What does NEC Section 250-28A require? - CORRECT ANSWER-A main bonding
jumper and a system bonding jumper.
NEC section 250-28A provides information on what material can be used for a main
bonding jumper. (True or False) - CORRECT ANSWER-True
A bonding screw is what color? - CORRECT ANSWER-A bonding screw is green.
A subpanel requires a bonding screw? (True or False) - CORRECT ANSWER-False, A
bonding screw is unneeded in a subpanel.
Name the methods of sizing bonding jumpers outlined in NEC Section 250-28D. -
CORRECT ANSWER-1. Bonding jumper is sized not less than 12.5% of the largest
phase conductor.
2. Based on the largest ungrounded service conductor.
3. Based on the largest sum of the service conductors.
NEC Table _____ covers grounding electrode conductor sizing. - CORRECT ANSWER-
NEC Table 250.66
Which NEC reference identifies wire sizing and the temperature a wire can handle in
amps? - CORRECT ANSWER-NEC Tables Annex C1 and C2 identify both wire sizing
and the temperature a wire can handle in amps.
, Define a grounding system according to NEC. - CORRECT ANSWER-A gounding
system is connected to the ground or to a conductive body that extends the ground
connection.
What is the topic of NEC Section 250-122? - CORRECT ANSWER-Is dedicated to the
sizes of the grounding conductor
What is the NEC definition of a circuit breaker? - CORRECT ANSWER-A device
designed to trip when an overcurrent is detected.
NEC Section 300-13 provides information on? - CORRECT ANSWER-Mechanical and
Electrical continuity conductors.
What is the subject of NEC Section 250-2D? - CORRECT ANSWER-Bonding jumpers
______ are the subject of NEC Section 680-20. - CORRECT ANSWER-Electrical
installations at permanently installed pools.
Which NEC Section covers equipment grounding conductors. - CORRECT ANSWER-
NEC Section 250-118
Which NEC sections covers identification of equipment grounding conductors? -
CORRECT ANSWER-NEC Section 250-119 1-14
Which NEC Section covers ground terminal identification. - CORRECT ANSWER-NEC
Section 250-126
Bonding is the establishment of ______ connection between metal parts. - CORRECT
ANSWER-Reliable
NEC Section 250-134 provides information on what topic? - CORRECT ANSWER-
Equipment fastened or connection between metal parts.
Equipment grounding conductor _____ is (are) discussed in NEC Section 250-130. -
CORRECT ANSWER-Connections
NEC Section 250-118 states that a grounded conduct must run _____ flexible conduit. -
CORRECT ANSWER-inside
NEC Section _____ oversees bonding of flexible type conduit. - CORRECT ANSWER-
NEC Section 250.118(5)
Which NEC article covers cable trays? - CORRECT ANSWER-NEC Article 392
NEC Article ______ defines breakers and fuses. - CORRECT ANSWER-According to
NEC Article 100, a device that opens and closes a circuit by nonautomatic means
automatically closes for a predetermined overcurrent.
Annex _____ of NEC covers conduit fill. - CORRECT ANSWER-Annex C of NEC
covers conduit and tubing fill for conductors and fixture wire fill.
NEMA stands for National Electrical Manufacturers Association - CORRECT ANSWER-
True - NEMA is the acronym for National Electrical Manufacturers Association.
What does it mean when a receptacle has "NEMA 5-20R" on it? - CORRECT
ANSWER-A receptacle with NEMA 5-20R on it has an amperes rating of 20, will take a
NEMA-5-15P or NEMA-5-20P plug, and has a voltage rating of 125.
NEC Tables 310-10 through 310-21 provide information on. - CORRECT ANSWER-The
sizes of copper and aluminum wire, as well as the coating of wire that has fewer than
three current carrying wires in a cable or conduit or that is buried in the earth.
Which NEC tables(s) cover(s) the fill of metal boxes? - CORRECT ANSWER-The fill of
metal boxes appears in NEC Tables 314.6 A and B.
NEC Article _____ address EMT. - CORRECT ANSWER-NEC Article 358 covers EMT.
Which NEC articles cover the installation requirements for RMC, IMC, and EMT? -
CORRECT ANSWER-NEC Articles 342, 344, and 358 outline the installation
requirements of RMC, IMC, and EMT.
IN NEC 2008, what does Table 370.6A cover? - CORRECT ANSWER-Shows in two
columns (milimeters and inches), how many wires in trade size you can place in a box.
What NEC table would you go to to find trade size of conduit and raceway size? -
CORRECT ANSWER-Chapter 9, Table 4 outlines trade size of conduit as well as
raceway size.
,NEC Articles _____ and _____ covers metallic and non-metallic raceways in buildings. -
CORRECT ANSWER-NEC Article 386 covers metallic or metal raceway; NEC Article
388 covers PVC pipe.
The Panel Board requirements for Application in Construction appear in NEC Article? -
CORRECT ANSWER-NEC Article 408 covers panel board applications.
The smaller kitchen counter requiring a receptacle is _____ inches. - CORRECT
ANSWER-A 12in. counter requires a receptacle because it holds small appliances.
What new code is needed for protection in all habitable spaces? - CORRECT
ANSWER-According to new codes, ARC fault protection is needed many additional
parts of the house.
A 12-foot hallway requires one receptacle to meet code. (True or False) - CORRECT
ANSWER-True, One is required, Two are suggested.
NEC Article 100 is dedicated to? - CORRECT ANSWER-Definitions
The main ground on a service is a(n) _____. - CORRECT ANSWER-Ground Rod
What does NEC Section 250-28A require? - CORRECT ANSWER-A main bonding
jumper and a system bonding jumper.
NEC section 250-28A provides information on what material can be used for a main
bonding jumper. (True or False) - CORRECT ANSWER-True
A bonding screw is what color? - CORRECT ANSWER-A bonding screw is green.
A subpanel requires a bonding screw? (True or False) - CORRECT ANSWER-False, A
bonding screw is unneeded in a subpanel.
Name the methods of sizing bonding jumpers outlined in NEC Section 250-28D. -
CORRECT ANSWER-1. Bonding jumper is sized not less than 12.5% of the largest
phase conductor.
2. Based on the largest ungrounded service conductor.
3. Based on the largest sum of the service conductors.
NEC Table _____ covers grounding electrode conductor sizing. - CORRECT ANSWER-
NEC Table 250.66
Which NEC reference identifies wire sizing and the temperature a wire can handle in
amps? - CORRECT ANSWER-NEC Tables Annex C1 and C2 identify both wire sizing
and the temperature a wire can handle in amps.
, Define a grounding system according to NEC. - CORRECT ANSWER-A gounding
system is connected to the ground or to a conductive body that extends the ground
connection.
What is the topic of NEC Section 250-122? - CORRECT ANSWER-Is dedicated to the
sizes of the grounding conductor
What is the NEC definition of a circuit breaker? - CORRECT ANSWER-A device
designed to trip when an overcurrent is detected.
NEC Section 300-13 provides information on? - CORRECT ANSWER-Mechanical and
Electrical continuity conductors.
What is the subject of NEC Section 250-2D? - CORRECT ANSWER-Bonding jumpers
______ are the subject of NEC Section 680-20. - CORRECT ANSWER-Electrical
installations at permanently installed pools.
Which NEC Section covers equipment grounding conductors. - CORRECT ANSWER-
NEC Section 250-118
Which NEC sections covers identification of equipment grounding conductors? -
CORRECT ANSWER-NEC Section 250-119 1-14
Which NEC Section covers ground terminal identification. - CORRECT ANSWER-NEC
Section 250-126
Bonding is the establishment of ______ connection between metal parts. - CORRECT
ANSWER-Reliable
NEC Section 250-134 provides information on what topic? - CORRECT ANSWER-
Equipment fastened or connection between metal parts.
Equipment grounding conductor _____ is (are) discussed in NEC Section 250-130. -
CORRECT ANSWER-Connections
NEC Section 250-118 states that a grounded conduct must run _____ flexible conduit. -
CORRECT ANSWER-inside
NEC Section _____ oversees bonding of flexible type conduit. - CORRECT ANSWER-
NEC Section 250.118(5)
Which NEC article covers cable trays? - CORRECT ANSWER-NEC Article 392